微接触印刷法制造聚合物多层次准三维立体微结构

直接用聚合物稀溶液作为“印墨”进行微接触印刷,制作了诸如聚苯乙烯和聚甲基丙烯酸甲酯等聚合物的微细结构,通过重复交叉盖印得到多层次准三维立体微结构,并用可聚合的双(甲苯磺酸)-2,4-己二炔-1,6-二醇脂的丙酮稀溶液作微接触印刷,观察了微条纹上的聚合.对聚合物溶液的微接触印刷的过程中溶剂挥发等因素的影响进行了观察分析,结果表明,溶剂挥发时间对微图形的准确复制是十分重要的,过长或过短的溶剂挥发时间都不利于得到清晰精确的微结构.     

甲基丙烯酸甲酯-丙烯酸乙酯辐射共聚物的NMR研究

用¹H NMR,¹³C NMR,DEPT,gHMBC 和gHSQC 等一维、二维谱研究了γ 射线辐射引发聚合的甲基丙烯酸甲酯(MMA)与丙烯酸乙酯(EA)共聚物的微观化学结构并作了归属．结果表明二种单体的聚合转化率都较高,共聚物中MMA含量略多一些．由羰基碳的共振信号测得的共聚物中单体链节的三元组含量表明,在共聚物主链结构以嵌段分布为主,这是由于MMA与EA的竟聚率差异所致．     

层离型PMMA/镁铁双氢氧化物纳米复合材料的热降解研究

通过原位聚合方法制备了以非水溶性聚合物(聚甲基丙烯酸甲酯,PMMA)为基体,与MgFe双氢氧化物(LDH)具有良好相容性的层离型纳米复合材料.采用小角、广角X射线衍射(XRD)及透射电镜(TEM)对纳米复合材料的微观结构进行了分析,通过热重分析(TG)和玻璃化转变研究了纳米复合材料在空气和氮气氛围下的热降解过程.实验结果表明,MgFe-LDH的引入显著提高了聚合物基体的热降解温度和玻璃化转变温度,纳米复合材料的热稳定性显著提高.其中含量1.6 wt%的层离型纳米复合材料在失重50%时的热降解温度比纯样提高约69℃.并且整个纳米复合体系的相容性良好,含量8.0 wt%的样品,其可见光透过率仍可达90%以上.     

聚甲基丙烯酸甲酯和聚碳酸酯各向异性光学性质理论研究

作为重要的光学薄膜材料,聚甲基丙烯酸甲酯(PMMA)和聚碳酸酯(PC)在诸多工业领域已得到广泛应用.本文利用密度泛函理论结合分子动力学方法深入系统地研究了这两种聚合物的各向异性光学性质,并对比分析了不同分子链长度和微观结构对其各向异性光学性质的影响.计算结果表明PMMA和PC都具有较高的本征双折射率,且分子链长度对本征折射率的影响显著.在可见光范围内,单体单元PMMA本征双折射率在10%以上,而三单元结构本征折射率则不到4%.对于体相结构多聚体,从立方结构拉伸到厚度仅有6?的过程中,PC不同方向折射率最大差异高达6%,而同样情况下PMMA不同方向折射率差异仅有1.3%.此项研究有助于理解PMMA和PC聚合物各向异性光学特征产生的原因和影响因素,从而进一步指导和促进其在更多领域的发展与应用.     

无规聚甲基丙烯酸甲酯链的温度系数

本文在旋转异构态理论基础上,建立了双侧基高分子链温度系数的计算公式,由此得到聚甲基丙烯酸甲脂的温度系数从间同链、无规链到全同链呈线性关系,这与实验数值一致.     

钒钼协同作用下杂多酸催化阻聚甲基丙烯酸甲酯

利用一锅法制备了Dawson型钨磷酸和钼钒磷酸,并用红外光谱和X-射线衍射表征了其结构.采用沸腾法研究了合成的杂多酸对甲基丙烯酸甲酯(MMA)的催化阻聚性能,考察了杂多酸结构、杂多酸用量和反应温度等因素对MMA本体聚合反应的影响.结果表明:钒钼元素在杂多酸催化阻聚MMA的反应中具有明显的协同作用,而且,杂多酸对MMA的催化阻聚作用随钒原子数的增加而增强,杂多酸的用量和反应温度对MMA自聚反应的速率影响较大.在过氧化苯甲酰(BPO)为0.04 g,MMA为10 mL,H9P2Mo15V3O62质量为MMA的0.06%,反应温度为101.2℃或H9P2Mo15V3O62质量为MMA的0.03%,反应温度为89.4℃时,MMA自聚反应被抑制.与传统和常用酚阻聚剂相比,Dawson型钼钒磷酸具有阻聚效果好、后处理简单、无腐蚀和污染问题等优点,能够作为MMA的阻聚剂使用.     

Structure Characterization and Thermal Properties of PMMA／Montmorillonite Nanocomposites via Emulsion Polymerization

Montmorillonite(MMT) modified with sodium silicate can change the arrangement of its layers fromedge-face and edge-edge to face-face. With the fine dispersion of the modified MMT in water, the cation-ex-change reaction was carried out with cetyltrimethyl ammonium bromide (CTAB) to obtain organo-montmoril-lonite (OMMT). As OMMT was uniformly dispersed in methyl methacrylate (MMA) monomer, PMMA/OMMT nanocomposites were formed via a common emulsion polymerization. The products were extractedwith hot acetone and characterized by FTIR, molecular weight, X-ray diffraction(XRD), transmission elec-tron microscopy(TEM), DSC and TGA. These results show that most of the OMMT layers have been exfo-liated, while the thermal stability is increased obviously. By means of FTIR spectral analysis, the ratios ofthe macromolecular radicals‘ termination of disproportionation patterns to combination are increased with theaddition of OMMT. This result further confirms the increase of the thermal degradation temperatures andglass transition temperatures of the PMMA/OMMT nanocomposites.     

Microfluidic System for Synthesis of Trigonal Selenium Nanowires

<正>A microfluidic system was developed for the synthesis of trigonal selenium(t-Se) nanowires,which was composed of a glass microchip coupled with a poly(methyl methacrylate)(PMMA) microchip.In the glass microchip, amorphous selenium(a-Se) colloid was prepared by reducing selenious acid with an excess amount of hydrazine at a temperature of 100℃.In the coupled PMMA microchip,a-Se was transformed into more stable t-Se seeds via sonication at room temperature.The residence time of the reactants in both microchips was optimized by varying the dimension and length of the microchannel each.The t-Se nanowires were formed by anisotropic growth of selenium crystallite during sonication and aging under the assistance ofβ-cyclodextrin(β-CD).Various stages of the nanowires' growth were investigated.The as-synthesized products were characterized by powder X-Ray diffraction(XRD),Raman spectroscopy,scanning electron microscopy(SEM),transmission electron microscopy(TEM) and selected-area electron diffraction(SAED).     

丙烯酸酯和甲基丙烯酸酯基团转移共聚研究

研究了三种丙烯酸酯分别和四种甲基丙烯酸酯的基团转移共聚，用１Ｈ ＮＭＲ法测定共聚物组成，扩展的Ｋｅｌｅｎ Ｔｕｄｏｓ法测定竞聚率，结果为γＭＡ＝９２３、γＭＭＡ＝００６；γＥＡ＝１４１５、γＭＭＡ＝００１；γＢＡ＝７５１、γＭＭＡ＝００２；γＭＡ＝１４４１、γＥＭＡ＝００１；γＭＡ＝１３９６、γＢＭＡ＝０２３；γＭＡ＝８６６、γｉ ＢＭＡ＝００８，表明基团转移聚合同阴离子聚合有明显的相似之处．