聚(丁二酸丁二酯-co-丁二酸丙二酯)的等温结晶行为研究

以1,4-丁二酸、1,4-丁二醇和1,3-丙二醇为原料通过直接熔融缩聚法合成了聚丁二酸丁二酯(PBS),聚丁二酸丙二酯(PPS)和聚(丁二酸丁二酯-co-丁二酸丙二酯)(PBSPS)等脂肪族聚酯.利用1H-NMR,WAXD,DSC和POM等研究了聚酯的结晶结构和结晶动力学过程等结晶行为.PBSPS的结晶晶型与PBS一致,说明只有丁二酸丁二酯(BS)单元结晶而丁二酸丙二酯(PS)单元处于无定形区.聚酯等温结晶后,在升温熔融过程中出现了多重熔融峰.分析表明多重熔融峰主要来自于聚酯升温过程中的熔融-重结晶行为.利用Avrami方程分析了聚酯的等温结晶动力学,Avrami指数n为2.2~2.8,说明聚酯等温结晶时主要以异相成核的三维生长方式进行;随着PS单元的增多,聚酯的表观结晶活化能升高,也就是说BS单元的结晶变得困难.POM观察到聚酯等温结晶时都出现了环带球晶现象,球晶形态会随着结晶温度和化学结构差异而改变.     

氯化聚乙烯弹性体的固相法合成

讨论了以固相法合成氯化聚乙烯（ＣＰＥ）弹性体的过程．实验结果表明，以固相氯化反应所得的ＣＰＥ，其大分子链上Ｃｌ取代基的分布比水相悬浮法更均匀．氯化过程的温度直接影响氯化速度及分子结构，如残留结晶、氯分布等．而聚乙烯颗粒表面与内部的氯化程度取决于氯化速度．大分子链上Ｃｌ取代基对邻近基团的氯化起阻碍作用     

氨水溶液制备ZnO纳米晶阵列的研究

以氨水和硝酸锌为前躯体，采用低温水溶液法在涂敷ZnO晶种层的玻璃衬底上外延生长了ZnO纳米棒晶阵列。应用SEM、TEM、SAED和XRD表征了ZnO纳米晶的形貌和结构。讨论了该组成体系水溶液法纳米棒外延生长的机理及其对棒晶形貌的影响。通过对水溶液pH值的原位二次调整，制备出了ZnO纳米管和表面绒毛状的棒晶阵列，基于生长机理探讨了它们的形成原因，为实现不同形貌ZnO纳米晶阵列的优化控制提供了可能的技术途径。结果表明，不同形貌的ZnO均属沿c轴择优取向的六方纤锌矿结构。     

STRUCTURE EVOLUTION OF POLYMER CHAINS FOR NECKING FORMATION IN HIGH-SPEED FIBER SPINNING PROCESS

Finite element method is used to simulate the high-speed melt spinning process,based on the equation system proposed by Doufas et al.Calculation predicts a neck-like deformation,as well as the related profiles of velocity,diameter, temperature,chain orientation,and crystallinity in the fiber spinning process.Considering combined effects on the process such as flow-induced crystallization,viscoelasticity,filament cooling,air drag,inertia,surface tension and gravity,the simulated material flow behaviors are consistent with those observed for semi-crystalline polymers under various spinning conditions.The structure change of polymer coils in the necking region described by the evolution of conformation tensor is also investigated.Based on the relaxation mechanism of macromolecules in flow field different types of morphology change of polymer chains before and in the neck are proposed,giving a complete prospect of structure evolution and crystallization of semi-crystalline polymer in the high speed fiber spinning process.     

Synthesis and Characterization of ZSM-5/β Co-Crystalline Zeolite

ZSM-5/β co-crystalline zeolites with different content of ZSM-5 have been synthesized by adding different amount of ZSM-5 to the synthetic system of β zeolite with NaAlO2, silica sol as the source of aluminum and silica, respectively, and TEA as the template under controlled condition of the synthesis. The ZSM-5/β co-crystalline zeolite was studied by XRD, SEM, BET and NH3-TPD. The reaction activity of toluene alkylation was investigated with a mixture of toluene-methanol as the feedstock in a pulse micro-reactor over the ZSM-5/β co-crystalline zeolite. It is found that ZSM-5/β co-crystalline zeolite has two kinds of zeolite structure including ZSM-5 and β zeolite, not in the form of a physical mixture. The pore structure of ZSM-5/β co-crystalline zeolites is different from that for β zeolite, ZSM-5 and their physical mixture. In addition, the peaks of both high and low temperature desorption of ammonia over the ZSM-5/β co-crystalline zeolite shift 23 ℃ to lower temperatures and the acid amount of its strong acid is 3% more than the physical mixture. So the ZSM-5/β co-crystalline zeolite produces the highest content of xylene, which is 10.4% higher than the physical mixture. And the ZSM-5/β co-crystalline zeolite has better selectivity for toluene alkylation and weaker de-methylation than β zeolite, ZSM-5 and their physical mixture.     

痕量铁的光化学伏安分析法及其应用研究

在稀硫酸介质中及活化剂草酸存在下，痕量铁（Ⅲ）对结晶紫光化学褪色反应有强烈催化作用，结晶紫的光化学反应产物于－０．７０产生一灵敏的２．５次微分级谱波。     

交联1,4—顺式聚丁二烯的取向结晶

用ＷＡＸＤ和ＳＡＸＳ研究交联１，４－顺式聚丁二烯的取向结晶。结果表明：该试样在拉伸状态时，形成折叠链片晶，而不是伸直链纤维晶。片晶之间断产生新的片晶，使长周期减小，并且片晶的横向尺寸不断增大，由此导致结晶度增大。     

聚(ε-己内酯)薄膜结晶形貌及分子取向研究

用匀胶机通过溶液铸膜方法在硅片和铝箔基板上分别制备具有不同厚度的聚(ε-己内酯)(PCL)薄膜. 通过原子力显微镜(AFM)和偏光衰减全反射傅里叶红外光谱(ATR-FTIR)对薄膜中PCL的结晶形貌、 片晶生长方式及分子链取向进行了研究. AFM结果表明, 在200 nm或更厚的薄膜中, PCL主要以侧立(edge-on)片晶的方式生长; 对于厚度小于200 nm的薄膜, PCL片晶更倾向于以平躺(flat-on)的方式生长. 这种片晶生长方式的改变在硅片和铝箔基板上都表现出同样的倾向. 此外, 在15 nm或更薄的薄膜中, PCL结晶由通常的球晶结构变为树枝状晶体. 偏光ATR-FTIR结果表明, 当膜厚小于200 nm时, 薄膜结晶中PCL分子链沿垂直于基板表面方向取向, 并且膜越薄, 取向程度越高, 与AFM的观测结果一致.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

PET伸直链结晶体的研究进展

对聚对苯二甲酸乙二醇酯（PET）在特定的结晶条件下是否生成伸直链晶体进行了论证，系统总结了伸直链晶体形成的证据，并讨论了PET伸直链晶体形成的机理。