Improving nucleation in the fabrication of high-quality 3D macro-porous copper film through the surface-modification of a polystyrene colloid-assembled template

A new approach is developed to the fabrication of high-quality three-dimensional macro-porous copper films. A highly-ordered macroporous copper film is successfully produced on a polystyrene sphere (PS) template that has been modified by sodium dodecyl sulfate (SDS). It is shown that this procedure can change a hydrophobic surface of PS template into a hydrophilic surface. The present study is devoted to the influence of the electrolyte solution transport on the nucleation process. It is demonstrated that the permeability of the electrolyte solution in the nanochannels of the PS template plays an important role in the chemical electrodeposition of high-quality macroporous copper film. The permeability is drastically enhanced in our experiment through the surface modification of the PS templates. The method could be used to homogeneously produce a large number of nucleations on a substrate, which is a key factor for the fabrication of the high-quality macroporous copper film.     

聚合物基片对柔性有机发光器件性能的影响

以聚合物基片柔性ITO膜为透明电极，制备了ITO／TPD／Alq3／Al结构柔性有机发光器件，并与在相同条件下制备的玻璃基片相同结构器件作了比较。研究了不同基片对有机材料及器件性能的影响，指出选择不易吸湿、耐温高、热胀系数小的聚合物材料，提高柔性ITO膜的附着力和导电性，结合柔性ITO膜的具体特性。优化有机层的蒸镀条件，是提高柔性有机发光器件发光亮度和稳定性的重要途径。     

基于倏逝波的光纤生物传感器研究

构建了一种以光纤束作为激发光信号和荧光信号传输通道的光纤生物传感器结构.根据光纤探针的倏逝波理论和模式匹配理论对光纤探针的几何形状进行了设计,制作了数组光纤探针并根据需要对其中一部分进行荧光标记.选择了光纤探针置于空气中和水溶液中两种情况,对光纤传感器系统进行了信号检测实验,对比标记了的和未标记的相同几何结构参数的光纤探针两者在系统中被探测的信号差异.从二者的差别区分出系统所探测的倏逝波激发的荧光信号,证明了该光纤传感器系统的可行性.     

Estimation of temperature elevation generated by ultrasonic irradiation in biological tissues using the thermal wave method

In most previous models,simulation of the temperature generation in tissue is based on the Pennes bio-heat transfer equation,which implies an instantaneous thermal energy deposition in the medium.Due to the long thermal relaxation time τ(20 s-30 s) in biological tissues,the actual temperature elevation during clinical treatments could be different from the value predicted by the Pennes bioheat equation.The thermal wave model of bio-heat transfer(TWMBT) defines a thermal relaxation time to describe the tissue heating from ultrasound exposure.In this paper,COMSOL Multiphysics 3.5a,a finite element method software package,is used to simulate the temperature response in tissues based on Pennes and TWMBT equations.We further discuss different factors in the bio-heat transfer model on the influence of the temperature rising and it is found that the temperature response in tissue under ultrasound exposure is a rising process with a declining rate.The thermal relaxation time inhibits the temperature elevation at the beginning of ultrasonic heating.Besides,thermal relaxation in TWMBT leads to lower temperature estimation than that based on Pennes equation during the same period of time.The blood flow carrying heat dominates most to the decline of temperature rising rate and the influence increases with temperature rising.On the contrary,heat diffusion,which can be described by thermal conductivity,has little effect on the temperature rising.     

CVD金刚石中的氮对等离子体刻蚀的影响

采用非对称磁镜场电子回旋共振等离子体分别对沉积过程中掺氮和未掺氮的化学气相沉积金刚石膜进行了刻蚀研究, 结果表明: 掺氮制备的金刚石膜的刻蚀主要集中在晶棱处, 经过4h刻蚀后其表面粗糙度由刻蚀前的4.761 μm下降至3.701 μm, 刻蚀对金刚石膜的表面粗糙度的影响较小; 而未掺氮制备的金刚石膜的刻蚀表现为晶面的均匀刻蚀, 晶粒坍塌,刻蚀4h后其表面粗糙度由刻蚀前的3.061 μm下降至1.083 μm. 刻蚀导致表面粗糙度显著降低. 上述差别的主要原因在于金刚石膜沉积过程中掺氮导致氮缺陷在金刚石晶棱处富集, 晶棱处电子发射加强, 引导离子向晶棱运动并产生刻蚀, 从而加剧晶棱的刻蚀. 而未掺氮金刚石膜,其缺陷相对较少且分布较均匀 ,刻蚀时整体呈现为 (111) 晶面被均匀刻蚀继而晶粒坍塌的现象. 关键词： 掺氮 金刚石膜 刻蚀 非对称磁镜场     

AMT对青铜文物缓蚀作用理论研究

：5-氨基-2-巯基-1,3,4-噻二唑（AMT）能和青铜器表面铜离子作用生成一种配位型聚合物的保护膜[AMT –Cu (Ⅰ)]n,并将其中的氯离子置换出来,避免了青铜器的进一步腐蚀。为了深入了解AMT的缓蚀作用机理,本文采用密度泛函理论（DFT）和自然键轨道理论（NBO）,在B3LYP/6-31+G（d, p）水平上对AMT中反应活性位点的确定及活性原子所带电荷和杂化形式作了分析,并利用Multiwfn波函数分析了反应前后前线轨道能的变化。结果表明,-SH基中的S原子能与Cu(Ⅱ)形成有效的共价键,而N6原子可与Cu(Ⅱ)离子形成配位键,促使聚合物膜[AMT-Cu(Ⅰ)]n的形成。并且从概念DFT的活性指数（主要为 , , , , ）比较中发现,AMT-Cu(Ⅰ)-H较AMT的亲电性指数增加,有利于形成高聚物膜,而且反应前后AMT构型中的Ｃ、N、S却始终在同一平面,而C-S和C-N键键长和键角均有不同程度的变化。     

基于亚微米光栅透射共振蛋白质检测模型研究

建立了一种基于亚微米光栅透射共振理论的蛋白质检测模型,设计了一种金属光栅型蛋白质检测生物传感器,运用光栅耦合激发表面等离子体共振理论对提出的模型进行了理论分析,通过计算机计算模拟,分析了蛋白质样品折射率、厚度等对透射率的影响。结果表明:透射率与样品折射率、厚度呈二阶多项式关系,并且厚度、折射率都随灵敏度的增加而增加。这种检测模型可应用在蛋白质检测传感方面。基于此方法的蛋白质检测模型具有同时检测蛋白质种类和含量、灵敏度高、实时、无需标记,便于集成芯片化,适用于批量生产、成本低等优点,在蛋白质芯片、生物分析、环境监测、生物器件研发等方面具有广泛的应用前景。     

入射角度对高反膜及干涉滤光片的影响

利用周期性多层介质膜的特征矩阵方法,采用MATLAB模拟计算了当入射光波并非垂直入射膜系时,高反膜反射率和法布里-珀罗干涉滤光片透过率的变化。结果表明,随着入射角度的增加,多层介质膜的工作波长向短波方向移动。并利用光程差的原理对这一现象进行了分析。     

蛋白质对纳米铕岛膜表面荧光的增强作用

将经硫辛酸修饰的铕纳米颗粒和蛋白质固定在石英玻璃表面或胶原蛋白隔离的石英玻璃表面,研究蛋白质对纳米铕岛膜荧光的增强作用.研究结果发现,在275nm激发波长下,铕纳米岛膜的荧光光谱与铕纳米颗粒溶液的荧光性质相似,且微量蛋白质的加入可以使铕纳米岛膜的荧光强度增强,但被石英玻璃片吸附后,铕纳米岛膜以及铕-蛋白质体系的荧光发射峰的位置由378.8nm红移至420nm,且胶原蛋白隔离铕纳米岛膜和滴加微量BSA蛋白质的荧光光谱相似,但荧光强度没有发生明显变化.