Friction Properties of Bio-mimetic Nano-fibrillar Arrays

Nano-fibrillar arrays are fabricated using polystyrene materials. The average diameter of each fiber is about 300 nm. Experiments show that such a fibrillar surface possesses a relatively hydrophobie feature with a water contact angle of 142°. Nanoscale friction properties are mainly focused on. It is found that the friction force of polystyrene nano-fibrillar surfaces is obviously enhanced in contrast to polystyrene smooth surfaces. The apparent coefficient of friction increases with the applied load, but is independent of the scanning speed. An interesting observation is that the friction force increases almost linearly with the real contact area, which abides by the fundamental Bowden-Tabor law of nano-seale friction.     

强场物理与快点火靶的制备

采用本体聚合技术合成全氘代聚苯乙烯（DPS），所得聚合物分子量约250000，分散度约3，氘代率为98．7％。采用热诱导相分离技术制备全氘代聚苯乙烯泡沫。在室温溶解DPS于溶剂中，然后转入轴向冷却模具，进行单向冷却，直到溶剂完全冷冻，最后取出冷冻样置于冷冻干燥仪中进行冷冻干燥，待溶剂完全脱出后即得泡沫。通过对二恶烷／环己烷混合溶剂相图，以及PS一混合溶剂体系的相图的测定，     

Self-assembly behaviour of amphiphilic diblock copolymer in selective solvents studied by synchrotron small-angle x-ray scattering

The aggregation behaviour of styrene-vinyl benzoic acid (PSm-b-PVBAn) amphiphilic diblock copolymers in selective solvents with different m and n was investigated by synchrotron small-angle x-ray scattering (SAXS). We have carried out a detailed analysis of scattering intensity, dimension, shape and microstructure of the diblock copolymers of narrow distribution in water, methanol, ethanol and isopropanol selective solvents, respectively. We have found that the aggregation behaviour of the copolymer depends on the nature of the solvent and the micelle forms fiat disc objects with the ratio of radius ω=0.4. The average radius gyration Rg of the copolymer decreases as solvents change from isopropanol to ethanol and to methanol, and increases with increasing pH in aqueous solution, but decreases with the addition of COCl2 in ethanol solvent. The scattering intensity of diblock copolymer micelle follows I(h) ∝ h^-α in different selective solutions, suggesting that the PSm-b-PVBAn coils have self-similar structure behaviour or a fractal structure in the selective solvents. All of these revealed that the aggregation behaviour of the diblock copolymer changes dramatically with experimental condition in the selective solvent. The increase of mass fractal dimension (Dm) from 2.12 to 2.47 indicates that the copolymer chain changes from a swollen coil to a rather compact disc in the course of changing solvents, decreasing surface fractal dimension (Ds) from 2.98 to 2.58 indicates that the copolymer micelle change from a rather rough surface to a smooth form in the course of increasing pH in aqueous solutions, and increasing Dm and Ds from 2.29 to 2.35 and 2.70 to 2.90, respectively, indicates the shrinkage of copolymer micelle to a rather compact and rough disc form by adding COCl2 in ethanol solvents.     

臭氧化法表面改性聚苯乙烯薄膜

 为增强聚苯乙烯(PS)与聚乙烯醇(PVA)之间的结合力,进而提高PS-VA双层空心微球存活率。利用臭氧化改性法在酸性介质中对聚苯乙烯薄膜进行表面改性,用红外光谱对处理后的表面进行了半定量的分析。结果表明：改性过后聚苯乙烯表面产生羟基、羰基等极性基团;接触角测试证明,处理后的表面由憎水变为亲水,并通过纳米压痕划痕法得到了处理前后PS与PVA薄膜之间的相互作用强度,臭氧化改性后PS与PVA膜间作用强度增大了40%。     

结构参数对聚苯乙烯光子晶体能带结构的影响

本文讨论了平板式光子晶体能带结构的计算方法,并利用平面波展开法研究了聚苯乙烯材料制作的平板式光子晶体的能带结构与晶格类型、填充比两个主要结构参数之间的关系.计算给出了晶格类型及填充比发生变化时光子禁带的变化规律.研究发现,当填充比(r/a)介于0.1～0.5之间时,四边形晶格结构和六角形晶格结构奇模和偶模均存在光子带隙,蜂窝状晶格只有偶模存在光子带隙,而且只有当填充比r/a＞0.46时才出现光子带隙.本文所得结果对聚苯乙烯光子晶体的制作和进一步应用研究奠定了理论依据.     

Preparation of Silver—Coated Polystyrene Composite Particles

We report a feasible approach to the preparation of monodispersed metal-shell composite microspheres based on a combination of surface reaction and surface seeding techniques. The method was implemented for coating polystyrene (PS) spheres with silver shell having a variable thickness by controlling the amount of reagents in the reaction procedure. These composite spherical particles in dimensions of the submicrometer range may become attractive building blocks for the creation of metallo-dielectric photonic band gap materials when they are organized into crystals.     

一种表面具有纳米孔穴的聚合物绝缘子

绝缘体表面结构和微观形貌对提高器件真空闪络特性有重要影响。首次提出了表面具有均匀分布纳米级空穴聚合物绝缘子的化学制备方法。通过本体聚合制备纳米级二氧化硅颗粒均匀分布的交联聚苯乙烯复合材料,机械加工成聚合物绝缘子后,采用氢氟酸化学腐蚀的方法将绝缘子表面氧化物颗粒去除。采用透射电子显微镜、表面电阻率和短脉冲高压测试平台分别对处理前后绝缘子的表面形貌和绝缘等性能进行了表征,结果表明:处理后的交联聚苯乙烯复合材料绝缘子的表面形成了20~50 nm直径的空穴,空穴的大小和数量分布分别由二氧化硅颗粒的粒径和加入量控制。这种具有特殊表面结构的新型绝缘子的沿面闪络电压较纯交联聚苯乙烯绝缘子提高了15%~20%,并保持了较好的力学及加工性能。研究方法和实验结果对聚合物绝缘子的表面结构设计及高性能绝缘子的研制提供了一种新的途径。     

神龙二号加速器绝缘环真空沿面闪络

在对神龙二号加速器绝缘环进行耐压考核时发现,感应腔中的绝缘支撑部件交联聚苯乙烯绝缘环在猝发多脉冲高压加载下出现的真空沿面闪络现象存在两种类型:阴极始发的闪络击穿和阳极始发的闪络击穿。通过计算绝缘环的沿面电场分布、对比击穿电压波形与绝缘环表面闪络放电烧蚀痕迹,结合小绝缘子样品实验结果对以上沿面击穿现象的机理进行了分析,认为可能是绝缘环端面与电极面的配合问题引起了加速段与注入器绝缘环击穿现象的差异。     

微接触印刷法制造聚合物多层次准三维立体微结构

直接用聚合物稀溶液作为“印墨”进行微接触印刷,制作了诸如聚苯乙烯和聚甲基丙烯酸甲酯等聚合物的微细结构,通过重复交叉盖印得到多层次准三维立体微结构,并用可聚合的双(甲苯磺酸)-2,4-己二炔-1,6-二醇脂的丙酮稀溶液作微接触印刷,观察了微条纹上的聚合.对聚合物溶液的微接触印刷的过程中溶剂挥发等因素的影响进行了观察分析,结果表明,溶剂挥发时间对微图形的准确复制是十分重要的,过长或过短的溶剂挥发时间都不利于得到清晰精确的微结构.