Efficient Visible Electroluminescence from Porous Silicon Diodes Passivated by Carbon Films

By using n-butylamine as a carbon resource,carbon film is deposited on the p-n porous silicon (PS) surface with a radio-frequency glow discharge plasma system.Raman spectra and infrared reflection (IR) spectra of the carbon films indicate that there are amine-group and hydrogen atoms therein.The IR spectra of the passivated PS samples exhibit that the PS surfaces are mainly covered with Si-C,Si-N and Si-O bonds.Electroluminescence (EL) spectra show that the EL intensity of the passivated PS diodes increases greatly and the blueshift of the EL peak occurs compared with the diodes without treatment.Both of these are stable while the passivated diodes are exposed to the air indoors.The I-V characteristics reveal that the passivated diodes have a smaller series resistance and a lower onset voltage.The influence of the carbon film passivation on EL properties of PS has also been discussed.The results have proven that carbon film passivation is a good way to enhance the PS luminescent intensity and stability.     

关于半线性热方程整体解的注记

利用Besov空间的热核刻画及压缩映射原理,研究半线性热方程ut-△u＝u|u|a的初值问题,得到了当初值u0∈Lp0(Rn)且||u0||(B·)p-n (1/p0-1/p),∞(Rn)(p0＝na/2,p＞p0)充分小时,整体解的存在性及在一定条件下解的惟一性.     

Photoluminescence Characterization of Silicon Nanoparticles Hybridized Europium Complex

A europium complex Eu (DBM)3 TPPO (Eu tris(benzoylmethide)-(triphenylphosphine oxide)) and silicon nanoparticles have been hybridized.The hybridization can evidently change the photoluminescence (PL) characteristics of the Eu complex in the following aspects:under an excitation of 390nm,the intensity of the PL peak at 611nm due to the ^5Du-^7F2 transition of the Eu^3 ions has been increased by 30%,and thc integrated PL intensity in the visible range has been increased by nearly 3 times;the PL excitation efficiency beyond 440nm has been improved cvidently;the peak in the PL excitation spectrum shifts from 408nm to 388nm,and the PL decay time decreases from 2.07 to 0.96μs,The experimental results indicatde that in the PL process,the photoexcited energy may transfer from the silicon nanoparticlcs to the Eu^3 ions.     

热动力学问题的数值计算

 对含热传导的流体动力学方程组，用有限元方法进行数值求解。采用傅里叶热传导计算热流、用热流连续条件计算单元间接触面的温度、用三角形传热法计算体单元表面的热流，考虑各向同性弹塑性流体材料模型、三项式物态方程和导热系数与状态的相关性，给出了傅里叶热传导、接触传热、热应力应变效应、以及混合物冲击压缩特性等算例。对混合物冲击温度的数值模拟表明，小颗粒混合物在冲击压缩过程中，颗粒间的温度有差别、稍有波动，并随时间趋向于一致，以至热平衡。     

像增强器用中波红外辐射可激励的新型荧光材料

1 引言目前,许多研究都集中于研制各种用途的中波红外成像系统。这些应用从工业用热成像一直扩展到探测车辆、导弹等的军用热成像。可反映中波红外成像目前技术水平的是加工碲镉汞、锑化铟等半导体探测器的线阵或面阵,并把它们组装到一适当光学成像系统。但是,材料和器件的产额低,这种器件不仅制作难而且成本高。本文介绍一种加工成本低用于中波红外成像的新型探测介质,具体地讲,这种新介质是一种可将中波红外     

四次C-曲线的性质及其应用

以1,t,t2,t3,…为基底的Bézier曲线和B样条曲线是构造自由曲线、曲面强有力的工具.但是它们不能精确地表示某些圆锥曲线如圆弧、椭圆等,也不能精确地表示正弦曲线.本文利用一组新的基底sint,cost,t2,t,1,构造了两条新的曲线,这两条曲线依赖于参数α>0.当α→0时极限分别是四次Bézier曲线和四次B样条曲线,称之为四次C-曲线:四次C-Bézier曲线和四次C-B样条曲线.它们具有一般Bézier曲线和B样条曲线的性质:如端点插值,凸包,离散等,还可以精确的表示圆弧、椭圆及正弦曲线.作为应用,文章最后给出了四次C-Bézier曲线表示正弦曲线的条件.     

关于半线性热方程的死角性质

本文考虑下述问题：这里，．本文证明了在发生死角时只有有限个死角点．     

声致冷和声制冷机

本文介绍声致冷的基本原理、有关的数量关系和美国 ＬｏｓＡｌａｍｏｓ实验室推出的一台实验声制冷样机及其性能。     

增长曲线模型回归系数线性估计的可容许性

本文讨论增长曲线模型回归系数线性估计的可容许性，给出了常见的三种形式不同的可容许性定义．我们在较特殊的齐次（或非齐次）线性估计类中，证明了这三种容许性的一致性，并且得到了其共同的可容许估计的充要条件．