稀土纳米复合氧化物RE2O3：Eu（RE=Y，Gd）的制备及特性

以甘氨酸辅助的燃烧法和非晶态稀土DTPA配合物前驱体热分解法制备了Y2O3:Eu和Gd2O3:Eu纳米材料。X射线衍射表明燃烧法和配合物前驱体热分解法制备的纳米Y2O3：Eu均为立方相,而GdO3:Eu纳米材料则随制备条件不同可得到立方相或单斜相两种产物,发射光谱证实了这一结论。通过透射电子显微镜、扫描电子显微镜对不同方法制备的纳米材料的尺寸、形貌也进行了表征。     

基于TGA-FTIR联用技术的EVA热解研究

采用热重-傅里叶变换红外光谱联用技术研究了在N2气氛下乙烯-乙酸乙烯酯共聚物(EVA)的热稳定性及其分解失重情况；实验首先单独使用热重分析仪考察了EVA在不同升温速率下的失重情况；然后采用热-红联用技术对EVA失重过程中的逸出气体进行考察；由实验结果可以明显地看出，EVA的分解失重分为两个阶段，并且随着升温速率的增大EVA的起始失重温度有所增加；第一个失重阶段所放出的气体经傅里叶变换红外光谱扫描并与标准气相谱库中乙酸的标准红外谱图对照后确定为乙酸，第二个失重阶段是由于碳氢链段的分解而引起的；最后根据升温速率为5℃／min时EVA第一个失重阶段的失重率计算得出EVA样品中乙酸乙烯酯的含量为31．8%(ω)。     

基于3-羧基-5-氨基-1，2，4-三唑的Cd（Ⅱ）配合物的合成、晶体结构及催化性能

三唑类含能配合物在含能材料领域受到广泛关注。利用溶液法合成了一例含能配合物[Cd （Hatzc）₂（H₂O）]（LH1）,其中H₂atzc=3-羧基-5-氨基-1,2,4-三唑,并用X射线单晶衍射、元素分析、红外光谱等手段进行表征。单晶结构分析结果表明LH1属于单斜晶系,空间群为P2₁/n,呈一维链状结构,通过氢键相互作用形成三维超分子结构。LH1的爆速（D=10.4 km·s^-1）、爆压（p=55.2 GPa）、爆轰能量（16.51 kJ·g^-1）和密度（2.363 g·cm^-3）均优于大多数含能配合物。撞击感度（>40 J）和摩擦感度（>360 N）表明LH1对撞击和摩擦的敏感性较低。高氯酸铵（AP）的催化热分解结果表明,在LH1的催化作用下,AP的高温分解峰提前38℃,释放的热量在较短的时间增加0.46 kJ·g^-1,说明LH1对AP热分解具有良好的催化效果。     

不同晶相WO3的热分解法制备及其光催化性能

以钨酸铵为钨源,硝酸为沉淀剂,首先通过沉淀法制备前驱体H2 WO4,随后采用热分解H2 WO4法合成六方及单斜晶相WO3催化剂.利用X射线衍射(XRD)、拉曼光谱、差热-热重(TG-DTA)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)及紫外-可见漫反射光谱(UV-Vis DRS)对H2 WO4向WO3转变过程中结构、形貌、组成及光学性质的变化进行研究.结果表明,热处理后前驱体发生如下相变过程:H2 WO4→六方相WO3→六方/单斜相WO3→单斜相WO3.此外,以罗丹明B为模拟污染物,考察不同晶相WO3的光催化活性,结果表明,六方相WO3具有更高的光催化性能,单斜相WO3的活性较低.     

热分解法制备Fe_2O_3修饰的TiO_2纳米管阵列及其光电性能研究

为提高TiO_2纳米管阵列(TiO_2-NTs)的可见光活性,通过阳极氧化和热分解法制备了Fe_2O_3纳米粒子修饰的TiO_2纳米管阵列(Fe_2O_3/TiO_2-NTs)。通过扫描电子显微镜(SEM),透射电子显微镜(TEM)和紫外-可见光漫反射光谱(UV-vis DRS)等对产物进行了相关表征,同时测试了产物的光电性能及其光催化降解甲基橙的性能。结果显示,Fe_2O_3/TiO_2-NTs的光电流强度和光催化降解率分别是是TiO_2-NTs的19倍和8.7倍。     

Theoretical Study and NBO Analysis of the Decomposition Kinetics of Oxetane, 2-Methyloxetane and 2,2-Dimethyloxetane

A theoretical study of the thermal decomposition kinetics of oxetane (1), 2-methyloxetane (2), and 2,2-dimethyloxetane (3) has been carried out at the B3LYP/6-311+G**, B3PW91/6-311+G**, and MPW1PW91/6-311+G** levels of theory. The MPW1PW91/6-311+G** method was found to give a reasonable good agreement with the experimental kinetics and thermodynamic parameters. The decomposition reaction of compounds 1～3 yields formaldehyde and the corresponding substituted olefin. Based on the optimized ground state geometries using MPW1PW91/6-311+G** method, the natural bond orbital (NBO) analysis of donor-acceptor (bond-antibond) interactions revealed that the stabilization energies associated with the electronic delocalization from σC3-C4 bonding to σ*O1-C2 antibonding orbitals decrease from compounds 1 to 3. The σC3-C4→σO1-C2 resonance energies for compounds 1～3 are 2.63, 2.59 and 2.45 kcal mol-1, respectively. Further, the results showed that the energy gaps between σC3-C4 bonding and σ*O1-C2 antibonding orbitals decrease from compounds 1 to 3. Also, the decomposition process in these compounds are controlled by σ→σ* resonance energies. Moreover, the obtained order of energy barriers could be explained by the number of electron-releasing methyl groups substituted to the Csp3 atom (which is attached to oxygen atom). NBO analysis shows that the occupancies of σCsp3-O bonds decrease for compounds 1～3 as 3<2<1, and those of σCsp3-O bonds increase in the opposite order (3 > 2 > 1). This fact illustrates a comparatively easier thermal decomposition of the sCsp3-O bond in compound 3 compared to compound 2, and in compound 2 compared to compound 1. NBO results indicate that these reactions are occurring through a concerted and asynchronous four-membered cyclic transition state type of mechanism.     

不同阳离子Y分子筛上金属络合物的吸附和分解 Ⅱ.Co(CO)_3NO吸附和分解的红外光谱表征

采用红外光谱表征了含不同阳离子的Ｙ分子筛上Ｃｏ（ＣＯ）３ＮＯ的吸附和分解及其和阳离子的作用．结果表明，Ｃｏ（ＣＯ）３ＮＯ吸附后主要形成Ｃｏ（ＣＯ）ｘＮＯ（ｘ＝２，３），并出现热稳定性较高的Ｃｏ（ＮＯ）２＋２．产生Ｃｏ（ＮＯ）２＋２的机制和最终分解产物与分子筛阳离子的性质有关．ＮａＹ上Ｃｏ（ＣＯ）ｘＮＯ歧化产生少量Ｃｏ（ＮＯ）２＋２，分解产物主要为Ｃｏ（０）；ＣｏＹ中Ｃｏ２＋的存在部分避免了Ｃｏ（ＣＯ）ｘＮＯ的歧化，分解得到的Ｃｏ（０）含量较高；ＮｉＹ，尤其ＣｕＹ阳离子和吸附物种发生电子转移，形成ＮＯ＋中间物种，氧化Ｃｏ（０）产生Ｃｏ（ＮＯ）２＋２，分解产物为Ｃｏ（０）和Ｃｏ（Ⅱ）的混合物．     

Evaluation of Thermal Hazard of Composite Modified Double-base Propellant by Microcalorimetery Method

<正>The thermal decomposition behavior of composite modified double-base(CMDB) propellant containing cyclotrimethylene trinitramine(RDX) was studied via a Calvet microcalorimeter at five different heating rates.The activation energy(E) and the pre-exponential factor(A) of two obvious exothermic processes were obtained by Kissinger's method and Ozawa's method.The entropy of activation(△A~≠),the enthalpy of activation(△H~≠),and the free energy of activation(△G~≠) of the first stage were calculated.To evaluate the thermal hazard of the RDX-CMDB propellant, the critical temperature of thermal explosion(T_b),the self acceleration decomposition temperature(T_(SADT)),the adiabatic decomposition temperature increment(△T_(ad)) and the time-to-explosion of adiabatic system(t) were presented as 145.3℃,138.15℃,1634 K and 583.71 s(n=0) and 586.28 s(n=1),respectively.     

Non-isothermal Decomposition Mechanism and Kinetics of LiClO4 in Nitrogen

The non-isothermal decomposition kinetics of LiClO4 in flow N2 atmosphere was studied.TG-DTA curves show that the decomposition proceeded through two well-defined steps below 900°C,and the mass loss was in agreement with the theoretica1 value.XRD profile demonstrates that the product of the thermal decomposition at 500°C is LiCl.For the decomposition kinetics study,the activation energies calculated with the Friedman method were considered as the initial values for non-linear regression and were used for verifying the correctness of the fitted models.The decomposition process was fitted by a two-step consecutive reaction:extended Prout-Tompkins equation[Bna,f (α) is (1?α)nα a] followed by a 1th order reaction(F1).The activation energies were (215.6±0.2) and (251.6±3.6) kJ/mol,respectively.The exponentials n and a for Bna reaction were (0.25±0.05) and (0.795±0.005),respectively.The reaction types and activation energies were in agreement with those obtained from the isothermal method,but the exponentials were optimized for better fitting and prediction.     

海泡石对膨胀阻燃聚丙烯燃烧和热分解的影响

将改性后的海泡石添加到聚磷酸铵(APP)和双季戊四醇(DPER)膨胀阻燃聚丙烯(PP/IFR)体系中,采用氧指数(LOI)、热重分析(TGA)、光电子能谱(XPS)、傅里叶变换红外(FTIR)光谱、锥形量热仪(CONE)和扫描电镜(SEM)考察其对膨胀阻燃体系的催化协效作用,探讨作用机理.LOI结果表明,改性的海泡石比纳米水滑石和有机改性的蒙脱土有更好的催化协效作用.CONE数据证实,海泡石可以降低膨胀阻燃聚丙烯体系的热释放速率和总的热释放量.通过观察SEM图片发现,海泡石可以改善膨胀炭层的形貌,提高炭层的隔热隔质性能.TGA结果表明,在氮气和空气气氛下,海泡石均可以提高膨胀炭层的热稳定性,增加高温时残余物的量,其主要作用对象为APP.FTIR和XPS测试发现加热过程中海泡石可以与APP发生化学反应,形成P—O—Si键,增加了APP高温时的稳定性.