Measurement of Diffusion Coefficient of Liquids by Using an Asymmetric Liquid-Core Cylindrical Lens： Observing the Diffusion Process Directly

We report a method for measuring diffusion coefficient D of liquids by using an aplanatic and asymmetric cylinder lens with a liquid core, which is designed as both a diffusion pool and the main imaging element. The precision is better than 10-4 RIU in measuring refractive index. The D values of ethylene glycol （EG） in water are measured for various EG concentrations at 25℃, and Dinf = 1.043 × 10^-5 cm^2/s under the condition of infinite dilution is obtained. The method is characterized by observing the diffusion process directly, faster measurement and obtaining the D value under the condition of infinite dilution.     

固液混合装药热传导特性对其安全性影响的计算研究

固液混合装药物理参数是影响装药安全性的主要因素之一,利用混合炸药计算物理参数的方法,计算了几种典型配比装药的物理参数,根据能量守恒方程对不同物理参数的装药进行数值模拟。计算得到:在温度载荷相同的条件下,不同的物理参数对其温度响应有较大的差别,说明分析固液混合装药安全性时,应考虑装药不同比例对其安全性的影响,才能真实反应热点能量演化过程,为分析固液混合装药的安全性提供一定的理论依据。     

Oscillation of coercivity between positive and negative in MnxGe1-x：H ferromagnetic semiconductor films

Amorphous MnxGe1-x :H ferromagnetic semiconductor films prepared in mixed Ar with 20% H2 by magnetron cosputtering show global ferromagnetism with positive coercivity at low temperatures. With increasing temperature, the coercivity of MnxGe1-x :H films first changes from positive to negative, and then back to positive again, which was not found in the corresponding MnxGe1-x and other ferromagnetic semiconductors before. For Mn0.4Ge0.6 :H film, the inverted Hall loop is also observed at 30 K, which is consistent with the negative coercivity. The negative coercivity is explained by the antiferromagnetic exchange coupling between the H-rich ferromagnetic regions separated by the H-poor non-ferromagnetic spacers. Hydrogenation is a useful method to tune the magnetic properties of MnxGe1-x films for the application in spintronics.     

热解析富集-能量色散X射线荧光光谱法对溶液中汞的测定

搭建热解析富集装置对溶液中的汞富集后进行检测,可以提高X射线荧光测试的灵敏度.整个测试过程如下:样品中的汞在高温下发生热解析,经过滤膜时被选择性吸附,在使用光谱仪测试后,最终计算出样品中汞的含量.在热解析管路中加入白云石增加停留时间,可以降低汞的热解还原温度,在使用汞稳定化剂的条件下,只需加热到600℃就可以实现汞的解...     

BLM成膜液中胆固醇与卵磷脂相互作用的光谱学研究

结合胆固醇与卵磷脂的拉曼光谱,分析了BLM成膜液中胆固醇与卵磷脂的相互作用。得出膜液中胆固醇与卵磷脂的最佳配比为1∶4。室温下,电化学实验的结果表明,以此种比例配置的膜液使膜的稳定性得到提高,导电率减小。     

X射线天文望远镜的进展

综述了近年来X射线天文望远镜(如准直型望远镜、编码孔径望远镜、正入射周期多层膜望远镜、掠入射单层膜望远镜和掠入射非周期多层膜望远镜以及新型的“龙虾眼”型望远镜)的发展；阐述了各种X射线天文望远镜工作的原理和成像特点，指出各种X射线天文望远镜之间的性能是相互补充的；简要说明了国内近年来在X射线天文望远镜研究方面取得的进展，并展望了下一步工作．     

Co-Ni合金纳米线有序阵列的制备与磁性研究

关键词：     

恒流电晕充电对聚四氟乙烯多孔薄膜驻极体驻极态的影响

利用常温下恒流和恒压电晕充电、充电后的等温表面电位衰减、热刺激放电和扫描电镜等实 验手段研究了恒流和恒压电晕充电技术对聚四氟乙烯多孔薄膜驻极体驻极态的影响.与恒压电晕充电相比较，恒流电晕充电时由于流过薄膜的电流恒定，增加了注入电荷在多孔结构厚度方向界面处的俘获概率，使沉积电荷密度上升，改善了驻极体的储电能力.然而，这些位于不同层深多孔界面处的俘获电荷在这类功能膜储存或使用过程中，经外激发从脱阱位置 以跳动（hopping）模式输运至背电极的路径相对缩短将导致脱阱电荷衰减较快. 关键词： 恒流电晕充电 聚四氟乙烯多孔膜 驻极体 电荷稳定性     

Pt/GdFeCo/Pt多层膜的磁性和反常霍尔效应研究

亚铁磁材料因具有反铁磁排列的子晶格磁矩而表现出诸多丰富的物理性质,在磁信息存储和逻辑领域具有广阔的应用前景.本文采用磁控溅射方法在热氧化的硅基片上制备了Pt/GdFeCo(t)/Pt多层膜,系统研究了亚铁磁GdFeCo厚度对多层膜的表面形貌、结构、磁性以及反常霍尔效应(AHE)的影响.结构测试表明薄膜表面粗糙度较小,且GdFeCo层为非晶态;实验中利用GdFeCo层厚度可有效控制Gd元素含量,从而调控GdFeCo趋近反铁磁态特性的磁矩补偿点;通过重金属强自旋轨道耦合效应(SOC)和非晶态亚铁磁薄膜面内压应力,实现了良好垂直各向异性(PMA);进一步阐明了亚铁磁薄膜中磁性和反常霍尔效应的内在产生机制以及磁矩补偿点与温度的内在关系.这些结果为构建新一代低功耗自旋电子器件奠定基础.     

THEORY OF DIELECTRIC ELASTOMERS

In response to a stimulus, a soft material deforms, and the deformation provides a function. We call such a material a soft active material （SAM）. This review focuses on one class of soft active materials： dielectric elastomers. When a membrane of a dielectric elastomer is subject to a voltage through its thickness, the membrane reduces thickness and expands area, possibly straining over 100%. The dielectric elastomers are being developed as transducers for broad applications, including soft robots, adaptive optics, Braille displays, and electric generators. This paper reviews the theory of dielectric elastomers, developed within continuum mechanics and thermodynamics, and motivated by molecular pictures and empirical observations. The theory couples large deformation and electric potential, and describes nonlinear and nonequilibrium behavior, such as electromechanical instability and viscoelasticity. The theory enables the finite element method to simulate transducers of realistic configurations, predicts the efficiency of electromechanical energy conversion, and suggests alternative routes to achieve giant voltage-induced deformation. It is hoped that the theory will aid in the creation of materials and devices.