等离子体电极棚电光开关实验研究

 设计建造了以辉光放电形成的等离子体作电极，通光口径为80mm×80mm的普克尔盒实验，实验检测了它的开关性能。阐述了普克尔盒的结构，辉光放电等离子体电极的形成，开关驱动脉冲的产生及输出特性，电光开关的开关效率和开关速度的检测方法，给出了典型的实验结果。     

Effects of E2 and El-E2 Interference on Coulomb Dissociation of 19C

We investigate the effects of higher order multipole transitions, in particular electric quadrupole （E2） and El-E2 interference, on the Coulomb dissociation of 19 C within the framework of the first order eikonal approximation. The sensitivity of the total Coulomb breakup cross section and the longitudinal momentum distribution of the core fragment to these effects are checked. The breakup occurs predominately through the dipole transition and the contribution of E2 transition to the total cross section is found to be within the range from 1 to 3% of that of El. It is further observed that the El-E2 interference term contributes nothing to the integrated cross section. On the other hand, the longitudinal momentum distribution is observed to be insensitive to the E2 transition while the El-E2 interference introduces a small asymmetry in its shape.     

Enhanced Efficiency of Polymer： Fullerene Bulk Heterojunction Solar Cells with the Insertion of Thin TiO2 Layer near the LiF/A1 Electrode

The insertion layer of TiO2 between polymer-fullerene blend and LiF/AI electrode is used to enhance the shortcircuit current Isc and fill factor （FF）. The solar cell based on the blend of poly[2-methoxy-5-（2＇-ethylhexyloxy）- 1,4-phenylenevinylene] （MEH-PPV） and C60 with the modifying layer of TiO2 （about 20nm） shows the open- circuit Voc of about 0.62 V, short circuit current Isc of about 2.35 mA/cm^2, filling factor FF of about 0.284, and the power conversion efficiency （PCE） of about 2.4% under monochromatic light （50Onto） photoexcitation of about 17mW/cm^2. Compared to ceils without the TiO2 layer, the power conversion efficiency increases by about 17.5%. Similar effect is also obtained in cells with the undoped MEH-PPV structure of ITO/PEDOT：PASS/MEH- PPV/（TiO2）LiF/AI. The improved solar cell performance can be attributed to enhanced carrier extraction efficiency at the active layer/electrode interfaces when TiO2 is inserted.     

从碳核的研究中理解星体的形成

尽管在20世纪50年代科学家们就首次发现了星体如何集聚原子核，他们现在仍然无法给出在很宽的温度范围内决定着3仅过程（3α过程是指3个氦原子核转变为碳的过程，在晚期红巨星和红超巨星中，星体温度超过10^8K时这个过程才能发生）的反应率的碳原子核的关键属性．现在，由于使用同位素在线分离方法产生和分离同位素，以及粒子探测器的发展，研究者们已经可以解决这个难题．     

^13C的一个可能的类晕的中子1p态

假设^13C是单粒子的2p态的结构，用Glauber多重散射理论研究了入射能量为1GeV的质子在^13C上的弹性散射，得到了与实验符合得很好的理论结果。这说明^13C可能存在着一个类晕的中子皮。     

Deposition of Diamond-Like carbon Films by High-Intensity Pulsed Ion Beam Ablation at Various Substrate Temperatures

Diamond-like carbon (DLC) films have been deposited on to Si substrates at substrate temperatures from 255℃ to 400O℃ by a high-intensity pulsed-ion-beam (HIPIB) ablation deposition technique. The formation of DLC is confirmed by Raman spectroscopy. According to an x-ray photoelectron spectroscopy analysis, the concentration of sp^3 carbon in the films is about 40% when the substrate temperature is below 300℃ C. With increasing substratetemperature from 25℃ to 400℃, the concentration of sp^3 carbon decreases from 43% to 8%. In other words,sp3 carbon is graphitized into sp^2 carbon when the substrate temperature is above 300℃. The results of xray diffraction and atomic force microscopy show that, with increasing the substrate temperature, the surface roughness and the friction coefficient increase, and the microhardness and the residual stress of the films decrease.     

Continuous-Wave Four-Wave Mixing via Electromagnetically Induced Transparency in Double-∧ Configuration

We investigate continuous-wave four-wave mixing via electromagnetically induced transparency in double-∧ con-figuration by using Schroedinger-Maxwell formalism. We derive the corresponding explicit analytical expressions.