内含C_(60)掺杂空穴传输层的量子点电致发光器件

聚乙烯咔唑(PVK)中掺入富勒烯(C60)的重量比从0%到10%变化,以研究在空穴传输层中掺杂C60后对量子点电致发光器件性能的影响。掺入C60后的PVK薄膜在氧化铟锡(ITO)基底上均方根粗糙度从3 nm降至1.6 nm。另外,掺入C60后有利于空穴的注入和传输,改善器件中电子和空穴的平衡,提高了器件的效率。     

氮掺杂长竹节状碳纳米管的制备及其生长机理

采用电弧放电法,通过阳极棒与不锈钢片的共蒸发,制备了氮掺杂长竹节状碳纳米管(NDLBLCNTs)。借助扫描电子显微镜(SEM)、场发射高分辨透射电子显微镜(HRTEM)及其附带能量色散X射线(EDX)光谱仪和电子能量损失谱(EELS)、透射电子显微镜(TEM)等表征方法,对产物的形貌、结构和组成进行表征。表征结果表明,NDLBLCNTs的长度在640~835 nm之间,其内径在23~35 nm之间,外径在28~47 nm之间;且在每一节"竹节"与另一节"竹节"的连接处形成的内腔中均有一个黑色纳米颗粒,其直径尺寸以及产物中的NDLBLCNTs的含量均与熔化、蒸发的不锈钢片的面积有关。对NDLBLCNTs的生长机理进行了简单的探讨。     

惰性盐辅助合成介孔石墨化碳片及其电容性能

以惰性盐KCl为模板、硝酸镍为金属催化剂镍源、葡萄糖为碳源,通过碳化处理制备了介孔石墨化碳片。利用扫描电子显微镜、透射电子显微镜、X-射线衍射仪和比表面测试仪对介孔石墨化碳片进行了表征。探讨了碳片形成的机理,采用三电极测试体系研究了介孔石墨化碳片电极材料的电化学性能。结果表明,10 g KCl制备的碳片比表面积最大(989 m2·g-1),在6 mol·L-1KOH电解液中,当电流密度为0.5 A·g-1时,比电容达到180 F·g-1;当电流密度达到10 A·g-1时,比电容维持在148 F·g-1,显示了电极具有较好的倍率性能;在10 A·g-1条件下,2 000次循环充放电测试后电容没有发生衰减,展示了在超级电容器方面的应用潜力。     

Simultaneous determination of dihydroxybenzene isomers utilizing a thiadiazole film electrode

The present study reports a sensitive electro-analytical method for the simultaneous determination of dihydroxybenzene isomers by using a thiadiazole film electrode, which was readily prepared by electropolymerization of 2,5-dimercapto-1,3,4-thiadiazole on a glassy carbon electrode with cyclic voltammetry. The functionalized electrode has a distinguishable and sensitive response to dihydroxybenzene isomers. Under the optimized conditions, the linear stripping peak currents showed good linear relationships with hydroquinone, catechol and resorcinol at concentration ranges 0.50-120, 0.50-110 and 1.00-110 μmol/L, and the detection limits are 0.1, 0.1 and 0.3 μmol/L, respectively. The proposed method is applicable to the simultaneous determination of dihydroxybenzene isomers in real samples with the relative standard deviations of less than 5.7% and the recovery rates of 95.6%-106%. The constructed electrode is characterized by simple preparation, good selectivity, and high sensitivity advantages.     

Influence of Gd doping on the absolute quantum efficiency and lifetime of EuxGd1-x（TTA）3phens

Absolute quantum yield （Ф） is one of the most important parameters to evaluate the potential of novel materials. Lanthanide complexes EuxGd1-x（TTA）3phens are synthesized with the ratio of Gd3＋ dopant concentration ranging from 10% to 90% to improve the absolute quantum yield. EuxGd1-x（TTA）3phens possess similar infrared and ultraviolet spectra, showing that they have similar molecular structures. The absolute emission quantum yields of EuxGd1-x（TTA）3phens are determined using a fluoromax-4 spectrofluorometer equipped with an integrating sphere. The fluorescence lifetimes of the EuxGd1-x（TTA）3phens are measured in the same experiment. It was found that both absolute quantum yields and fluorescence lifetimes of EuxGd1-x（TTA）3phens are of quasi-periodic variation with the change of the Gd3. dopant concentrations. The absolute quantum efficiency and fluorescence lifetime vary with respect to the Gd content in an opposite fashion, indicating that the rate of energy absorption by the EuxGd1-x（TTA）3phens and the conversion to light energy is critical for the absolute quantum efficiency. The radiative rate constant Kr and non-radiative rate constant Knr are calculated. The dependence of Kr and Knr on the Gd3＋ dopant concentrations is very similar to that of absolute quantum efficiency. The radiation rate constant Kr and absolute quantum efficiency have a linear relationship.     

Determination of silver ion based on the redshift of emission wavelength of quantum dots functionalized with rhodanine

A simple and selective method for the determination of silver ions was developed by utilizing the red- shift in emission wavelength of the core-shell CdSe/Cd5 quantum dots （QDs） functionalized with rhodanine upon the addition of Ag＋. A linear relationship was observed between the shift and the increase in concentration of Ag＋ in the range of 0.0125-12.5 μmol/L. The mechanism of the red-shift was investigated and suggested that the coordination between Ag＋ and rhodanine on the QDs surface caused an increase of particle size, which resulted in the red-shift of the QDs＇ emission wavelength. A detection limit of 2 nmol/L was achieved. The developed method showed superior selectivity and was successfully applied to the determination of silver in environmental samples.     

Electrochemical sensor based on f-SWCNT and carboxylic group functionalized PEDOT for the sensitive determination of bisphenol A

A simple,sensitive,and reliable method for the voltammetric determination of bisphenol A(BPA) by using carboxylic group functionalized single-walled carbon nanotubes(f-SWCNT)/carboxylic-functionalized poly(3,4-ethylenedioxythiophene)(PC4) complex modified glassy carbon electrode(GCE) has been successfully developed.The electrochemical behavior of BPA at the surface of the modified electrode is investigated by electrochemical techniques.The cyclic voltammetry results show that the as-prepared electrode exhibits strong catalytic activity toward the oxidation of BPA with a well-defined anodic peak at 0.623 V in PBS(0.1 mol/L,pH 7.0).The surface morphology of the 3D network of composite film is beneficial for the adsorption of analytes.Under the optimized conditions,the oxidation peak current is proportional to BPA concentration in the range between 0.099 and 5.794 μmol/L(R~2 = 0.9989),with a limit of detection of 0.032 μmol/L(S/N = 3).The enhanced performance of the sensor can be attributed to the excellent electrocatalytic property of/-SWCNT and the extraordinary conductivity of PC4.Furthermore,the proposed modified electrode displays high stability and good reproducibility.The good result on the voltammetric determination of BPA also indicates that the asfabricated modified electrode will be a good candidate for the electrochemical determination and analysis of BPA.     

Asymmetric catalytic anhydride openings via carbon-based nucleophiles

The asymmetric desymmetrization of cyclic anhydrides via the addition of carbon-based nucleophiles has been the focus of considerable levels of interest because it leads to optically active products. Over the past 20 years, a variety of different catalytic asymmetric alkylation reactions have been developed for the desymmetrization of cyclic anhydrides using different metal reagents as nucleophiles and using chiral ligands. The purpose of this review is to provide an overview of significant developments in this field. ~ 2013 Fen-Er Chen. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Allyl phthalazinone synthesis,polymerization and polymer properties

A phthalazinone monomer with an allyl group, i.e. 4-（3-allyl-4-hydroxyphenyl）phthalazin-1（2H）-one, was synthesized and then copolymerized with 4-（4-hydroxylphenyl）（2H）-phthalazin-1-one and 2,6- diflurobenzonitrile by means of aromatic nucleophilic polycondensation to provide a series of crosslinkable poly（aryl ether nitrile）s. The virgin copolymers exhibited good solubility in polar organic solvents with relative high molecular weights （Mw： 45,130-58,403, inherent viscosities： 0.58-0.75 dL/ g）. After cross-linking, the thermal stability and solvent resistance of the polymer increased.     

Sulfur/carbon composites prepared with ordered porous carbon for Li-S battery cathode

Ordered porous cabon with a 2-D hexagonal structure,high specific surface area and large pore volume was synthesized through a twostep heating method using tri-block copolymer as template and phenolic resin as carbon precursor.The results indicated the electrochemical performance of the sulfur/carbon composites prepared with the ordered porous carbon was significantly affected by the pore structure of the carbon.Both the specific capacity and cycling stability of the sulfur/carbon composites were improved using the bimodal micro/meso-porous carbon frameworks with high surface area.Its initial discharge capacity can be as high as 1200 mAh·g~(-1) at a current density of 167.5 mA·g~(-1)The improved capacity retention was obtained during the cell cycling as well.