Single＆Two—photon Excited Fluorescence of Two New Compounds with 2—Benzothiazoly as Electron Acceptor

Two new D-x-A type compounds,where electron-donor D is tertiary amino group,electron-acceptor A is 2-benzothiazolyl and x is two conjugated styryl units,have been synthesized.They are named as trans,trans-2-{4-[4-(N,N-diethylamino)styryl]styryl}-1,3-benzothiazole and trans,trans-2-{4-[4-(N,N-diphenylamino)styryl]styryl}-1,3-benzothiazole.Both compounds show strong two-photon excited fluorescence in yellow-orange region when excited by a femtosecond laser at 800nm.     

复方单硝酸异山梨酯-阿司匹林双缓释微丸胶囊的研制(Ⅱ)

以乙基纤维素、丙烯酸树脂Ⅱ和丙烯酸树脂Ⅲ为骨架材料分别制备单硝酸异山梨酯和阿司匹林混合骨架缓释微丸，并通过包薄膜衣进一步控制药物的释放。通过测定微丸的释放度对处方工艺进行评价，选择最佳微丸灌装胶囊．胶囊中两种药物均达到良好的缓释效果。符合中国药典对缓释制剂的要求．其体外释放过程同时符合Higuchi方程和一级释药方程，R^2值均在0．995以上。     

A New Pathway to Synthesize Cyclomercurated Ferrocenylimines Containing Heterocyclic Ring

The cyclomercurated ferrocenylimines containing heterocyclic ring were prepared by the condensation of cyclomercuration of acylferrocene with the appropriate heterocyclic amine.This procedure provides an efficient method for the synthesis of cyclomerucurated ferrocenylimines containing heterocyclic ring which are difficultly synthesized by the conventional method.The reaction mechanism is proposed.     

SYNTHESIS OF MACROPOROUS COPOLYMER OF VCA AND DVB

The reactivity ratios of vinyl acetate(VAc) and divinyl benzene (DVB) were calculated from the Q and e values.The possibility of the copolymerization of these two monomers was predicted and the copolymerization was carried out by suspension polymerization technique in the presence of pore producing agent (toluene and gasoine).The relative ratio of acetoxy group and benzene ring in the copolymer were monitored by IR measurement during the polymerization.The variation of pore properties,such as spectific surface area,porosity and average pore diameter,with polymerization time were determined.The copolymers at various polymerization time were alcoholyzed and thus the variation of the hydroxyl group content with polymerization time was studied.     

不同羧酯化的聚马来酸十八醇酯齐聚物的镉盐LB膜成膜特…

由聚马来酸酐和十八醇合成了一系列不同羧酯比的聚马来酸十八醇酯，并以其为成膜材料，ＣｄＣｌ２水溶液为亚相制备了一系列聚马来酸十八醇酯镉盐ＬＢ膜，借助小角Ｘ射线衍射和红外吸收光谱表征了成膜条件及羧酯比对ＣｄＰＭＡ膜有序结构的影响。在较高膜压和快速提拉条件下，低羧酯比的ＣｄＰＭＡ可得到有序性很高的Ｙ－型ＬＢ多层膜；高羧酯比的ＣｄＰＭＡ得不到高有序性的ＬＢ多层膜。     

世界级新型表面活性剂—烷基糖苷

世界级新型表面活性剂──烷基糖苷随着人们对环境质量要求的不断提高，一种新型的化工产品除了要有良好的性能和经济效益外，还须满足环境相容性的要求。近年来开发的烷基糖苷（ＡｌｋｙｌＰｏｌｙｇｌｙｃｏｓｉｄｅ，缩写ＡＰＧ）以无毒，对皮肤刺激小或无，生物降解迅...     

α-卤代萘与叔己酮碳负离子在Co(Ⅱ)络合物催化下的自由基链式亲核取代反应产物的薄层色谱定量分析

研究了以Co(Ⅱ)络合物为催化剂,α-卤代萘与叔己酮碳负离子的自由基链式亲核取代反应(SRN1)产物α-萘基叔己酮的薄层色谱扫描定量分析方法;定量分析的线性范围为0～4.4μg,平均回收率99%～101%,异板间相对标准偏差为2.3%,同板相对标准偏差为1.6%.     

SiCp/Y112铝基复合材料制备工艺及性能

3种不同铸造工艺条件下铝基复合材料的微观组织,并对其硬度进行了测定.研究表明:与全液态铸造法和半固态铸造法相比,搅熔铸造制备的SiCp/Y112铝基复合材料,其增强相SiC颗粒分布均匀,气孔率较少.是一种较理想的金属基复合材料制备工艺.未增强的Y112基体铝合金的维氏硬度高于其半固态坯料的维氏硬度;而SiCp/Y112铝基复合材料的维氏硬度明显高于基体的维氏硬度,并随着SiC颗粒的体积分数的增加其复合材料的维氏硬度不断提高.