An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

广州菲罗门科学仪器有限公司

广州菲罗门科学仪器有限公司专门为全国的色谱分析用户提供色谱柱和色谱零配件服务，我们是美国phenomenex公司的中国总代理，我们秉承最高品质的产品，最合理的价位和最积极的态度服务客户的理念，服务于所有的色谱分析用户，愿我们成为您色谱分析中值得信赖的伙伴。[第一段]     

原位合成分子筛膜毛细管色谱柱的研制

吸附型多孔层毛细管柱既耐高温又对气体及烃类异构体有选择性，同时又具有毛细管色谱快速、高效等优点，是解决难分离组分的重要柱型．常用作气一固吸附色谱固定相的有强极性的硅、中极性的氧化铝、非极性的碳质及特殊吸附作用的分子筛．其中分子筛以其独特的吸附作用，在永久性气体和烃类碳数族组成分析中有重要地位．Pruecell和Soulages[1，2]等制备了涂渍型5A和13X型分子筛的毛细管柱，对低碳烃类化合物显示了良好的分离能力，分析柱温较填充柱降低约100℃．邹乃忠等[3～5]也先后制备了分子筛层的毛细管柱用来作直馏汽油的分析．由于通…     

柱前衍生-高效液相色谱法测定钢及合金中钨和钼

以tiron作为柱前衍生试剂,用含3mmol·L-1pH 3.8的HOAc-NaOAc,40mmol·L-1TBA-Br和2mmol·L-1tiron的甲醇-水溶液(53+47)作流动相,在C18柱上,于15min内实现了WO42-、MoO42-的分离测定。钨和钼的检出限分别为5.98和3.20ng·ml-1。方法快速,选择性好,用于钢及合金中高含量钨和钼的测定,结果与标准值相符。     

不分流进样/Cu~(2 )预柱-毛细柱GC/FTIR鉴定环境水中痕量有机污染物

本文介绍一种新的分离分析技术,即不分流进样/Cu~(2 )预柱-毛细柱GC/FTIR,它能彻底消除溶剂影响,实现大容量进样,系统灵敏度比现行GC/FTIR系统高约1～2个数量级。这种技术已成功地用于长江水中痕量有机污染物的分析。     

铁铝复合柱撑粘土的制备、柱结构和稳定性(I)

用两种方法合成了一系列不同Fe/Al比的铁铝复合柱撑牯土(FeAl-PlLC). 用~(27)Al-NMR、UV、ESR等手段考察了柱溶液的结构和状态, 用XRD、DTA、UV-DRS 等技术对其结构、稳定性进行了研究. 结果表明, 铁铝柱撑粘土的底面间距为1.98～1.55 nm, Fe/Al比对其柱结构、比表面积、热稳定性均有较大影响. Fe/Al<0.5时, 层间柱主要呈现Keggin结构, Fe/Al≥0.5时, 可能为三聚结构. 随Fc/Al比的增加, d(001)值, 比表面面、热稳定性逐渐下降.     

入口节流微通道换热器内相变传热特性

设计加工一种带有入口节流结构的铜基微通道换热器,理论分析其传热模型、实验测量微通道换热器内相变换热的传热特性和压力特性。结果表明:换热器内部的热传递过程为其主要换热模式;换热器表面温度随加热热流密度的增大而增大;微通道入口流速对表面温度影响较小;入口工质过冷度线性影响换热器的表面温度。热流密度在不同阶段对换热系数有不同影响,热流密度为360 W/cm~2时,换热器换热系数出现最大值;换热器压降随热流密度和系统流速的增加而增大。