N8H8链状异构体结构与稳定性的理论研究

采用密度泛函理论(DFT), 在B3LYP/6-311＋＋G(d,p)基组上计算得到了21种N₈H₈链状异构体, 并研究了这些异构体间可能的互变异构情况. 为了得到更为精确的能量信息, 计算了QCISD(T)/6-311G(d,p)基组水平上各物质的能量. 所得的21种异构体分为4类(4种类型链状化合物): A为直链, B有一个支链, C有2个支链, D有3个支链; D类只有一种, A类稳定构型2种, B类稳定构型12种, C类稳定构型6种; 相对稳定的分别为: B2-1构型, B2-3构型和C23-2构型. 我们研究发现N₈H₈链状异构体中含有明显N＝N双键特征有利于化合物稳定性的提高.     

吡咯及二氢吡咯类化合物的合成研究进展

吡咯衍生物单体是一类重要的五元氮杂环化合物, 用途非常广泛. 根据母环氧化状态的不同, 吡咯衍生物单体可分为吡咯、二氢吡咯以及四氢吡咯等三类化合物. 综述了它们的合成方法及其合成研究进展情况.     

油溶和水溶性羰基引发剂的光化学

本文回顾了在羰基引发剂的作用下烯烃单体光引发聚合的最新机理。报道了有关多种当前通用的新型羰基引发剂的光物理和光化学的近期工作,其中包括 UV 吸收,发光光谱和闪光光解的研究。还报道了油溶性引发剂对丙烯酸丁酯的光聚合效应。证明油溶性引发剂实质上是经过三重态来起作用,其中包含一个从溶剂中攫取氢的引发步骤。对于硫杂蒽酮衍生物来说,它们从叔胺接受电子的能力及其光聚合效应之间有一定的关系。从闪光光解获得的证据说明在这种情况下存在着自由基阴离子,但是基于二苯酮和苯基酮的引发剂则没有。预料后者直接从胺攫氢是通过三重态羰基或是引发剂的自由基。有证据表明联苯甲酰主要是通过光裂解来起作用。水溶性硫杂蒽酮引发剂的作用主要是经过单重态,其中包含引发时攫氢一步。在这种情况下,自由基的形成不受氧的影响。     

树状催化剂在不对称氢转移反应中的回收循环使用研究

以(1S,2R)-降麻黄碱为核心的第三代手性树状催化剂在对苯乙酮的不对称氢转移反应中可以方便的回收并循环使用. 该树状催化剂可以一共使用3次而保持对映选择性基本不变.     

镍电极开路电位测定微量硼氢根离子

实验采用循环伏安法，用镍电极代替铂铑等贵金属电极测定了碱性体系中不同硼氢根离子浓度下的开路电位，得出了研究电极的开路电位（-0．355～-0．280vs.SCE／V）与微量硼氢根离子浓度的对应关系，并用于监测电解偏硼酸钠制备硼氢化钠体系中微量硼氢根离子，同时计算了该方法的误差。结果表明，测量结果的相对标准偏差为2．2％；回收率为98．4％。该法简单、快速，可测定10^-5～10^-3mol／L范围的硼氢根离子浓度。     

锆助剂对低温液相合成甲醇用铜铬硅催化剂性能的影响

考察了含锆的铜铬硅催化剂低温液相合成甲醇性能，并进行了BET、TPR-H2、TPD-H2、TPD-CO、XRD和XPS表征。结果表明，锆作为结构助剂及电子助剂对催化剂在低温液相合成甲醇反应中具有显著的促进作用，反应活性可提高32.25 ％。锆助剂能有效提高催化剂的比表面积，促进催化剂中铜铬组分的分散及表面富集。ZrO2加入在催化剂表面产生的Cu+与催化活性的改善密切相关，Zr4+、Cr3+、Cu+可形成复合中心，为价态的稳定性提供微环境，在H2活化及C O键的断裂等反应步骤中起重要作用。     

双功能型嵌入镍纳米颗粒的碳棱柱状微米棒电极用于电化学甲醇氧化助力的节能产氢

With the rapid development of human society, clean energy forms are imperative to sustain the normal operations of various mechanical and electrical facilities under a cozy environment. Hydrogen is considered among the most promising clean energy sources for the future. Recently, electrochemical water splitting has been considered as one of the most efficient approaches to harvest hydrogen energy, which generates only non-pollutant water on combustion. However, the sluggish anodic oxygen evolution reaction significantly restricts the efficiency of water splitting and requires a relatively high cell voltage to drive the electrolysis. Therefore, seeking a thermodynamically favorable anodic reaction to replace the sluggish oxygen evolution reaction by utilizing highly active bifunctional electrocatalysts for the anodic reaction and hydrogen evolution are crucial for achieving energy-efficient hydrogen production for industrial applications. Nevertheless, it is known that the oxygen evolution reaction can be replaced with other useful and thermodynamically favorable reactions to reduce the electrolysis voltage for realizing energy-efficient hydrogen production. Therefore, in this study, we present a bifunctional nickel nanoparticle-embedded carbon (Ni@C) prism-like microrod electrocatalyst synthesized via a two-step method involving the synthesis of a precursor metal-organic framework-74 and subsequent carbonization treatment for methanol oxidation and hydrogen evolution. The interfacial structure consisting of a nickel and carbon skeleton was realized via in situ carbonization. However, the dispersed nickel nanoparticles do not easily aggregate owing to the partition by the surrounding carbon as it would sufficiently expose the active Ni sites to the electrolytes, ensuring fast charge transfer between the catalyst and electrolytes by accelerating the electrochemical kinetics. In the anodic methanol oxidation, the products were detected as carbon dioxide and formate with faradaic efficiencies of 36.2% and 62.5%, respectively, at an applied potential of 1.55 V. Meanwhile, the Ni@C microrod catalyst demonstrated high activity and durability (2.7% current decay after 12 h of continuous operation) toward methanol oxidation, which demonstrates that methanol oxidation precedes oxidation under voltage forces. Notably, the bifunctional catalyst not only exhibits excellent performance toward methanol oxidation but also yields a low overpotential of 155 mV to drive 10 mA∙cm⁻² toward hydrogen evolution in 1.0 mol∙L⁻¹ KOH aqueous solution with 0.5 mol∙L⁻¹ methanol at room temperature, which guarantees the hydrogen production efficiency. More importantly, the constructed two-electrode electrolyzer produced a current density of 10 mA∙cm⁻² at a low cell voltage of 1.6 V, which decreased by 240 mV after replacing the oxygen evolution reaction with methanol oxidation.     

Chemoselective Dehydrogenation of 3-[2-（3,4-Dihydro-1-naphthalenyl）ethyl]imidazolidine-2,4-diones： a New and Convenient Synthesis of 13,16-Diazaequilenin analogs

The synthesis of the title compounds starting with the chemoselective dehydrogenation of 3-[2-(3,4-dihydro-1-naphthalenyl)ethyl]imidazolidine-2,4-diones has been described.     

Synthesis and Crystal Structure of 1,7,7-Trimethyl- 4-（4-methoxyphenyl）-4,6,7,8-tetrahydroquinoline- 2,5（1H,3H）-diones under Microwave Irradiation

1 INTRODUCTION Various quinolone derivatives are known to dis- play interesting biological properties ranging from microbial activity to cytotoxicity[1]. They have been reported as antiviral (HIV-1)[2] and antitumor agents[3] as well as used as tubulin[4], topoisomerase[5] and thrombocyte inhibitors[6]. As a member of the quino- lone family, substituted N-phenyl-2-quinolones re-present the structural basis of many biologically active compounds, such as protein kinase inhibitors, immunodu…     

Theoretical Studies on the Abstraction Reaction of Atomic O（^3p） with Si2H6

The hydrogen abstraction reaction of O(^3P) with Si2H6 has been studied theoretially. Two transition states of ^3A″ and ^3A′ symmetries have been located for this abstraction reaction. Geometries have been optimized at the UMP2 leve with 6-311G (d) basis set. G3MP2 has been used for the final single-point energy calculation. The rate constants have been calculated over a wide temperature range of 200-3000K using canonical variational transition-state sheory (CVT) with small curvature tunneling effect(SCT). The calculated CVT/SCT rate constants match well with the experimental value.