Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

压电陶瓷压电特性的激光调制法测量研究

介绍可测量压电陶瓷压电特性的激光干涉调制测量方法.采用相干检测原理对信号进行提取,不仅可以抑制噪声对干涉信号的影响,而且还可以大大降低光电探测器和电路的1/f噪声.与通常干涉仪测量方法相比,这种方法具有测量灵敏度高等优点.利用该方法对压电陶瓷压电特性进行了测量,讨论了激励电压信号的频率、幅度对压电陶瓷压电常数d₃₁的影响,并对其压电迟滞曲线进行了测量.     

无电极电光电场传感器灵敏度提高的研究

从提高灵敏度角度出发,理论上分析了无电极电光电场传感器电极长度与灵敏度和带宽的关系.通过比较不同结构的传输函数,验证平衡检测方式的可行性,最后选取使用平衡检测的三端口结构作为实验器件结构,从而为器件制作的可行性方案从理论上作了验证.     

高灵敏度X光探测系统

对高灵敏度X光探测系统结构和灵敏度进行了阐述，给出了厚度差为0．1mm的铜台阶在低照射量下的透视图像及处理结果，证明了系统具有高的灵敏度。     

不确定广义系统的仿射二次稳定

本文讨论了具有仿射型不确定性的广义系统稳定问题，给出了不确定广义系统的仿射二次稳定定义及仿射二次H∞性能指标定义，利用线性矩阵不等式给出了不确定广义系统的仿射二次稳定的充分条件和系统具有仿射二次H∞性能指标的充分条件。     

强光光学元件波前检测算法

针对强光光学元件高精度检测中使用的两个新参数一——波前位相梯度和功率谱密度的数值计算方法进行了研究，并对目前使用的大口径干涉仪传递函数进行了实验标定。     

应用无衍射贝塞尔光束的固体线膨胀系数测量系统

测量固体线膨胀系数是工程设计中的一项重要工作。这套非接触固体线膨胀系数测量系统利用激光三角法进行了设计。通过采用线阵CCD作为信号传感器来实现自动化测量。通过采用无衍射贝塞尔光束来提高测量精度和增大测量范围。     

流动注射原子吸收光谱法测定富硒天麻、葡萄及大米中的硒

建立了流动注射氢化物发生-原子吸收光谱法测定富硒天麻、葡萄及大米中硒的方法。测定硒的线性范围为0．33μg/L-50μg/L，相对标准偏差小于3％，加标回收率为93％-106％。方法已广泛应用于实际样品中微量硒的测定。