RATE OF INTRA-MOLECULAR CONTACT FORMATION IN SHORT TWO-DIMENSIONAL COMPACT POLYMERS CHAINS

It is important to know the rate of intra-molecular contact formation in proteins in order to understand how proteins fold clearly. Here we investigate the rate of intra-molecular contact formation in short two-dimensional compact polymer chains by calculating the probability distribution p(r) of end-to-end distance r using the enumeration calculation method and HP model on two-dimensional square lattice. The probability distribution of end-to-end distance p(r) of short two-dimensional compact polymers chains may consist of two parts, i.e. p(r) = p1(r) p2(r), where p1(r) and p2(r) are different for small r. The rate of contact formation decreases monotonically with the number of bonds N, and the rate approximately conforms to the scaling relation of k(N) ∝ N-α. Here the value of α increases with the contact radius a and it also depends on the percentage of H (hydrophobic) residues in the sequences of compact chains and the energy parameters of εHH, εHP and εPP . Some comparisons of theoretical predictions with experimental results are also made. This investigation may help us to understand the protein folding.     

职业性铅接触对行为功能的影响

对３５名铅作业工城套的行为功能测验，接触组与对照组比较，１６项行为功能测验中有１４项得分有统计学意义（Ｐ〈０．０１或Ｐ〈０．０５），半数项目行为功能测验得分有随着铅作业工人龄增长而呈该增或该减的趋势。作者认为铅对作业工人行为功能的影响是肯定的，用行为功能测验的方法来研究铅的神经毒性是可取的简便方法。     

职业性铅接触对血压影响的研究

对１１８名铅接触工人及１０８名对照组工人的血压研究发现，在血铅为４４．２６μｇ／ｄＬ时，铅接触工人的收缩压显著高于对照组，分组研究发现，收缩压在级组剂量－反应关系趋势，在血铅３０．２０μｇ／ｄＬ，收缩压显著高于对照组，多元逐步回归分析发现，在控制一些其他影响血压的因素后，铅接触工人的血铅水平与收缩压和舒张压均有剂量－反应关系。     

半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜制备与检测

稳定的欧姆接触对半导体器件的正常工作起到至关重要的作用.目前市场上主要采用金/金锗镍合金作为n型GaAs的电极材料,工艺复杂,成本高昂.本文研究了一种新型的、廉价的适用于半绝缘GaAs的欧姆接触电极材料Ag/Co掺杂的非晶碳膜及其制备过程,以便于读者对半导体器件的制备工艺和流程有所了解.     

非刚性圆盘颗粒不连续变形分析

将颗粒当作可变形的圆盘,利用最小势能原理推导了圆形颗粒系统的初始应力矩阵、惯性力子矩阵。用精确的位移公式修正了原一阶近似位移公式。编写了非刚性圆盘颗粒的不连续变形分析(DDA)程序,并以圆球在斜面上光滑下滑和有摩擦下滑的算例验证了程序的正确性。     

MODELING CONTACTS OF IONIC POLYMER METAL COMPOSITES BASED TACTILE SENSORS

We report the first attempt to model the contacts of an ionic polymer metal composite（IPMC） based tactile sensor. The tactile sensor comprises an IPMC actuator, an IPMC sensor and the target to be detected. The system makes use of multiple contacts to work： the actuator comes into contact with the sensor and pushes the movement of sensor; the contact between the sensor and the object detects the existence and the stiffness of the target. We integrate modeling of various physical processes involved in IPMC devices to form a simulation scheme. An iteration and optimization strategy is also described to correlate the experimental and simulation results of an IPMC bending actuator to identify the two key parameters used in electromechanical transduction. Modeling the multiple contacts will aid the design and optimization of such IPMC based soft robotics.     

GC-MS法快速测定食品接触材料油墨中16种多环芳烃

以正己烷超声提取,弗罗里硅土固相萃取柱净化,以正己烷-二氯甲烷溶液(体积比1:1)洗脱,用GC-MS联用仪SIM模式外标法定量测定食品接触材料油墨中16种多环芳烃.在优化条件下,16种多环芳烃的浓度在0.1～4.0 μg/mL范围内与色谱峰面积呈良好的线性关系,线性相关系数大于0.995,检出限为0.12～3.24 ng/L.加标回收率为77.24％～ 104.76％,测定结果的相对标准偏差为1.05％～1.69％(n=6).该方法适用于食品接触材料油墨中PAHs的日常检测.     

Ion Pairing Kinetics Does not Necessarily Follow the Eigen-Tamm Mechanism

The most recognized and employed model of the solvation equilibration in the ionic solutions was proposed by Eigen and Tamm, in which there are four major states for an ion pair in the solution： the completely solvated state, 2SIP （double solvent separate ion pair）, SIP （single solvent separate ion pair）, and CIP （contact ion pair）. Eigen and Tamm suggested that the transition from SIP to CIP is always the slowest step during the whole pairing process, due to a high free energy barrier between these two states. We carried out a series of potential of mean force calculations to study the pairing free energy profiles of two sets of model mono- atomic 1：1 ion pairs 2.0：x and x：2.0. For 2.0：x pairs the free energy barrier between the SIP and CIP states is largely reduced due to the salvation shell water structure. For these pairs the SIP to CIP transition is thus not the slowest step in the ion pair formation course. This is a deviation from the Eigen-Tamm model.     

荧光增白剂28的光漂白特性研究

荧光增白剂28(F-28)为欧盟标准EN 648-2006《与食品接触的纸和纸板-荧光增白剂牢度的测定》中判断食品接触材料所含荧光增白剂是否向食品中迁移的标样。我们发现,在规定的波长365nm紫外光激发下,F-28所制成的标样会出现光漂白现象。因此,本文对F-28的光漂白特性进行研究。结果表明,紫外辐照时间为60s时,四级(3mg/L)、三级(8mg/L)、二级(31mg/L)、一级(125mg/L)滤纸和玻纤的最大荧光值衰减率分别为0.16%、0.29%、0.92%、0.44%和2.59%、1.99%、0.49%、3.14%;当辐照时间延长到1800 s时,最大荧光值衰减率分别增加为4.67%、4.22%、5.51%、2.75%和35.37%、39.78%、28.09%、39.38%。因此,在对食品接触材料是否含有荧光增白剂以及是否迁移的测试中,必须考虑光漂白因素。同时,滤纸作为迁移实验载体,在降低光漂白和稳定性方面比玻纤更具优势。     

同位素稀释-气相色谱-质谱法测定食品接触纸制品中3-氯-1,2-丙二醇和1,3-二氯-2-丙醇的迁移量

建立了同位素稀释-气相色谱-质谱法（GC-MS）同时测定食品接触纸制品中3-氯-1,2-丙二醇（3-MCPD）和1,3-二氯-2-丙醇（1,3-DCP）迁移量的方法。以4%（体积分数,下同）乙酸溶液、10%（体积分数,下同）乙醇溶液、50%（体积分数,下同）乙醇溶液和橄榄油为食品模拟物,根据GB 5009.156-2016和GB 31604.1-2015对样品进行迁移试验。称取迁移后的样品溶液10.00 g,经5 mL异辛烷（4%乙酸溶液、10%乙醇溶液、50%乙醇溶液）或2 mL甲醇（橄榄油）萃取,离心,氮吹至近干后,再加入含100μg·L^-1 3-MCPD-d₅和1,3-DCP-d₅的内标溶液1.0 mL,得到样品浓缩液。用气密针向样品浓缩液中加入20μL衍生试剂[含1%（质量分数）三甲基氯硅烷的N,O-双（三甲基硅烷基）三氟乙酰胺溶液],于80℃衍生60 min。采用GC-MS分析,内标法定量。结果显示：3-MCPD、1,3-DCP标准曲线的线性范围均为5～100μg·L^-1,检出限（3s）均...