Effect of Sulfate on an Iron Manganese Catalyst for Fischer-Tropsch Synthesis

The effect of sulfate on Fischer-Tropsch synthesis performance was investigated in a slurry- phase continuously stirred tank reactor(CSTR)over a Fe-Mn catalyst.The physiochemical properties of the catalyst impregnated with different levels of sulfate were characterized by N_2 physisorption,X-ray photoelectron spectroscopy(XPS),H_2(or CO)temperature-programmed reduction(TPR),Mφssbauer spectroscopy,and CO_2 temperature-programmed desorption(TPD).The characterization results indicated that the impregnated sulfate slightly decreased the BET surface area and pore volume of the catalyst, suppressed the catalyst reduction and carburization in CO and syngas,and decreased the catalyst surface basicity.At the same time,the addition of small amounts of sulfate improved the activities of Fischer- Tropseh synthesis(FTS)and water gas shift(WGS),shifted the product to light hydrocarbons(C_1-C_(11)) and suppressed the formation of heavy products(C_(12 )).Addition of SO_4~(2-)to the catalyst improved the FTS activity at a sulfur loading of 0.05-0.80 g per 100 g Fe,and S-05 catalyst gave the highest CO conversion(62.3%),and beyond this sulfur level the activity of the catalyst decreased.     

Ln2O3/Al2O3催化酯化合成邻苯二甲酸二辛酯

Ｌｎ_２Ｏ_３／Ａｌ_２Ｏ_３催化酯化合成邻苯二甲酸二辛酯陈其瑞，张凤美，罗明润，焦肇林（安徽师范大学化学系，芜湖２４１０００）关键词稀土氧化物，担载催化剂，催化酯化，邻苯二甲酸二辛酯邻苯二甲酸二（２－乙基己醇用酯（Ｄｉｏｃｔｙｌｐｈｔｈａｌａｔｅ）是一...     

高效液相色谱法测定大鼠血浆中的原儿茶酸

建立了大鼠血浆中原儿茶酸含量测定的高效液相色谱方法。采用的色谱柱为DiamondsilTM C18 柱(150 mm×4.6 mm,5 μm);流动相为乙腈-水(体积比为9∶91,用H3PO4 调pH至2.5);流速1.2 mL/min;检测波长260 nm;内标为对羟基苯甲酸。原儿茶酸的线性范围为0.050~3.20 mg/L,线性相关系数为0.9978，最低定量限为0.050 mg/L,日内和日间测定的精密度（以相对标准偏差表示）均低于7.0%,准确度（以相对误差表示）为-1.4%～2.6%；在0.050,0.40,3.20 mg/L低、中、高3个添加浓度水平下，血浆样品的提取回收率分别为83.4%,87.3%,91.1%。该方法简便,灵敏,准确,适用于大鼠体内原儿茶酸的药物动力学研究。     

可调移动重叠分离图法用于高效液相色谱多台阶梯度分离条件优化的研究

计算机辅助高效液相色谱（HPLC）分离条件优化可以低成本、快速地得到优化的分离条,因而已较为广泛地用于复杂样品的分离分析。基于移动重叠分离图方法,又发展了一种新型的多台阶梯度分离条件的优化方法可调移动重叠分离图法。该方法通过预测不同流动相条件下各组分的保留时间、峰宽和分离度,绘制出对于样品中各组分的重叠分离区域图。在对当前台阶流动相组成进行优化的同时,考虑其对后面一到两个台阶上流出组分保留的影响,实时地重新绘制对于后面台阶上流出组分的重叠分离区域图。通过观察当前台阶流动相条件对当前台阶和后面台阶上流出组分分离的影响,综合考虑样品中所有组分的分离情况,找到更接近全局最优的分离条件。通过扫描的方法对优化得到的分离条件进行微调,能够进一步提高分离效果。采用文献数据对可调移动重叠分离图法的应用加以说明,在二元流动相体系下,证明了该方法在HPLC方法建立方面的优越性。     

An Integrated Theory of Adsorption and Partition Mechanism and Eash Contribution to Solute Retention in Reversed Phase Liquid Chromatography

With the combination of the the stoichiometric displacement model for retention (SDM-R) in reversed phase liquid chromatography (RPLC) and the stoichiometric displacement model for adsorption (SDM-A) in physical chemistry,the total number of moles of the re-solvated methanol of stationary phase side.nr,and that of solute side in the mobile phase,q,corresponding the one mole of the desorbing solute,were separately determined and referred as the characterization parameters of the contributions of the adsorption mechanism and partition mechanism to the solute retention,respectively.A chromatographic system of insulin,using mobile phase consisting of the pseudo-homologue of alcohols(methanol,ethanol and 2-propanol)-water and trifluoroacetic acid was employed.The maximum number of the methanol layers on the stationary phase surface was found to be 10.6,only 3 of which being valid in usual RPLC,traditionally referred as a volume process in partition mechanism.However,it still follows the SDM-R.Both of q and nr of insulin were found not to be zero,indicating that the retention mechanism of insulin is a mixed mode of partition mechanism and adsorption mechanism.When methanol is used as the organic modifier,the ratio of q/nr was 1.13,indicating the contribution to insulin retention due to partition mechanism being a bit greater than that due to adsorption mechanism.A linear relationship between q,or nr and the carbon number of the pseudo-homologue in the mobile phase was also found.As a methodology for investigating the retention mechanism retention and behavior of biopolymers.a homologue of organic solvents as the organic modifier in mobile phase has also been explored.     

聚合物支载合成杂环化合物的研究进展

聚合物支载的反应与传统的经典液相反应相比，具有独特的优点，广泛应用于 杂环化合物的合成。综述了近年来杂环化合物的固相和液相合成研究。     

茉莉醛相转移催化合成法的改良

茉莉醛又称2-戊基肉桂醛,具有优雅的茉莉花香,是一种深受调香师喜爱的合成香料。目前已广泛应用于各种日用化学品中。     

负载锰卟啉催化乙酰胆固醇的选择性环氧化

多相金属卟啉催化剂已经被用于普通烯烃的环氧化,如表面修饰的多孔分子筛(MCM 41)[1 3],本文制备了高分子负载型锰卟啉用作胆固醇的非对映选择性环氧化催化剂。转化率可达100%,β选择性可达99%。1　实验部分乙酰胆固醇按文献[4]合成。溶剂均为AR级,按文献方法纯化。将Merrifield sPeptideresin(Aldrich,2%,交联度,200-400目,≈2mmolCl/g)加入到精制的DMF中,室温下放置24h,加入5-(对羟基苯基)-10,15,20-三(对甲基苯基)卟啉及无水K2CO3,N2保护下,80℃反应6h,洗涤干燥得到催化剂[1](图1)。催化环氧化反应　将PhIO及催化剂按化学计…     

硅胶固载化─（Lewis）酸催化剂的研究Ⅰ．硅胶固载化─四氯化钛复合物催化体系

以硅胶球为基质键合γ－ＧＯＰＳ并各接枝上具有络合功能的三种配体，邻位氨基吡啶、间酰氨基吡啶及对酰氨基吡啶，再和ＴｉＣｌ＿４络合成固载化的Ｌｅｗｉｓ酸催化剂，将这些催化剂进行缩醛、缩酮及酯化反应，有很好的催化活性，重复使用多次不失效．本文在合成此类催化剂的过程中利用热失重（ＴＧ）法及等离子光谱法（ＩＣＰ）等检测方法对合成此类催化剂的每一步进行跟踪检测，得到键合反应，开环反应及络合反应过程中的键合量，开环相量和ＴｉＣｌ＿４络合量的定量数据．对固载化催化剂表面的接枝量有所了解，从而可进一步检测此类催化剂的催化效应并得到一些启示．