新型罗丹明型荧光探针的合成及其对Cu(Ⅱ)的识别性能

罗丹明B-酰肼和8-羟基-7-喹啉醛经缩合反应合成了一个新型的荧光探针(L),其结构经1H NMR,MS和元素分析表征。考察了L对金属离子的识别性能,结果表明:在乙腈溶液[V(MeCN)∶V(H2O)=19∶1,pH7.0]中,L可高选择性的识别Cu(Ⅱ)。Cu(Ⅱ)能诱导L内酰胺结构开环并形成1∶2型的配合物L-Cu(Ⅱ),这一过程是可逆的。     

ICP-AES法测定牙膏中的铅、铜、锌

目的采用合适的样品前处理方法和电感耦合等离子原子发射光谱仪(ICP-AES)测定牙膏中铅、铜和锌。方法选择微波消解法、酸湿式消解法和干式消解法对样品进行前处理,对比这几种方法的结果。优化仪器测定参数以适应此类样品测定。测定方法的线性范围、相关系数、检出限、精密度、加标回收率等,探讨了相关结果的影响因素。并且与原子吸收比对。结果本法采用线性范围为0～2.000 mg/L,样品测定6次,所有元素相对标准偏差小于2.56%,加标回收率在95.95%～104.53%之间。结论用ICP-AES同时测定牙膏铅、铜和锌3种元素,具有良好的准确度和精密度,灵敏度高、检出限低、线性范围宽、元素之间的干扰少,样品前处理采用微波消解法,是高效可行的方法。     

聚(2,5-苯并噁唑)的流变性能

用自制的3-氨基-4-羟基苯甲酸盐酸盐(ABBAH)在多聚磷酸(PPA)中合成聚(2,5-苯并噁唑)(ABPBO),利用衰减全反射红外光谱(ATR-IR)表征了其化学结构.分别用平板流变仪和毛细管流变仪对合成的ABPBO-PPA溶液进行动态和稳态流变测试.结果表明:ABPBO-PPA溶液的储能模量(G ')和损耗模量(G')均随频率升高而增大,且储能模量比损耗模量上升得更快;ABPBO-PPA溶液随温度升高趋于牛顿流体,随浓度升高非牛顿性更显著,ABPBO-PPA溶液表现出强烈的假塑性,并且不同温度下溶液的剪切黏度差值随剪切应力增大而减小.     

Tuning the solid-state emission of the analogous GFP chromophore by varying alkyl chains in the imidazolinone ring

New analogues of green fluorescent protein (GFP) chromophore mGFP-Cn (n = 1, 3, 5, 11) with alkyl chains of different lengths in the imidazolinone rings were synthesized and their crystal structures were determined. These GFP-like chromophores are all emissive in the solid state. And the solid-state emission quantum yields of increase by extending the lengths of alkyl chains, owing to the fact that the intermolecular pi-pi interactions are significantly weakened based on their crystal structures.     

Theoretical studies on selectivities in the Staudinger reaction of vicinal diimines and ketenes

The selectivities,including peri-,regio-,and diastereoselectivities,in the Staudinger reaction involving vicinal diimines and ketenes were investigated theoretically via the density functional theory(DFT) calculation.The results indicate that vicinal diimines prefer stepwise [2+2] cycloaddition rather than [2+4] cycloaddition to generate cis-4-imino-β-lactams.The diimines attack the less sterically hindered exo-side of ketenes to generate zwitterionic intermediates,which directly undergo a conrotatory ring closure to produce cis-4-imino-β-lactams whatever diimines with less or more bulky N-substituents.For unsymmetric vicinal ketoaldehyde-derived diimines,their ketimines attack the exo-side of ketenes and undergo a conrotatory ring closure to produce cis-4-aldimino-β-lactams due to less steric effect.The current theoretical studies provide very important information for in-depth understanding of the selective formation of mono-cis-β-lactams from vicinal diimines and ketenes.     

DFT/TDDFT investigation on bis-cyclometalated alkynylgold(III) complex: Comparison of absorption and emission properties

absorption and phosphorescent mechanism of three Au(III) complexes, Au(2,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au25FPh], Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(C6H5)2 [Au35FPh], and Au(3,5-F2C6H3-C^C^C)(C≡C-C6H4N(1H-indole)2 [Au35FID], are calculated and compared using density functional theory (DFT) and time-dependent DFT (TDDFT). The calculated results reveal that enlarging the center C^C^C ligand will result in the enhanced LMCT participation. This theoretical contribution allows design of new Au(Ⅲ) complexes with higher phosphorescence efficiency.     

白色荧光粉NaGd（MoO4）2:Dy3+,Eu3+的水热合成及发光性能

采用谷氨酸辅助水热法合成了八面体形NaGd(MoO4)2:Dy3+,Eu3+白色荧光粉.X射线衍射结果表明,合成的样品为四方晶系的NaGd(MoO4)2纯相.扫描电子显微镜照片显示所制备的粒子为八面体形,各边长约为2μm.荧光光谱结果表明,在NaGd(MoO4)2:4%Dy3+,yEu3+(y=0,0.5%,0.6%,0.7%,0.8%,0.9%,1.0%)样品中,随着Eu3+掺入量的增加,Dy3+的发射峰逐渐减弱,而Eu3+的发射峰逐渐增强,说明Dy3+-Eu3+之间存在能量传递.通过色坐标图可知,当Eu3+掺杂量y=0.9%时,荧光粉的色坐标(0.338,0.281)与标准的白光色坐标(0.33,0.33)接近,表明NaGd(MoO4)2:4%Dy3+,0.9%Eu3+是很好的近紫外光激发下的白色荧光粉.     

应用TG-FTIR技术研究黄土庙煤催化热解特性

用浸渍法制备过渡金属氧化物担载型催化剂MO_x/USY(M=Co、Mo、Co-Mo),用热重红外联用技术考察了MO_x/USY催化剂对黄土庙(HTM)煤热解失重特性和热解产物生成规律的影响。热重实验结果表明,MO_x/USY催化剂可使HTM煤热解的二次脱气条件更为温和,热解峰温分别提前14、23和9℃。动力学分析结果表明,MO_x/USY催化剂可降低HTM煤样热解的活化能。FT-IR研究表明,MO_x/USY催化剂可有效改善HTM煤热解产物的组成和分布,CoO_x/USY催化剂能显著提高HTM煤热解产物中高热值气体(CO、CH₄)和轻质芳烃以及脂肪烃类化合物的含量;MoO_x/USY催化剂没有明显改善HTM煤热解产物组成和分布;MoO_x-CoO_x/USY催化剂可促进CO、CH₄、轻质芳烃和脂肪烃类化合物的生成,却使热解产物的生成向高温区移动,说明USY负载的不同过渡金属氧化物对煤样热解行为和热解产物有较大影响。     

Cu-V-O氧化物催化燃烧甲苯的活性和抗硫性

采用溶胶-凝胶法制备一系列不同Cu/V比例的Cu-V-O催化剂,利用XRD、BET、H₂-TPR等手段对催化剂进行了表征,并考察其催化燃烧甲苯的活性和抗硫性。结果表明,适量的Cu掺杂会提高催化剂比表面积,而且Cu-V可以形成Cu₃V₂O₈晶型结构,使V₂O₅晶格氧活动增加,提高催化剂氧化-还原能力。其中,Cu_0.15V_0.85催化剂表现出最佳的活性和抗硫性;通过TiO₂负载可以进一步提高催化剂对甲苯的催化燃烧活性和抗硫性。     

氢氧化铯催化端炔氢硒化:高立体区域选择性合成(E)-1-芳硒基烯烃

在催化量氢氧化铯存在下,端炔与硒酚在N,N-二甲基甲酰胺(DMF)中、室温、氮气保护下,发生亲核加成反应,高收率、高立体选择性合成一系列(E)-1-芳硒基烯.反应机理为氢氧化铯与硒酚反应产生的芳硒化铯,随后对端炔进行亲核加成,形成的烯基负离子水解得到产物.这方法为不活泼端炔氢硒化提供了一条新的和简便途径.