Deposition of Hydrogen-Free Silicon Nitride Thin Films by Microwave ECR plasma Enhanced Magnetron Sputtering at Room Temperature

Hydrogen-free silicon nitride （SiNx） films were deposited at room temperature by microwave electron cyclotron resonance （MW-ECR） plasma enhanced unbalance magnetron sputtering system. Both Fourier-transform infrared spectroscopy and x-ray photoelectron spectroscopy are used to study the bonding type and the change of bonding structures of the silicon nitride films. The results indicate that the chemical structure and composition of SiNx films deposited by this technique depend strongly on the N2 flow rates, the stoichiometric SiNx film, which has the highest hardness of 22.9 GPa, could be obtained at lower N2 flow rate of 4 sccm.     

A Compact Magnetically Insulated Line Oscillator with New-Type Beam Dump

We present a compact improved model of the magnetically insulated line oscillator with new-type beam dump and other novel features. In the experiments, high-power microwave of the TM01 mode is generated from the device with a frequency range of 1.73-1.78 GHz and a peak power level of above 2 GW, when the diode voltage is taken in the range 520-540kV, and the diode current is in the range 58-62kA. This confirms the simulation results.     

A Generalization of the Mean Size Formula of Wavelet Packets in Lp

The purpose of this paper is to investigate the mean size formula of wavelet packets in Lp for 0 〈 p ≤ ∞. We generalize a mean size formula of wavelet packets given in terms of the p-norm joint spectral radius and we also give some asymptotic formulas for the Lp-norm or quasi-norm on the subdivision trees. All results will be given in the general setting,     

中物院发展数控技术的基本思路初探

本文通过对我院数控技术应用的现状分析，提出发展数控技术的基本思路。     

关于中值定理证明中辅助函数的构造

从分析方法入手，获得中值定理证明中的辅助函数。     

基于CAPPFramework的CAPP系统的开发与应用

在国家863CIMS目标产品CAPPFramework系统的基础上，研究了面向对象的信息建模技术、信息模型驱动的所见即所得工艺设计技术、工作流技术．并在此基础上进行集成化、智能化计算机辅助工艺设计(CAPP)的应用与开发，实现了工艺设计的自动化，基本达到了在信息集成基础上的工艺设计与工艺信息管理一体化的目的，对企业的CAPP实施具有一定的参考价值．     

一种微穿孔板消声器

本文根据马大猷教授提出的“微穿孔板吸声体精确理论”，在对微穿孔板消声器结构参数与吸声特性之间的相互影响进行了分析的基础上，设计了微穿孔板消声器并将其应用在新舟60飞机APU(辅助动力装置)降噪的实际工程中，并通过编写的噪音数据采集分析程序，对降噪效果进行了测试和分析，验证出微穿孔板消声器对消除飞机的APU的排气噪声具有良好的消声效果，平均降噪7．16dB。     

A New High Efficiency Multiwave Cerenkov Generator Operating at Low Magnetic Field

With a resonant cavity inserted between the second slow-wave-structure section and the tapered wavegulde, a new structure of the multlwave Cerenkov generator (MWCG) operating at low guiding magnetic field is proposed to produce high efficiency and high power microwave. Some features and potential advantages of the proposed device are analysed. The 2.5-dimensional partlcle-in-cell simulation is employed to verify the initial expectation.The results show that, with the use of an electron beam of 640keV and 8.4kA guided by the magnetic lield of 0.6 T, a stable and monochromatic X-band microwave output of 4 GW in peak power is achieved, and the average efficiency is over 30%.     

黑蝉(C. atrata Fabricius.)辅助发声器的动力学特性

本文给出了黑蝉辅助发声器的动力学特性,揭示了发音肌收缩运动的颤动特性。音盖、鼓盖和褶膜的每个振动周期都由与每个单音节的调幅脉冲列(AMPT_(1-3))相对应的子振动(SGV_(a-b,c))组成。与背部振动相比较,SGV_(a-c)具有调音功能的副频带。连续鸣叫时共鸣腔内的气压变化和两侧气门的气流速度分别约7.94—15.88Pa和0.59—0.84cm~3/s,腹部运动时分别增大约7倍和2.6倍。发音肌收缩到临界发声状态产生颤动,同时激励发声膜和调声板-膜产生AMPT_(1-3)和SGV_(a-c)。     

BEPCII直线加速器相控系统设计研究

为了补偿由于各种因素引起的微波相位漂移,BEPCII直线加速器需要建立微波相位反馈控制系统.能量最大法将用来确定每台功率源的最佳相位.沿直线加速器速调管长廊铺设相位稳定同轴线提供相位参考.现在已经完成了关键部件,如PAD单元、IfA 单元的开发.搭建了相控最小系统对系统进行了验证.