Self-assembly of Carboxyl Functionalized Polystyrene Nanospheres into Close-packed Monolayers via Chemical Adsorption

The polyacrylic acid functionalized polystyrene nanospheres were synthesized and self-assembled into irregular, densely packed monolayers in non-aqueous media. The polymer nanoparticles were chemically adhered to substrates. The morphologies of the resulting films were investigated. The impact of the volume fraction of alcohol in the mixed solvents on the particle adsorption and fabrication of nanosphere assembled films was examined.     

Fabrication of Zeolite A Rods with Irregular Macropores by Self-assembly of Zeolite A Microcrystals Using Microwave-assisted Hydrothermal Synthesis

Zeolite A rods by self-assembly of zeolite A microcrystal were successfully synthesized by microwave-assisted hydrotherrnal synthesis. The average size of zeolite crystals consisting of self-assembling materials was about 300 nm and the length of zeolite rods was in the range of 15--30μm.     

微全分析系统检测方法的研究进展

综述了不同类型的检测方法在微全分析系统的应用，并简述了各类型的检测方法的优缺点。引用文献92篇。     

β-环糊精固定相在色谱中的应用及发展趋势

β-环糊精(β-CD)对客体分子具有良好的手性识别性，广泛应用作色谱固定相等。本文按键载技术、包裹技术等分类介绍了β-CD类固定相近年来在色谱中的应用及发展趋势，并阐述了对手性识别机理的认识。     

微模塑法制备PMMA/SiO2二氧化硅杂化材料微结构

以摩尔比为 1∶1的甲基丙烯酸甲酯 (MMA)、甲基丙烯酸 (3 三乙氧基硅烷基 )丙酯 (ESMA)单体、0 .2 %(单体总量的质量分数 )的偶氮二异丁腈AIBN引发剂和四氢呋喃 (THF)溶剂 ,及 2 0 % (总质量分数 )的正硅酸乙酯TEOS合成出PMMA/SiO2 有机 无机杂化的杂化溶胶 .将溶胶在洗净的普通光学玻璃基片表面甩膜 .利用软刻蚀中的微模塑法 ,把有机硅弹性印章复制有精细图纹一面轻放在杂化溶胶膜上进行微模塑 ,外加 1N压力于12 0℃下处理 2h使溶胶凝胶化 .印章剥离后在基片表面就形成了PMMA/SiO2 有机 无机杂化材料的微图纹结构 .从微图纹的光学显微镜照片可以看出微模塑方法制备杂化材料复制的图纹精细度高 ,操作简单易行 ,是一类比较理想的微细图纹结构加工的方法 .     

保健酒中淫羊霍苷成分的分析研究

采用高效液相色谱法对某保健酒中淫羊藿苷成分进行分析研究,结果表明,保健酒中淫羊藿苷的平均含量为0.627％,平均回收率为98.1％,相对标准差（RSD）为2.1％.本分析方法也适用于其他保健酒、药材和药品中淫羊藿苷成分的分析测定.     

Ablation of GaN Using a Femtosecond Laser

We study the pulsed laser ablation of wurtzite gallium nitride(GaN) films grown on sapphire,using the femtosecond laser beam at a central wavelength of 800nm as the source for the high-speed ablation of GaN films.By measuring the backscattered Raman spectrum of ablated samples,the dependence of the ablation depth on laser fluence with one pulse was obtained.The threwshold laser fluence for the ablation of GaN films was determined to be about 0.25J/cm^2,Laser ablation depth increases with the increasing laser fluence until the amount of removed material is not further increased.The ablated surface was investigated by an optical surface interference profile meter.     

一类具有奇异系数的弱双曲型方程的解的可微性及渐近性

本文讨论如下形式的方程((?)/(?)~t-it~ρD_x)(?)/(?)~t+it~ρD_x+(α+β)/t~α)u+α/t~α-(?)/(?)~t+α(α+β)/t~(2α)u=f(t,x) (1)x∈R~n,00,α≥1的常数。α及β也是常数。方程在 t=O 有重特征。而低阶项的系数正好在 t=0 有奇异性。我们在方程的低阶项符合一定条件,且方程的特征根的重数与低阶项的奇异性的阶数满足一定关系时,给出了方程(1)的解的唯一性与可微性定理。并讨论了当 t→+0 时,解的渐近性态。     

裂解气相色谱质谱法研究增塑剂邻苯二甲酸二甲酯的热降解机理

用裂解气相色谱-质谱联用方法研究了橡胶产品中使用的增塑剂邻苯二甲酸二甲酯(DMP)在不同温度条件下的热裂解行为.对不同温度条件下裂解产物的分析表明,在初始阶段DMP的裂解产物主要为二氧化碳、苯、甲苯和苯甲酸甲酯.随着温度的升高苯甲酸甲酯进一步裂解成为分子质量更小的自由基,并发生稠环化反应形成更稳定的菲、蒽、间-联三苯、三亚苯等芳香族多环化合物.根据分析实验提供的裂解产物信息和有机物热裂解化学反应的原理对DMP的热裂解反应机理作了探讨,表明在废旧合成橡胶热裂解回收过程中,增塑剂DMP的高温裂解会产生多环芳烃污染物.应选择合适裂解工艺和裂解温度,以减少对环境的污染.