A 515-nm laser-pumped idler-resonant femtosecond BiB3O6 optical parametric oscillator

We report on an idler-resonant femtosecond optical parametrical oscillator(OPO)based on BiB₃O₆(BiBO)crystal,synchronously pumped by a frequency-doubled,mode-locked Yb:KGW laser at 515 nm.The idler wavelengths of OPO can be tuned from 1100 nm to 1540 nm.At a repetition rate of 75.5 MHz,the OPO generates as much as 400 mW of idler power with 3.1 W of pump power,the corresponding pulse duration is 80 fs,which is 1.04 times of Fourier transform-limited(FTL)pulse duration at 1305 nm.In addition,the OPO exhibits excellent beam quality with M²<1.8 at 1150 nm.To the best of our knowledge,this is the first idler-resonant femtosecond OPO pumped by 515 nm.     

多晶LaB6阴极的脉冲热发射特性

 采用多晶LaB₆材料制成平板二极管阴极，阳极采用钼材料，阴极采用热传导与热辐射加热，加热体为石墨。实验研究了不同阴极温度、不同真空度下的脉冲发射特性，并对热发射稳定性进行了分析。结果表明： 在动态真空系统中， 阴极发射面积为0.012 1 cm²， 工作真空度为2×10^-4 Pa， 阴极温度分别为1 600， 1 650和1 700 ℃，在脉冲宽度为40 ms、重复频率为107 Hz的条件下，最大脉冲发射电流密度分别为34.0，44.0和53.8 A/cm²; 2×10^-4，5×10^-4和2×10^-3 Pa压强下的发射能力没有明显的差异;脉冲宽度的变化不影响发射电流密度的变化。     

从单一多位交换~(119)Sn二维交换谱求取SnCl_6~(2-)水解体系的动态交换速率常数

本文对如何从单一二维交换谱提取速率常数进行了理论分析,提出了一种近似处理方法,即把较短混合时间τ_m内在二维平面上磁化强度传递看成是单向进行的,进而导出了二维交换谱中所有峰强随τ_m变化的表达式。所得结果与Ernst的精确结果在一级近似下完全一致,在二级近似下略有不同,但将难以求解的问题转化成简单的代数方程、用这一方法对新近获得的SnCl_4·5H_2O在水溶液中的~(119)Sn二维交换谱进行了处理,得到与实验相吻合的结果,并求得了SnCI_6~(2-)水解体系的动态交换速率常数。     

Synthesis and characterization of Sr3Al2O6：Eu2＋, Dy3＋ phosphors prepared by sol-gel-combustion processing

A type of red luminescent Sr3Al2O6:Eu2+, Dy3+ phosphor powder is synthesised by sol-gel-combustion processing, with metal nitrates used as the source of metal ions and citric acid as a chelating agent of metal ions. By tracing the formation process of the sol-gel, it is found that it is necessary to reduce the amount of NO3- by dropping ethanol into the solution for forming a stable and homogeneous sol-gel. Thermogravimetric and Differential Scanning Calorimeter Analysis, x-ray diffractionmeter, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the luminescent properties of the as-synthesised Sr3Al2O6:Eu2+, Dy3+. The results reveal that the Sr3Al2O6 crystallises completely when the combustion ash is sintered at 1250 C. The excitation and the emission spectra indicate that the excitation broadband lies mainly in a visible range and the phosphors emit a strong light at 618 nm under the excitation of 472 nm. The afterglow of (Sr0.94Eu0.03Dy0.03)3Al2O6 phosphors sintered at 1250 ℃ lasts for over 1000 s when the excited source is cut off.     

Mode field converter based on embedded photonic crystal fiber

Six high-index cores are embedded around the central solid core of the photonic crystal fiber to form a fiber embedded photonic crystal fiber （FEPCF）, which is investigated based on the beam propagation method. In this structure, the Gaussian mode could be transferred to the ring mode. So FEPCF could used as a mode convertor.     

Friction Properties of Bio-mimetic Nano-fibrillar Arrays

Nano-fibrillar arrays are fabricated using polystyrene materials. The average diameter of each fiber is about 300 nm. Experiments show that such a fibrillar surface possesses a relatively hydrophobie feature with a water contact angle of 142°. Nanoscale friction properties are mainly focused on. It is found that the friction force of polystyrene nano-fibrillar surfaces is obviously enhanced in contrast to polystyrene smooth surfaces. The apparent coefficient of friction increases with the applied load, but is independent of the scanning speed. An interesting observation is that the friction force increases almost linearly with the real contact area, which abides by the fundamental Bowden-Tabor law of nano-seale friction.     

Ag-TiO_2/KIT-6复合纳米光催化剂的研究

以有序介孔SiO2(简称KIT-6)为载体,采用钛酸丁酯水解法将纳米TiO2与KIT-6复合,并通过沉积沉淀法将纳米Ag粒子负载于其上,首次制得Ag-TiO2/KIT-6复合光催化剂,并采用相同的方法制备了一系列相关的催化剂.以光催化降解甲基橙来评价其催化性能,光催化活性顺序为Ag-TiO2/KIT-6＞Ag/TiO2＞TiO2/KIT-6＞TiO2＞Ag/KIT-6.利用XRD、N2物理吸附、XPS、UV-Vis DRS和TEM对系列催化剂进行表征,结果表明Ag-TiO2之间形成的异质结和催化剂的大比表面积是Ag-TiO2/KIT-6具有最高光催化活性的重要原因.其中Ag-TiO2之间的异质结结构,有效抑制了光生电子和光生空穴在TiO2表面和体相内部的复合,提高了光催化活性;此外Ag-TiO2/KIT-6的大比表面积大大提高了催化剂的吸附能力,增加了催化剂与污染物的接触,达到快速光催化降解污染物的目的.     

苯并18-冠-6配合物[K(B18-C-6)]SCN的合成与结构分析

苯并 18 -冠 - 6 (B18- C- 6 )与 K2 [Cd(SCN) 4 ]反应 ,得到了 [K(B18- C- 6 ) ]SCN配合物。通过元素分析、红外光谱、单晶 X射线衍射进行了结构分析。该配合物为单斜晶系 ,空间群 P2 (1) / c,晶体学数据 :a=0 .996 0(3) nm,b=2 .5 0 97(7) nm,c=0 .8374 (2 ) nm,β=10 6 .5 19(5 )°,V=2 .0 0 6 7(10 ) nm3 ,Z=4 ,F(0 0 0 ) =86 4,R1=0 .0 4 2 9,w R2 =0 .0 5 75。结构分析表明 ,该配合物由一个 [K(B18- C- 6 ) ]配阳离子和一个 SCN阴离子组成 ,配合物的两个分子通过 K+ - π相互作用形成一维链状结构     

多金属氧酸盐α-Na6H[GeW9Fe3(H2O)3O37]·16H2O的合成和光谱

合成了多金属氧酸盐α-Na6H[GeW9Fe3(H2O)3O37]16H2O，通过元素分析、红外、紫外、光电子能谱、极谱和穆斯堡尔谱等手段进行了表征，并讨论和研究了该配合物的谱学性质。     

碱蓝6B共振光散射法检测DNA

研究了碱蓝 6B与脱氧核糖核酸在酸性条件下共振光散射特征 ,考察了影响因素和最佳反应条件 ,建立了一种测定纳克级DNA的方法。在四硼酸钠 盐酸 (pH =2 90 )缓冲溶液中 ,线性范围为 10～ 10 0 4 μg·L- 1 ,相关系数为 0 9913,检出限为 4 2 μg·L- 1 ,用于合成样品的测定结果令人满意。