ADSORPTION OF 2,4-D ON MODIFIED HYPERCROSSLINKED POLYSTYRENE （NDA-99） AND XAD-4 RESIN

The adsorption behavior of pesticide 2,4-dichlorophenoxyacetic acid (2,4-D) in aqueous solution has been investigated using a hypercrosslinked polystyrene adsorbent (NDA-99) modified by dimethylamine group as well as a nonionic macroporous adsorbent (XAD-4). The Langmuir and Freundlich isotherm models were employed to fit the experimental data to describe adsorption mechanism. It shows that NDA-99 resin exhibits an adsorption affinity for 2,4-D higher than XAD-4 resin owing to its exceptional micropore structure and the amine group of the hypercrosslinked matrix.Further studies indicate that the hydrogen bonding interaction and the stronger π-π conjugation play a significant role in the course of the adsorption of 2,4-D on NDA-99 resin, which is in agreement with the IR spectroscopic results and the △E values of HOMO (the highest occupied molecular orbit) of adsorbent and LUMO (the lowest unoccupied molecular orbit) of adsorbate calculated from the MINDO/3 model.     

meso-苯基四苯并卟啉锌与芳腈在低温下的电子转移反应

研究了以meso-苯基四苯并卟啉锌作为电子给体,二腈基苯为电子受体分散在聚甲基丙烯酸甲酯中的光子选通光谱烧孔体系的特性.在20K用大功率和长时间的光子选通烧孔实验获得了反应产物的吸收光谱数据,为该体系通过光诱导电子转移反应机理提供了直接证据.     

脱铝超稳Y沸石的SiO2/Al2O3比与催化性能的研究

脱铝超稳Y沸石(简称DUSY)是八面沸石经脱铝改性后的固体酸催化材料,在石油化学工业和精细化学品合成中应用较广.我们曾报道了DUSY催化系列酯化反应,莰烯与乙酸的加成酯化反应[1],乙酸与β-苯乙醇的酯化反应[2],乙酸与烯丙醇的酯化反应[3],效果很好.克服了过去采用浓H2SO4作催化剂所带来的污染严重,设备腐蚀的问题,是具有应用前景的一类固体酸催化材料.谭志新等人曾报道α-蒎烯在固体超强酸上的异构化反应[4],王亚明等人报道了HMC-60催化α-蒎烯的异构化反应[5].与之相比较,用DUSY催化,其反应条件更温和.本文将DUSY的表面酸性与α-蒎烯异构反应相关联,探讨了硅铝比与催化性能的关系.     

高比表面积介孔网状氧化镁的制备、表征及对废水中Pb(Ⅱ)的吸附性能和机理

以天然水菱镁矿为原料，通过"煅烧-水化-煅烧"的简单方法制备了高比表面积介孔网状MgO，且实验过程中无须加入任何试剂。系统性研究了氧化镁用量、吸附时间、吸附温度及pH对氧化镁吸附模拟废水中铅离子吸附性能的影响，揭示了吸附机理，并考察了氧化镁对多种离子的吸附效果。结果表明：该氧化镁吸附剂具有188 m²·g^-1的高比表面积和0.85 cm³·g^-1的高孔体积，平均孔径为12.33 nm，其吸附动力学和等温线数据与伪二级模型和Langmuir模型高度吻合，表明重金属离子在氧化镁上为单层化学吸附。MgO介孔网状结构表现出对Pb（Ⅱ）的高吸附性能，最大吸附量为7 431.5 mg·g^-1，该数值远高于其他报道的基于MgO吸附剂的数值，铅去除率高达99.8%以上。介孔网状MgO的吸附机理主要是羟基官能团以及Mg（Ⅱ）与MgO表面重金属离子之间的离子交换所致。另外，该氧化镁可同时吸附多种离子，对Cd、Cr、Ni、As、Co、P、Se、Be、Bi、Cu、Fe、Mn、V、Zn、Al离子均具有优异的吸附性能。     

Preconcentration and Determination of Chromium Species Using Octadecyl Silica Membrane Disks and Flame Atomic Absorption Spectrometry

A novel and selective method for the fast determination of trace amounts of chromium species in water samples has been developed. The procedure is based on the selective formation of chromium diethyldithiocarbamate complexes at different pH in the presence of Mn(II) as an enhancement agent of chromium signals followed by elution with organic eluents and determination by atomic flame absorption spectrometry. The maximum capacity of the employed disks was found to be (396±3) µg and (376±2) µg for Cr(III) and Cr(VI), respectively. The detection limit of the proposed method is 49 and 43 ng·L^?1 for Cr(III) and Cr(VI), respectively. The proposed method was successfully applied for determination of chromium species Cr(III) and Cr(VI) in different water samples.     

载体和担载酸对乙烯直接氧化合成乙酸反应的影响

 在固定床流动反应器上研究了Pd－酸／载体体系催化乙烯直接氧\r\n化合成乙酸的反应，并对载体相同但担载酸强度不同的催化剂的催化活\r\n性进行了比较．结果表明，担载酸的强度明显影响催化剂的活性，酸强\r\n度越大其催化活性越高．用NH3－TPD和异丙醇脱水探针反应表征了二氧\r\n化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化剂的酸性，\r\n并测试了三种催化剂的催化活性．结果表明，载体通过影响担载酸的强\r\n度而影响催化剂的活性，载体上的强酸中心越多，催化剂的活性越高．\r\n测定了二氧化硅、活性碳和酸性白土三种载体担载的Pd－H4SiW12催化\r\n剂上Pd的分散度，并与其催化活性相关联．结果表明，决定乙烯直接氧\r\n化生成乙酸反应活性的主要因素是催化剂的酸强度而不是Pd的分散度．     

Synthesis and Characterization of Titanium-doped Ordered Mesoporous Alumina

Titanium-doped ordered mesoporous alumina with specific structural properties has been prepared by the evaporation induced self-assembly sol-gel method. The results show that the doped titanium helps to stabilize the ordered mesoporous alumina material without influencing the ordered mesoporosity. The textural properties of the obtained sample are related to the amount of doped titanium. When the molar ratio of aluminum to titanium(n(Al)/n(Ti)) is controlled as 10.2, the titanium-doped ordered mesoporous alumina exhibits high surface area(up to 218 m2 g-1), large pore volume(0.42 cm3 g-1) and narrow pore diameter(6.1 nm) after treating at 900 ℃, showing high thermal stability. Moreover, the obtained sample calcined at 900 ℃ still maintains ordered mesoporous structure and exhibits high thermal stability.     

富羧酸基团的共轭微孔聚合物:结构单元对孔隙和气体吸附性能的影响

Polar groups in the skeletons of conjugated microporous polymers (CMPs) play an important role in determining their porosity and gas sorption performance. Understanding the effect of the polar group on the properties of CMPs is essential for further advances in this field. To address this fundamental issue, we used benzene, the simplest aromatic system, as a monomer for the construction of two novel CMPs with multi-carboxylic acid groups in their skeletons (CMP-COOH@1 and CMP-COOH@2). We then explored the profound effect the amount of free carboxylic acid in each polymer had on their porosity, isosteric heat, gas adsorption, and gas selectivity. CMP-COOH@1 and CMP-COOH@2 showed Brunauer-Emmett-Teller (BET) surface areas of 835 and 765 m²·g^-1, respectively, displaying high potential for carbon dioxide storage applications. CMP-COOH@1 and CMP-COOH@2 exhibited CO₂ capture capabilities of 2.17 and 2.63 mmol·g^-1 (at 273 K and 1.05 × 10⁵ Pa), respectively, which were higher than those of their counterpart polymers, CMP-1 and CMP-2, which showed CO₂ capture capabilities of 1.66 and 2.28 mmol·g^-1, respectively. Our results revealed that increasing the number of carboxylic acid groups in polymers could improve their adsorption capacity and selectivity.     

“长触角”的和“夹馅”的C_(60)

介绍C60的几何结构和电子结构特点,在此基础上举例介绍制备C60衍生物的2类典型化学反应——加成反应和开孔反应,并结合反应实例简要介绍C60衍生物的应用前景。     

高比能高功率全石墨烯锂离子电容器

石墨烯由于拥有超高比表面积和超高电导率而被作为电化学电容器材料广泛研究.本文采用树脂为碳源，通过一种方便快捷的树脂交换法制备一种具有高比表面积的多级孔三维石墨烯（3DG）.经过此种方法的催化、造孔、热处理等主要工艺步骤后，可显著增加石墨烯材料的小、介孔数量，从而提高材料的电化学性能.通过BET测试表明，3DG的比表面积可达2400 m²/g，孔体积达到2.0 cm³/g.以3DG作为正负极材料制备高比能量高功率型锂离子电容器（3DG-LIC），可使3DG-LIC的工作电压从传统超级电容器的2.5 V扩展到4.0 V，能量密度也从20 Wh/kg提高到105 Wh/kg.另外，相同的化学和微观结构能很好地平衡正负极的容量及速率，使高比能量高功率的3DG-LIC具有更宽阔的应用领域.