互通多孔碳/二氧化锰纳米复合材料的原位水热合成及电化学性能

以互通多孔碳（IPC）为载体，水热条件下在碳表面原位反应生成纳米结构的二氧化锰（MnO₂），制备互通多孔碳/二氧化锰纳米（IPC/MnO₂）复合电极材料. 采用扫描电镜（SEM），透射电镜（TEM），X射线衍射（XRD），热重分析（TGA）对其结构进行表征；采用循环伏安法、恒流充放电和交流阻抗对其电化学性能进行研究. 结果表明：生成的MnO₂均匀地负载在碳的表面，形成多层次结构，并且随着温度的升高IPC表面负载的MnO₂由纳米颗粒变为纳米片状结构；MnO₂纳米片具有典型的K-Birnessite 型晶体结构；复合物中MnO₂的含量约为34%（w）. 在100 ℃制备的IPC/MnO₂复合材料在三电极系统中最高比电容达到了411 F·g^-1；随着反应温度的升高,比容量先增长后基本保持不变. 以IPC/MnO₂为正极，活性炭（AC）为负极，1 mol·L^-1 Na₂SO₄溶液为电解液组装成IPC/MnO₂//AC 混合超级电容器，发现IPC/MnO₂电极的电容器其电位窗口从1 V扩展到1.8 V，容量可达86F·g^-1，且表现出良好的电容特性和大电流放电性能.     

PREPARATION OF POLY（METHYL METHACRYLATE）/LAYERED DOUBLE HYDROXIDES NANOCOMPOSITES via in situ SOLUTION POLYMERIZATION

An exfoliated layered double hydroxides/poly(methyl methacrylate)(LDHs/PMMA)nanocomposite was prepared by in situ solution polymerization of methyl methacrylate(MMA)in the presence of 4-vinylbenzenesulfonate intercalated LDHs(MgAl-VBS LDHs).MgAl-VBS LDHs was prepared by the ion exchange method,and the structure and composition of the MgA1-VBS LDHs were determined by X-ray diffraction(XRD),infrared spectroscopy and elemental analysis.XRD and transmission electron microscopy(TEM)were employed to examine the structure of LDHs/PMMA nanocomposite.It was indicated that the LDHs layers were well exfoliated and dispersed in the PMMA matrix.The grafting of PMMA onto LDHs was confirmed by the extraction result and the weight fraction of grafted PMMA increased as the weight fraction of LDHs in the nanocomposites increased.     

甲烷二氧化碳介质阻挡放电转化产物分布研究

针对介质阻挡放电甲烷二氧化碳转化实验,分析了反应的产物分布,探讨了进料组成和反应器结构对反应的影响.反应产物包括:高H2/CO摩尔比的合成气、气态烃、高辛烷值的汽油组分、醇和酸等含氧有机物.对所述电极结构,产物的选择性随碳数增加而降低;高的甲烷进料浓度有利于烃的生成,对醇和酸的最佳甲烷进料体积分数范围在67.4％～75.1％;放电间隙越小,原料转化率和烃、酸的选择性越大,大的放电间隙对醇的生成有利.     

Preparation and Characterization of Nano-ZnFe2O4/TiO2 Films

The nano-ZnFe2O4/TiO2 films possess the functions of desulfurization and degradation for organic pollutants. The sols of ZnFe2O4/TiO2 were prepared by sol-gel method and coated on glass and porous ceramic by vertical coating and dipping-lift processes, respectively, and the samples were obtained after drying and sintering. The composition, appearance, absorption spectrum of the films, and the influence of the film on porous ceramic performances were analyzed using SEM, AFM, UV-Vis spectrometer, and mercury porosimeter, respectively, to determine the operation parameters of the multifunction porous ceramic elements for gas-purification.     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

多孔岩心的渗透性

The relaxation properties of water saturated in porous core are discussed and the distribution of proton transverse relaxation time and bi-exponential model of longitudiual relaxation time are obtained, which provide an illustration for two-model of fluids saturated in porous media. The cutoff value of T_1 based on relaxation specific property of fluids in porous core is adopted to improve the correlation between permeability and ?4T1b2.     

对-羟基苄叉丙二腈溶液在不同pH条件下吸收光谱的变化

在苄叉丙二腈衍生物系列中,N,N-二烷基氨基苄叉丙二腈及其类似化合物是研究和应用较多的一类。它们曾作为分子探针应用于高分子微环境特性和高分子聚合过程的研究。作为一种分子内的电荷转移络合物,它们在不同溶剂中的光谱行为也进行过研究,从而为进一步的开拓应用提供了重要依据。和前者相比,对-羟基苄叉丙二腈无论在基础研究或实际应用上都显得比较薄弱。正因如此,本工作合成了该化合物并对它进行了初步研     

An Environmentally Benign System for Synthesis of β-Hydroxylketones： L-Histidine Asymmetrically Catalyzed Direct Aldol Reactions in Aqueous Micelle and Water-like Media

The first histidine catalyzed direct aldol reactions of ketones with nitrobenzaldehydes in water and in poly（ethylene glycol） （PEG） were reported. It reveals that histidine is a good aldol catalyst for synthesis of β-hydroxylketones in water and in PEG, giving good to excellent yields of the respective products. Better enantioand regioselectivity were achieved using low molecular weight PEG as the media. The results show that histidine and PEG-200 or -300 may constitute a promising environmentally benign system for asymmetric synthesis of β-hydroxylketones.     

气相[（SiO2）nX]^—团簇产生机理

利用ＸｅＣｌ准分子激光烧蚀多种硅氧多孔结构材料，在负离子通道测得丰富的「（ＳｉＯ２）ｎＸ」＾－负离子团簇，并讨论了多孔网结构和表面活性基团的分布对激光能量的吸收，传输及团簇产生的重要作用。     

介质对配合物稳定性的影响——Ⅳ. Cu(SCN)+-NaNO3-tert-Butyl Alcohol-H2O体系，25℃

本文用分光光度法确定了25℃下配阳离子Cu(SCN)⁺在NaNO₃-叔丁醇-水介质中的稳定常数。混合溶剂中叔丁醇组成为0，5，10，15，20和25 wt%，离子强度范围为0.2～3.0 mole·dm^-3，溶液的pH=1.5～1.6。基于Pitzer理论用最小二乘多项式逼近法，确定了混合溶剂中配合物热力学稳定常数。讨论了配位反应的一级介质效应。