Analytical Solutions to Expansion of Cylindrical Cavity in Linear Softening Soil

Based on the results of conventional triaxial compression tests for a soil, a trilinear elasto-plastic model is proposed to simulate the stress-strain softening curve. According to this curve, the constitutive relation between the bulk strain and two pr…     

有限变形粘弹性接触的数学规划方法

研究有限变形粘弹性物体间的接触问题，同时考虑了刚体位移和摩擦等因素，导得该问题数学规划解法的标准形式，极易利用现有算法求解。     

粘弹性几何非线性夹层梁动响应分析

本文选用考虑横向剪切效应的退化梁单元，引入几何非线性假设，对具粘弹性阻尼层的夹层梁动响应及其衰减效果进行了研究，得到了一些具有应用价值的结论。     

大型多支承变刚度回转窑支承载荷分配问题

回转窑是冶金、水泥、耐火材料生产中的核心设备，是一种重载、大扭矩、多支点、静不定运行系统，由于其载荷和刚度分布复杂、各支承存在偏移，作用在它托轮上的支承载荷分配严重不均。本文针对回转窑载荷和刚度分布的特点，建立支承载荷求解的力学模型和线性方程组，导出支承载荷分配与支承偏差的关系式；用该方法对现场回转窑进行计算，得出该窑支承载荷分配的线性公式和一些分析结论，为生产中回转窑的状态分析、优化调控提供依据。     

A SINGULAR VALUE DECOMPOSITION BASED TRUNCATION ALGORITHM IN SOLVING THE STRUCTURAL DAMAGE EQUATIONS

The structural damage identification through modal data often leads to solving a set of linear equations. Special numerical treatment is sometimes required for an accurate and stable solution owing to the ill conditioning of the equations. Based on the singular value decomposition (SVD) of the coefficient matrix, an error based truncation algorithm is proposed in this paper. By rejection of selected small singular values, the influence of noise can be reduced. A simply-supported beam is used as a simulation example to compare the results to other methods.Illustrative numerical examples demonstrate the good efficiency and stability of the algorithm in the nondestructive identification of structural damage through modal data.     

压电材料椭圆切口的力学分析

在线性压电本构方程框架下，用复势函数方法对椭圆切口模型进行了精确的数值计算。完整地考虑了各向异性力电耦合效应以及切口内不同电介质的介电性质。给出了切口内部不同介电性质对压电材料内部应力的影响。指出了Sosa文章里的一些计算错误。由于现在文献中很少有关于电导通边界条件下理论解的数值结果，所以本文同时提供了不同电边界条件下理论解的数值结果，所以本文同时提供了不同电边界条件下的理论解的数值结果。最后通过最小势能原理建立了8结点有限元模型，对椭圆切口问题进行了计算并与理论解进行了仔细比较。     

On decentralized stabilization of linear large scale systems with symmetric circulant structure

The decentralized stabilization of continuous and discrete linear large scale systems with symmetric circulant structure was studied. A few sufficient conditions on decentralized stabilization of such systems were proposed. For the continuous systems, by introducing a concept called the magnitude of interconnected structure, a very important property that the decentralized stabilization of such systems is fully determined by the structure of each isolated subsystem that is obtained when the magnitude of interconnected structure of the overall system is given. So the decentralized stabilization of such systems can be got by only appropriately designing or modifying the structure of each isolated subsystem, no matter how complicated the interconnected structure of the overall system is. A algorithm for obtaining decentralized state feedback to stabilize the overall system is given. The discrete systems were also discussed. The results show that there is a great dfference on decentralized stabilization between continuous case and discrete case.     

VISCOPLASTIC SOLUTION TO FIELD AT STEADILY PROPAGATING CRACK TIP IN LINEAR- HARDENING MATERIALS

An elastic-viscoplastic constitutive model was adopted to analyze asymptotically the tip-field of moving crack in linear-hardening materials under plane strain condition. Under the assumption that the artificial viscosity coefficient was in inverse proportion to power law of the rate of effective plastic strain, it is obtained that stress and strain both possess power law singularity and the singularity exponent is uniquely determined by the power law exponent of the rate of effective plastic strain. Variations of zoning structure according to each material parameter were discussed by means of numerical computation for the tip-field of mode Ⅱ dynamic propagating crack, which show that the structure of crack tip field is dominated by hardening coefficient rather than viscosity coefficient. The secondary plastic zone can be ignored for weak hardening materials while the secondary plastic zone and the secondary elastic zone both have important influence on crack tip field for strong hardening materials. The dynamic solution approaches to the corresponding quasi-static solution when the crack moving speed goes to zero, and further approaches to the HR (Hui-Riedel) solution when the hardening coefficient is equal to zero.     

一种低精度惯性测量单元的精确标定技术

低精度惯性测量单元的温度特性和非线性严重，为补偿光纤陀螺的温度特性和非线性，通过高低温、多速率的标定实验研究了光纤陀螺输出电压与温度、转速的关系，采用零偏和标度因数统一标定的思想提出了光纤陀螺分段模型；为补偿MEMS加速度计的温度特^陛，通过高低温位置实验研究了加速度计输出电压与温度、输入加速度的关系，提出了加速度计分段模型。采用逐步线性回归对以上模型进行了简化。实时补偿效果表明，当温度从-30℃到60℃变化时，在±60（°）／s转速内角速度误差基本小于0．02（°）／s，加速度误差小于0．005g．