多传感器融合技术在低成本车辆组合导航定位系统中的应用

采用多传感器信息融合技术，运用位置/航向的输出校正和元件参数误差的补偿校正的方法，利用一阶马尔可夫模型建立了传感器参数的误差模型，提出了基于集中卡尔曼滤波的GPS/INU车辆组合导航算法。仿真结果表明上述方法是行之有效的。     

Experimental and FEM study of windshield subjected to high speed bird impact

Both experimental and finite element model (FEM) results are presented for the dynamic strength behavior of windshield subjected to bird impact. The experimental data taken from a series of high speed photographs are compared with the numerical results predicted by using FEM in which the windshield was modeled entirely with solid elements and the bird body was approximately simulated by an elastic-plastic material with failure element behavior. Effective plastic strain and element pressure were adopted as the failure criteria and once the pressure or the effective plastic strain of an element reached the critical value, the element would lose the tensile resistance capability completely. The deflection and stress distribution in the windshield were obtained. It is shown that the result from the finite element analysis agrees with those from the full-scale bird impact test. The project supported by the National Natural Science Foundation of China (10272011)     

STRUCTURAL DAMAGE MODEL OF UNSATURATED EXPANSIVE SOIL AND ITS APPLICATION IN MULTI-FIELD COUPLE ANALYSIS ON EXPANSIVE SOIL SLOPE

Focused on the sensitivity to climate change and the special mechanical characteristics of undisturbed expansive soil, an elastc-plastic damage constitutive model was proposed based on the mechanics of unsaturated soil and the mechanics of damage. Undisturbed expansive soil was considered as a compound of non-damaged part and damaged part. The behavior of the non-damaged part was described using non-linear constitutive model of unsaturated soil. The property of the damaged part was described using a damage evolution equation and two yield surfaces, i.e., loading yield (LY) and shear yield (SY). Furthermore, a consolidation model for unsaturated undisturbed expansive soil was established and a FEM program named UESEPDC was designed. Numerical analysis on solid-liquid-gas tri-phases and multi-field couple problem was conducted for four stages and fields of stress, displacement, pore water pressure, pore air pressure, water content, suction, and the damage region as well as plastic region in an expansive soil slope were obtained.     

ANALYSIS ON THE MAGNETO-ELASTIC-PLASTIC BUCKLING/SNAPPING OF CANTILEVER RECTANGULAR FERROMAGNETIC PLATES

An analysis of buckling/snapping and bending behaviors of magneto-elastic-plastic interaction and coupling for cantilever rectangular soft ferromagnetic plates is presented.Based on the expression of magnetic force from the variational principle of ferromagnetic plates,the buckling and bending theory of thin plates,the Mises yield criterion and the increment theory for plastic deformation,we establish a numerical code to quantitatively simulate the behaviors of the nonlinearly multi-fields coupling problems by the finite element method.Along with the phenom- ena of buckling/snapping and bending,or the characteristic curve of deflection versus magnitude of applied magnetic fields being numerically displayed,the critical loads of buckling/snapping, and the influences of plastic deformation and the width of plate on these critical loads,the plastic regions expanding with the magnitude of applied magnetic field,as well as the evolvement of deflection configuration of the plate are numerically obtained in a case study.     

高效液相色谱法测定塑料食品包装材料中8种苯并三唑类紫外吸收剂EI北大核心CSCD

建立了同时测定塑料食品包装材料中8种苯并三唑类紫外吸收剂(UV-P、UV-234、UV-320、UV-326、UV-327、UV-328、UV-329和UV-360)的高效液相色谱-二极管阵列检测法。样品经5 m L乙酸乙酯+二氯甲烷(V/V=4:1)在20℃超声提取10 min后,以甲醇、乙腈和水为流动相梯度洗脱,经Eclipse XDB-C_(18)柱分离,在340 nm处检测。UV-P和UV-360以及其他6种紫外线吸收剂分别在0.02~10,0.2~10和0.1~10 mg/L的质量浓度范围内呈良好的线性关系。8种紫外吸收剂的线性相关系数均大于0.9999;仪器的检出限(S/N=3)为0.0074~0.1250mg/L。3种不同添加水平下的样品加标平均回收率为93.7%~114.3%,相对标准偏差均不高于5.0%(n=6)。     

过载-振动复合环境下液浮积分陀螺仪动力学分析

采用有限元数值计算方法对液浮积分陀螺仪在过载—振动复合环境中的动力学特性进行研究。对液浮积分陀螺仪浮子组件谐态和模态进行了分析计算，获得了复合载荷下浮子组件质心的附加偏移的数据，从而为分析陀螺仪的附加误差提供了依据。     

ICP-AES法测定塑料中镉含量的不确定度评定

介绍了用ICP-AES法测定塑料中镉含量的不确定度的评定方法.分析了测量不确定度的主要来源,对测试不重复性、工作曲线非线性、标准溶液、样品质量、定容体积等5个不确定度分量进行分析计算,最后合成ICP-AES法测定塑料中镉含量的相对标准不确定度为1.709%,并计算求得扩展不确定度.     

欧盟发布塑料食品接触材料新法规

欧盟委员会于2011年1月15日在其官方公报上发布了塑料食品接触材料的新法规,对用于食品接触材料中的塑料材料提出了要求。新的法规包括一系列规定,并决定于2011年2月4日生效。最早的产品应用将于2011年5月1日开始。按照法规性质,欧盟并未强制要求成员国将其转化为国家法律。     

复合塑料包装袋中重金属迁移量的测定

将复合塑料袋用4％乙酸浸泡,采用石墨炉原子吸收光谱仪对其中的铅、镉、铬、镍、铜、砷迁移量进行了测定.结果表明:各元素的吸光度与质量浓度呈良好的线性关系,相关系数为0.998 9～0.9999,元素Pb、Cd、Cr、Ni、Cu、As的检出限分别为1.04、0.05、0.98、1.00、0.97、0.96 μg/L,各元素...     

橡胶增韧塑料机理的探讨

本实验采用透射电镜及新的ＲｕＯ_４染色方法，观察研究了ＰＣ／ＰＢＴ，ＰＣ／ＭＢＳ／ＰＳ共混体系和ＡＡＳ共聚共混物的银纹结构形态。结果表明：不同聚合物体系银纹产生的数量，银纹的发展、终止及支化各不相同。这时研究塑料增韧机理很有意义。