Bonding of Hydroxyl and Epoxy Groups on Graphene： Insights from Density Functional Calculations

Density functional theory and GGA-PW91 exchange correlation function were performed to simulate the bonding behavior of hydroxyl and epoxy groups on the graphene surface. We compared the different binding energies for two epoxy groups, as well as one hydroxyl group and one epoxy group on all possible positions within a 6-fold ring, respectively. The calculated results suggest that two oxygen-containing groups always tend to bind with the neighboring carbon atoms at the opposite sides. Moreover, two hydroxyl groups on the meta position are unstable, and one of the hydroxyl groups easily migrates to the para position. In contrast to the disperse arrangement, the aggregation of multiply hydroxyl groups largely enhances the binding energy of every hydroxyl group. It is worth noting that the binding sites and hydrogen bonds play an important role in stability. Our work further points out the number of oxygen-containing groups and the location of oxide region largely influence the electronic properties of graphene oxide.     

磷酸基团在环丙沙星光敏损伤DNA中的作用

利用紫外-可见稳态吸收光谱, 稳态荧光发射光谱和激光光解瞬态光谱实验方法研究了磷酸基团在环丙沙星(CPX)光敏损伤DNA中的作用. 紫外-可见和稳态荧光光谱实验证实了磷酸根离子影响环丙沙星的稳态吸收和发射谱, 实验结果表明磷酸根是通过弱相互作用与环丙沙星结合. 我们还利用激光闪光光解实验分别研究了鸟苷(Gua), 脱氧鸟苷(dG)以及脱氧鸟苷酸(dGMP)对环丙沙星三线态(³CPX^*)的影响, 通过对比实验证实了在环丙沙星光敏损伤dGMP中, 由于磷酸基团的存在, 导致了环丙沙星三线态吸收峰的改变, 从而改变了光敏损伤反应的途径. 通过研究发现, 光敏损伤途径的改变是由于dGMP结构上磷酸基团通过氢键与环丙沙星结合所造成的. 最后, 根据实验结果并对比Gua, dG和dGMP的结构, 提出了一个合理的磷酸基团的作用机理.     

茚环3-位手性基团取代的桥联二茚锆络合物合成及表征

将(+)-新孟基和(+)-异莰基引入茚环结构中,合成得到三个茚环3-位手性基团取代的桥联二茚配体化合物1a~3a.利用这些配体化合物的二锂盐与四氯化锆反应,最终分离得到两个C2-对称的亚乙基桥联取代二茚锆络合物2b和3b,相应具类内消旋结构、C1-对称的锆络合物2c和3c未能分离得到纯品.所有配体化合物和络合物均通过1H NMR、13C NMR、元素分析(或HRMS)的鉴定.对络合物2c进一步用X射线单晶衍射测定了晶体结构.2c属正交晶系,其空间群为P2(1)2(1)2(1),晶胞参数a=10.946(4),b=13.377(4),c=24.294(8),α=β=γ=90°,Mr=694.94,V=3557(2)3,Dc=1.298 g/cm3,Z=4,F(000)=1464,μ=0.486 mm-1,R=0.0296,wR=0.0683[I2σ(I)].     

N—N键合成方法的研究进展

N—N键广泛存在于药物、天然产物和有机功能材料中,如何高效构建N—N键是有机合成的一个重要研究方向.基于含氨基、氰基、硝基和叠氮基等含氮基团的有机化合物非常多,直接利用这些含氮基团进行N—N键偶联为合成含N—N键结构单元的有机化合物提供了新的策略.综述了近年来发展的分子间和分子内构建N—N键的合成方法,并且对该方法存在的难点以及未来发展方向进行了展望.     

基于荧光强度比值法可用于现场测量的低成本聚合物光纤温度传感器

基于荧光强度比值法,设计了一种使用两种荧光染料的光纤温度传感器.实验中,罗丹明B和罗丹明110分别为对温度敏感和对温度不敏感的荧光传感物质,利用聚合物光纤来传导激发光及接收荧光.由于两种染料的荧光谱峰相距60 nm,因此容易将二者对应的荧光谱分开.通过确定能代表两种染料的最优荧光光谱范围,获得具有良好线性度的温度-荧光强度标定曲线.实验研究了不同浓度的荧光染料对标定曲线的影响,当染料浓度为0.3 g/L时,可获得0.28℃的最小均方误差及0.0128/℃的灵敏度.此外,该传感器还具备一定的抗光源扰动和抗荧光染料漂白的能力.     

N-Protection of amines using pyridinium 2, 2, 2-trifluoroacetate ionic liquid as an efficient and reusable catalyst

A simple, green, and efficient method for the N-tert-butoxycarbonylation of amines by pyridinium 2,2,2- trifluoroacetate （[Py][OTf]） as an efficient and reusable catalyst is reported. In general, electron donating groups on aryl group give rise to the higher yields than electron withdrawing groups. Clean reaction, short reaction times, high yields, reusability of catalyst, and easy preparation of it are some advantages of this work.     

Blue electroluminescence of a novel Zn~(2+)–β-diketone complex with a carbazole moiety

In this letter, a novel zinc complex of Zn(ECTFBD)2 was synthesized by an environment-friendly grinding technique in high yield. Its structure was confirmed by1H NMR, MS and EA. HECTFBD is 1-(9-ethyl-9Hcarbazol-3-yl)-4,4,4-trifluorobutane-1,3-dione. Zn(ECTFBD)2-based light-emitting devices were fabricated. The architecture of the devices was ITO/PEDOT(40 nm)/100 wt% PVK: 40 wt% OXD-7: x wt% Zn(ECTFBD)2(85 nm)/CsF(1.5 nm)/Al(100 nm), where x = 1, 5, and 10(relative to the mass of PVK and OXD-7). The three devices displayed blue emissions with peaks at 450, 458, and 460 nm, respectively. A maximum luminous efficiency of 0.86 cd/A and a luminance of 228 cd/m2were achieved by the 1 wt% doped device. So, we demonstrated further that Zn2+–b-diketone complexes can be effectively severed as a class of new electroluminescent materials. In addition, the thermal stability of Zn(ECTFBD)2 was tested and the UV–vis and photoluminescent behaviors of Zn(ECTFBD)2 in CH2 Cl2 were investigated.     

Synthesis,chiroptical properties of a helical polyacetylene derivative carrying urea moieties

A novel phenylacetylene derivative containing urea groups was synthesized and polymerized with a Rh catalyst to give the corresponding polymer, poly（1） with moderate number-average molecular weights. The poly（1） was soluble in toluene, CHCI3, CH2C12, THF, DMF, and DMSO, but insoluble in hexane, diethyl ether and MeOH. The specific rotation and circular dichroism （CD） spectroscopic studies revealed that poly（1） took predominantly one-handed helical structures. The presence of intramolecular hydrogen bonding was confirmed by liquid-state IR spectroscopy. The helicity of poly（1） could be tuned by temperature and anion. The helical conformation of the polymer was stable against Br but susceptible to F.     

单分子电导测量技术及其影响因素

Molecular electronics is an important field for the application of nanotechnologies with an ultimate goal of building functional devices using single molecules or molecular arrays to realize the same functionality as macroscopic devices. To attain this goal, reliable techniques for measuring and manipulating electron transfer processes through single molecules are essential. There are various techniques and many environmental factors influencing single-molecule electronic conductance measurements. In this review, we first provide a detailed introduction and classification of the current well-accepted techniques in this field for measuring single-molecule conductance. All available techniques are summarized into two categories: the fixed junction technique and break junction technique. The break junction technique involves repeatedly forming and breaking molecular junctions by mechanically controlling a pair of electrodes moving into and out of contact in the presence of target molecules. Single-molecule conductance can be determined from the conductance plateaus that appear in typical conductance decay traces when molecules bind two electrodes during their separation process. In contrast, the fixed junction technique is to fix the distance between a pair of electrodes and measure the conductance fluctuations when a single molecule binds the two electrodes stochastically. Both techniques comprise different application methods and have been employed preferentially by different groups. Specific features of both techniques and their intrinsic advantages are compared and summarized in Section 4.     

含硅功能化聚烯烃:合成及应用

聚烯烃功能化改性是获得高性价比新材料的有效途径。含硅功能化聚烯烃(SFPO)是聚烯烃分子结构中含有机硅功能基团或有机硅聚合物链段的一类功能化聚烯烃的统称。由于有机硅功能基团及有机硅聚合物特殊的理化性质,SFPO通常具有丰富反应性或优异性能,成为一类有代表性的功能化聚烯烃。SFPO可以作为反应性中间体,用于制备具有复杂拓扑结构的功能化聚烯烃(如星型聚合物、梳型聚合物、接枝共聚物)或聚烯烃共价键接枝改性纳米材料;SFPO还可作为功能性添加剂(如增容剂、加工助剂,表面改性剂),用于开发聚烯烃新材料。近年来,研究人员在含硅功能化聚烯烃研究领域取得了系列进展,本文旨在对相关工作进行系统总结,以期引起同行注意并促进相关研究深入发展。