像增强器用中波红外辐射可激励的新型荧光材料

1 引言目前,许多研究都集中于研制各种用途的中波红外成像系统。这些应用从工业用热成像一直扩展到探测车辆、导弹等的军用热成像。可反映中波红外成像目前技术水平的是加工碲镉汞、锑化铟等半导体探测器的线阵或面阵,并把它们组装到一适当光学成像系统。但是,材料和器件的产额低,这种器件不仅制作难而且成本高。本文介绍一种加工成本低用于中波红外成像的新型探测介质,具体地讲,这种新介质是一种可将中波红外     

极低频高压脉冲电场对萌发玉米种子超弱发光的影响

生物超弱发光是来自细胞的电磁信号,在揭示电磁生物学效应的机理研究中具有重要作用.为了研究极低频脉冲电场生物学效应及其机理,采用基于玉米细胞电位波动频率的1 Hz极低频高压脉冲电场处理萌发玉米种子,结果发现玉米种子的萌发过程明显加快,根长和芽长均有显著增长.对萌发种子的自发发光和延迟发光的测量结果显示,1 Hz极低频高压脉冲电场对萌发过程中玉米种子的自发发光和延迟发光积分强度都有明显的促进作用,表明1 Hz极低频高压脉冲电场加速了玉米种子萌发过程中的DNA合成和细胞代谢.     

白光发光二级管用红色荧光粉LiSrBO3: Eu3+的制备与发光性能研究

采用高温固相法制备了LiSrBO₃:xEu³⁺ 荧光粉, 并通过XRD, 红外(FITR) 和荧光光谱(PL) 等对其表征. 结果表明, LiSrBO₃: Eu³⁺ 荧光粉可被波长为395 nm 的紫外线和466 nm 的蓝光有效激发, 且发射主波长为612 nm (Eu³⁺的电偶极跃迁⁵D₀ →⁷F₂) 的红光. 研究了Eu³⁺ 掺杂浓度对LiSrBO₃: Eu³⁺ 材料发光强度的影响, Eu³⁺ 掺杂浓度为6% 时样品的发射强度最大, 并且证实Eu³⁺ 之间的能量传递机制为电偶极子- 电偶极子相互作用. Li⁺, Na⁺, K⁺ 作为电荷补偿剂的引入全部导致LiSrBO₃: Eu³⁺ 材料发射强度增强, 其中, Li⁺ 的引入要优于Na⁺ 和K⁺. 少量Al³⁺的掺杂降低了Eu³⁺ 所处格位的对称性, 增强了Eu³⁺ 的612 nm 的电偶极发射, 改善了LiSrBO₃: Eu³⁺ 红色材料的色纯度. 关键词： 白光发光二级管 光致发光 浓度猝灭 电荷补偿剂     

Y3Al5O12：Eu^3＋磷光体的溶胶—凝胶法合成及发光特性

以金属烷氧基化合物为原料．采用溶胶-凝胶法在1000℃下合成了Eu^3 掺杂的Y3Al5O12(YAG)磷光体。利用TG-DSC，XRD和发光光谱等对样品进行了表征。结果表明，YAG：Eu^3 的晶相形成温度为991℃。Eu^3 在非晶态和晶态YAG中的发射光谱有明显差异。研究了Eu^3 含量和烧结温度对Eu^3 的^5D0→^7F1和^5D0→^7F2发射峰强度的影响。随煅烧温度的升高和Eu^3 浓度的增加，Eu^3 发射峰强度增强。     

A New Kind of Buffer Layer of TiO2 Self—Assembled Material in Organic Electroluminescent Devices

A new kind of TiO2 self-assembled nanometre material has been fabricated and is used as a hole-injecting buffer layer in organic electroluminescent devices.The luminance and the efficiency of a devicy individually rises from 1500cd/m^2 to 5000cd/m^2 and from 2.0cd/.A to 3.92cd/A at the current density of 100mA/cm^2.The enhancements in brightness and efficiency are attributed to an improved balance of hole and electron injections due to blocking of the injected holes by the buffer layer and a more homogeneous adhesion of the hloe transprting layer to the anode.     

High—Efficiency Organic Double—Quantum—Well Light—Emitting Devices Using 5,6,11,12—Tetraphenylnaphthacene Sub—monolayer as Potential Well

The double-quantum-well organic light-emitting devices of indium-tin-oxide (ITO)/NPB (50nm)/rubrene (0.05nm)/NPB (4nm)/rubrene (0.05nm)/Alq3 (50nm)/LiF (0.5nm)/Al were fabricated, in which N,N-bis-(1-naphthyl)-N,N‘-diphenyl-1,1‘-biphenyl-4,4‘‘‘‘‘‘‘‘-diamine (NPB) is used as a barrier potential or hole transport layer, tris (8-hydroxyquinoline) aluminium (Alq3) used as electron transport layer, and 5,6,11,12-tetraphenylnaphthacene (rubrene) as a potential well and emitter. The brightness can reach 18610cd/m^2 at 13V. The maximum electroluminescent efficiency of the device was 6.61cd/A at 7V, which was higher than that of common dope-type devices. In addition, the electroluminescence efficiency is relatively independent of the drive voltage in the range from 5 to 13V.     

发光材料[ZnxMg6-xAl2(OH)16]2+[S·2H2O]2-∶Mn2+的光致发光

本文报道了过渡金属Mn2+离子的含量对二维纳米发光材料[ZnxMg6-xAl2(OH)16]2+[S*2H2O]2-发光强度的影响,并研究了其他合成条件如Zn2+含量、硫化时间、灼烧温度等对发光材料、发光强度的影响.     

光电倍增管在磷酸液声致发光实验中的应用

对不同厚度液体进行光强测量,深入探索空化气泡的运动,研究发光机理很有意义。用超声激励法在磷酸液体中实现多泡声致发光,研究不同共振频率下发光的特点。利用光电倍增管多次测量发光强度相互比较,结果是在液体厚度10 cm、驱动频率f=21.061kHz和f=20.316kHz时,周期性较好为50μs,液体通过漩涡集中气泡可以使更多气泡发光;在液体厚度3 mm、驱动频率f=17.91kHz和f=19kHz时,周期性很好为25μs;且光信号都较强。结论是磷酸中声致发光强度、周期与液体厚度、驱动频率密切相关。本文以磷酸液多泡声致发光实验研究为基础,从内部和外部原理来出发,详细介绍了光电倍增管在多泡声致发光光强测量中的实用,为今后研究者提供了一些经验。根据实验过程中遇到的一些实际问题提出了建议和改善意见。     

Emission enhancement in Er^3＋/Pr^3＋-codoped germanate glasses and their use as a 2.7-μm laser material

Emission enhancement at 2.7 μm is observed in Er^3＋/Pr^3＋--codoped germanate glasses when pumped by a 980-nm laser diode. Significant reductions in 1.5-μm emission and upeonversion intensity indicate efficient energy transfer between Er^3＋ and Pr^3＋; the energy transfer efficiency is as high as 77.4%. The mechanisms of energy transfer are discussed in detail. The calculated emission cross-section of Er^3＋/Pr^3＋- codoped germanate glass is 8.44× 10 ^-21 cm^2, which suggests that Er^3＋/Pr^3＋-codoped germanate glass can be used to achieve efficient 2.7-μm emission.     

Enhanced NIR emission in Ce^3＋/Er^3＋-doped YAG induced by Bi^3＋ doping

Ce^3＋/Er^3＋/Bi^3＋ triply-doped yttrium aluminum garnet （YAG） is synthesized using co-precipitation method. The Bi^3＋ concentration-dependent near-infrared （NIR） emission behavior is systemically in- vestigated. The NIR emission of Er^3＋ ions at 1531 nm is enhanced threefold by the addition of 7 mol% Bi^3＋. Bi^3＋doping results in the formation of exciton in YAG and the variation in the local environment of the doped rare-earth ions. The enhancement in NIR luminescence is ascribed to the combined effects of the sensitization of exciton→Ce^3＋ →Er^3＋ and the Bi^3＋ doping-induced adjustment of the local environment for Ce^3＋ and Er^3＋ ions.