基于混酸回流制备碳点的中和过程

Carbon dots (C dots) are relatively novel carbon nanomaterials that have attracted significant interest due to their unique photoluminescence, good biocompatibility, and stability. The preparation methods of C dots was usually summarized into "top-down" and "bottom-up", and mixed acid reflux is a top-down strategy that can be used to synthesize C dots, during which neutralization is a necessary step that can significantly influence the properties and potential applications of the final product. Previously, this research area mainly focused on tuning the properties of C dots by changing the starting materials and/or varying the reaction conditions; the influence of the reagents used during neutralization has been largely ignored. As the previously reported C dots prepared by mixed acid reflux were obtained from different starting materials under varied conditions, a meaningful comparison is difficult. Herein, yellow-emitting C dots were prepared by mixed acid-refluxing a carbon-rich material derived from fullerene carbon soot. For the same batch of as-prepared C dots, the influences of four reagents, i.e., NaOH, Na₂CO₃, K₂CO₃, and NH₃·H₂O, during neutralization on the structures and photoluminescence of the resulting C dots were investigated in detail. The results of thermogravimetric analysis, Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy clearly showed that the reagent used during neutralization can affect the degree of dissociation of the acidic functional groups on the C dots. This is further supported by examination of the C dot/surfactant mixtures where subtle changes in the phase behavior were observed. Structural changes of the C dots cause variations in their surface states, ultimately altering the optical characteristics, including UV-vis absorption and fluorescence. Among the treated C dots, the sample prepared with Na₂CO₃ showed the strongest emission under the same excitation wavelength, while that prepared with NH₃·H₂O exhibited a distinct red shift (~8 nm) in the emission curve. The results presented herein provide clear evidence that neutralization reagent selection is important for optimizing the properties of the resulting C dots obtained by mixed acid reflux. In addition, the photoluminescence of the C dots can be influenced by their counterions, providing a novel method for tuning the properties of C dots while explaining their behavior in saline solutions. In short, the basicity of the neutralizing reagent and the type of counterions affect the structure of the C dots surface, which brings different performances. This work reminds researchers that it is necessary to use the type of neutralizing reagent as an experimental condition when preparing C dots in the future.     

柱切换液相色谱法快速定量检测参附注射液中乌头碱类生物碱和人参皂苷

利用柱切换液相色谱,建立了参附注射液中苯甲酰新乌头原碱、苯甲酰乌头原碱、苯甲酰次乌头原碱、新乌头碱、次乌头碱和乌头碱6种乌头碱类生物碱,以及Rg1、Re、Rf、Rb1、Rc、Ro、Rb2、Rb3、Rd 9种人参皂苷的分析方法。首先利用强阳离子交换的在线固相小柱选择性富集和净化样品中生物碱类成分,优化了色谱条件;并采用EC－C18柱作为人参皂苷的分析柱,通过优化实验条件,结合柱切换方式,去除了样品中辅料等大极性基质成分对色谱柱的污染,实现了生物碱分析和人参皂苷分析的自动切换。结果显示,样品中的生物碱和人参皂苷分离良好,线性相关系数（r2）均大于0.999,连续进样精密度的相对标准偏差（RSD） < 2.0%,重复性的RSD < 2.0%;其中6种生物碱的平均回收率为95.1%～98.6%,检出限为4.0～8.2 ng/mL;9种人参皂苷的平均回收率为91.7%～104%。所构建的基于柱切换液相色谱技术的在线固相萃取方法能够有效去除样品中的基质干扰,快速完成参附注射液中3种单酯型生物碱和9种人参皂苷的快速定量,同时也可对3种双酯型生物碱进行限量检测,可应用于药物的质量评价。     

基于甲基苯丙胺和吗啡的胶体金免疫层析试剂盒检测法的可靠性评价

通过固相萃取-液相色谱-多级质谱(SPE-LC-MS/MS)联用技术和毒品胶体金免疫层析试剂盒检测法对13种中药及调味品样品中甲基苯丙胺及吗啡分别进行定量分析,依据LC-MS/MS检测结果,对毒品胶体金免疫层析试剂盒检测法进行可靠性评价。实验结果表明:型号1试剂盒对甲基苯丙胺和吗啡的特异性均不高,检测准确率分别为57.7%与78.8%;型号2试剂盒对甲基苯丙胺的特异性不足,准确率为73.1%,但对吗啡的检测准确率达到100%。在利用毒品胶体金免疫层析试剂盒进行毒品快速筛查时,应注重排除干扰因素以提高免疫胶体金层析试剂盒的检测准确度。     

基于混合吸附剂磁性固相萃取/高效液相色谱-串联质谱法测定水中磺胺和喹诺酮类抗生素残留

通过制备磁性大孔有机共聚物材料(Fe₃O₄@Si O₂@PLS)和磁性金属有机骨架材料(Fe₃O₄@ZIF-8),将两种材料同时作为磁性吸附剂,建立了混合吸附剂磁性固相萃取/高效液相色谱-串联质谱(MSPE/HPLC-MS/MS)测定水中4种磺胺类和8种喹诺酮类抗生素残留的分析方法。通过扫描电子显微镜(SEM)、傅里叶变换红外光谱(FT-IR)和X-射线衍射仪(XRD)对两种磁性材料进行表面形貌和结构表征,结果显示,亲水亲脂大孔有机共聚物(PLS)包覆于磁性纳米粒子Fe₃O₄表面,且Fe₃O₄成功附着于正六边形金属有机骨架材料(ZIF-8)晶体表面,可以满足磁性固相萃取的要求。通过优化吸附剂用量、萃取方式、吸附时间、样品p H值、洗脱剂种类及洗脱时间,在最优的实验条件下,12种目标物的线性范围为0.5～10μg/L,相关系数(r²)为0.996 1～0.999 8,检出...     

固相萃取/液相色谱-串联质谱法测定水果蔬菜中双胍辛胺的残留量

建立了测定沃柑、菠萝蜜、苹果、葡萄、生菜、黄瓜、西红柿、芦笋等水果蔬菜中双胍辛胺残留量的固相萃取/液相色谱-串联质谱方法。试样用0.2%乙酸水提取,二氯甲烷萃取杂质,提取液经WCX固相萃取柱净化,10%甲酸乙腈洗脱,氮吹至近干后以0.2%甲酸水复溶。采用甲醇和0.2%甲酸水为流动相,经Eclipse Plus C18(2.1 mm×100 mm,1.8μm)分离,在电喷雾离子源正离子模式下采用双胍辛胺的双电荷加合母离子m/z 178.8及其子离子m/z 100.0和187.0进行多反应监测（MRM）扫描,基质加标曲线进行定量。结果表明,双胍辛胺在0.005～0.160 mg/kg范围内线性关系良好,相关系数r≥0.995;0.010、0.020、0.050 mg/kg加标水平下的平均回收率为88.5%～109%,相对标准偏差（RSD,n=6）为2.1%～8.8%;方法检出限为0.005 mg/kg,定量下限为0.010 mg/kg。该方法快速、准确、灵敏,适用于水果蔬菜中双胍辛胺残留量的测定。     

三嗪基多孔有机材料的合成及在固相微萃取应用中的研究进展

三嗪基多孔有机材料(TPOPs)具有较大的比表面积、可调的孔道结构、较高的热和化学稳定性、丰富的π键体系等诸多优点,目前被广泛应用于气体储存、催化、能源转化和吸附等诸多领域。基于TPOPs的固相微萃取(SPME)技术近年来引起了人们的极大兴趣,成为样品前处理技术领域的研究热点之一。该文简要地综述了近年来TPOPs的合成方法及其在固相微萃取领域的应用与发展,并对该领域研究进行了展望。     

大麻中3种酚类成分测定专用固相萃取柱的设计与应用

大麻中的主要成分大麻二酚(CBD)、大麻酚(CBN)和 Δ9-四氢大麻酚(Δ9-THC)的含量决定了其性质和应用.在液相色谱分析中,由于大麻提取液中含有较多杂质,需要净化.该文基于大麻中CBD、CBN和 Δ9-THC的结构特征及样品基质组成,根据中性氧化铝、硅酸镁和石墨化炭黑的不同表面特征,考察了这3种吸附剂对大麻提取...     

超高效液相色谱-串联质谱法同时测定土壤中30种抗生素

土壤基质复杂,土壤中残留的抗生素种类繁多,浓度多为痕量水平,高灵敏度的仪器方法、有效的净化和富集方法、多种类抗生素的同时检测是土壤中抗生素检测的重点和难点.该研究建立了固相萃取-超高效液相色谱-串联质谱法同时测定土壤中7类(磺胺类、氟喹诺酮类、四环素类、大环内酯类、β-内酰胺类、酰胺醇类和林可酰胺类)30种抗生素的方法...     

混合型离子交换液相色谱-串联质谱法检测鸡蛋中10种氨基糖苷类药物残留

该研究系统地优化了样品前处理过程及仪器分析中影响氨基糖苷残留分析准确度与灵敏度的各主要因素,建立了鸡蛋中10种氨基糖苷类药物(链霉素、双氢链霉素、潮霉素B、卡那霉素、阿米卡星、妥布霉素、安普霉素、大观霉素、新霉素、庆大霉素)残留量的混合型离子交换液相色谱-串联质谱分析方法。样品经10 mmol/L乙酸铵缓冲溶液(含0.4 mmol/L EDTA和50 g/L三氯乙酸)超声提取,调节pH至6~7后,经PRiME HLB固相萃取柱富集净化,采用SIELC Obelisc R色谱柱分离,以乙腈和1.0%(v/v)甲酸水溶液(含1 mmol/L甲酸铵)为流动相进行梯度洗脱,在正离子、多反应监测模式下经串联质谱仪测定,外标法定量。该方法在5~200 μg/L质量浓度范围内线性关系良好,相关系数(r²)均大于0.99;方法的检出限(LOD, S/N≥3)为2~5 μg/kg,定量限(LOQ, S/N≥10)为5~10 μg/kg。在空白鸡蛋中进行LOQ、20 μg/kg、100 μg/kg 3个水平的加标回收实验,方法的平均回收率(n=6)为68.1%~111.3%,相对标准偏差为1.2%~12.3%。利用该方法对市售的20批次鸡蛋样品进行测定,均未检出目标物。本方法简单、灵敏、准确,可实现鸡蛋中10种氨基糖苷类药物残留的批量检测。     

氟化共价有机聚合物固相微萃取-高效液相色谱测定水产品中丁香酚类麻醉剂

氟化共价有机聚合物(F-COP)具有较大的比表面积和吸附容量,对丁香酚类化合物具有特异性吸附.该文以2,3,5,6-四氟对二苯甲醛(TFA)和1,3,5-三(4-氨苯基)苯(TAPB)为单体,三氟甲磺酸钪(Sc(OTf)3)为催化剂在室温下快速合成F-COP,并将其作为固相微萃取(SPME)吸附剂,结合高效液相色谱-紫...