Effects of barium on the nonlinear electrical characteristics and dielectric properties of SnO2-based varistors

The effects of barium on electrical and dielectric properties of the SnO_2·Co_2O_3·Ta_2O_5 varistor system sintered at 1250℃ for 60min were investigated. It is found that barium significantly improves the nonlinear properties. The breakdown electrical field increases from 378.0 to 2834.5V/mm, relative dielectric constant (at 1kHz) falls from 1206 to 161 and the resistivity (at 1kHz) rises from 60.3 to 1146.5kΩ·cm with an increase of BaCO_3 concentration from 0mol% to 1.00mol%. The sample with 1.00mol% barium has the best nonlinear electrical property and the highest nonlinear coefficient (α=29.2). A modified defect barrier model is introduced to illustrate the grain-boundary barrier formation of barium-doped SnO_{2}-based varistors.     

CuZnAlZr催化剂上甲醇氧化水蒸气重整制氢I．催化剂组成的优化

采用共沉淀法制备了不同配比的CuZnAlZr复合氧化物催化剂，并通过XRD和TPR等表征技术及活性评价，考察了催化剂各组分配比对活性的影响，从而对各组分配比进行了优化．结果表明，组成为(Cu7Zn3)7(Al6Zr4)3的催化剂具有最高的催化活性，反应温度为200℃时，甲醇转化率可高达91％，而重整气体中CO的体积分数仅为0．12％．具有较高分散性及高还原性能的表相Cu组分的增加有利于提高催化剂的活性，Zn可以起到隔离和分散Cu的作用，而Al和Zr的存在可以稳定表相Cu^2 的存在形式．     

Photocatalytic Synthesis of Oxygenates from Gaseous CO2 and CH4 over Semiconductor

Photoinduced synthesis of CO2 and CH4 was investigated using a batch reaction system on several photoactive materials supported on silicon dioxide. Single semiconductor showed higher selectivity to C1 compounds. The production of C2-C3 oxygenates took place preferentially on composite semiconductor photocatalysts. In particular, it was found that acetone was the primary product over Cu/CdS-TiO2/SiO2.     

Mid—Infrared Optical Parametric Oscillator Based on All—Solid—State—Pumped Periodically Poled LiNbO

We report the tunable mid-infrared generation with a periodically poled LinbO3(PPLN).Using an all-solid-state pumped Nd:YVO4 laser as the pump source and a PPLN nonlinear crystal with grating periods of 28.2-30.8μm,we have achieved wavelength conversion in the 2.90-4.05μm spectral range by period tuning.The use of confocal cavity design has brought a compact,all-solid-state configuration with an average output powers of idler up to -200mW.The maximum power of 277mW was obtained at the wavelength of 3.35um.     

第5届国际固体断裂与强度大会介绍

第5届国际固体断裂与强度大会于2003年10月19—23日在日本仙台市东北大学学术交流中心举行，当地电视台还做了专门的采访报道．     

激光微加工技术在ICF中的应用

建立以二极管泵浦的Nd：YAG连续固体激光器为基础的微结构加工平台。激光器谐振腔输出基横模，输出波长1064nm，采用调Q技术压缩脉宽，激光器输出峰值功率大于10w，可选择连续及脉冲工作方式。     

固体激光器的灯泵浦和二极管泵浦方式比较

对固体激光器的灯泵浦和二极管泵浦方式进行了比较,详细分析了不同类型的固体激光器所适用的泵浦方式.指出二极管泵浦固体激光器是今后固体激光器的发展趋势.     

超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯复合材料的输运性质

采用热压法获得了具有不同混合比例的超导氧化物La1.85Sr0.15CuO4/超高分子量聚乙烯导电复合材料,并利用x射线衍射、扫描电子显微镜和标准四引线方法对复合材料的结构和低温电输运性质进行测量.实验结果显示,超导氧化物La1.85Sr0.15CuO4颗粒随机分布在聚合物本体中,相互间没有连接构成网络结构.在正常态下,复合材料的电阻-温度变化曲线给出类半导体行为.但对应于超导氧化物La1.85Sr0.15CuO4的超导转变温度Tc处,复合材料的电阻-温度变化曲线出现了极小值.室温下电阻率ρ随外加电场强度E的变化曲线测量结果表明,ρ-E曲线为一线形关系,随着电场强度E增加,电阻率ρ下降.文中对可能存在的导电机制进行分析,结果表明隧道贯穿模型可以很好地解释复合材料的导电机制.另外,外加电场强度E对复合材料的电输运特性有明显的影响.     

陈化温度和Fe/Zr配比对SO42-/Fe2O3-ZrO2固体超强酸结构与性能的影响

用低温陈化法制备了SO42 -/Fe2 O3 ZrO2 (简称SFZ)固体超强酸催化剂 ,用红外光谱 (IR)和X光衍射(XRD)对其结构进行了表征 ,并考察了它对合成癸二酸二正丁酯的催化性能 .IR谱显示 ,低温陈化的SFZ样品在10 70cm-1处吸收峰远强于常温陈化样品 .XRD分析则显示 ,在焙烧温度为 6 5 0℃、Fe/Zr为 2∶1时 ,低温陈化的样品出现了亚稳态的ZrO2 四方晶相 .该样品在催化酯化反应中使产率达 90 %以上 ,高于常温陈化样品的 30 % .研究结果表明 :在其他条件不变时 ,低温陈化所出现的亚稳态的ZrO2 四方晶相是表面酸性和催化活性增加的微观原因