Low-Temperature Growth of Polycrystalline silicon Films by SiCl4／H2 rf Plasma Enhanced Chemical Vapour Deposition

Polycrystalline silicon film was directly fabricated at 200℃ by the conventional plasma enhanced chemical vapour deposition method from SiCl4 with H2 dilution. The crystallization depends strongly on the deposition power.The maximum crystMlinity and the crystalline grain size are over 80% and 200—50Onm, respectively. The results of energy dispersive spectroscopy and infrared spectroscopy measurements demonstrate that the film is mostly composed of silicon, without impurities such as Cl, N, C and bonded H. It is suggested that the crystallization at such a low temperature originates from the effects of chlorine, i.e., in-situ chemical, etching, in-situ chemical cleaning, and the detachment of bonded H.     

α-卤代萘与叔己酮碳负离子在Co(Ⅱ)络合物催化下的自由基链式亲核取代反应产物的薄层色谱定量分析

研究了以Co(Ⅱ)络合物为催化剂,α-卤代萘与叔己酮碳负离子的自由基链式亲核取代反应(SRN1)产物α-萘基叔己酮的薄层色谱扫描定量分析方法;定量分析的线性范围为0～4.4μg,平均回收率99%～101%,异板间相对标准偏差为2.3%,同板相对标准偏差为1.6%.     

绿臭蛙皮中与神经降压肽有关的绿臭蛙降压肽的分离及其化学和生物学特征

本文利用Sep-Pak Cu和反相HPLC从我国产绿臭蛙皮的甲醇提取物中分得一新的神经降压肽类似物:绿臭蛙降压肽。其结构为Asp-Lys-Arg-Pro-Tyr-Ile-Leu-His-Glu。此结构与神经降压肽羧端部分结构相似。但比后者多出残基His-Glu。相应的合成品与天然肽在高效液相色谱、氨基酸分析和生物测定中均表现一致。此肽对大鼠产生降血压效应,但作用比神经降压肽弱。该肽对豚鼠回肠制品有很强的和可重复的收缩活性,这一点又与两栖动物皮肤中另一神经降压肽类似物——xenopsin的相应活性有别。     

离子对高效液相色谱在无机分析中的应用

本文简单回顾了离子对高效液相色谱作为一种先进的分析手段在无机分析领域中的发展历史,并对其特点、保留机理、应用现状和发展前景四个方面作了详细的介绍。     

全气相化学激光体系的直流放电研究

 为了提高化学激光体系(AGIL)中F原子的产率，采用直流放电引发方式，对棒式电极的放电特性进行了研究。在对NF3/He混合气体进行解离时，通过选择不同平衡电阻，得到了3 kW左右的放电注入功率。用光谱分析仪对F原子产率进行了测量。通过拟合计算可得：一个NF3分子能够解离出1.3～1.5个F原子。     

空气中水含量的计算及其在色谱分析中的应用

本文介绍了空气中水含量的计算式并编制了空气中的水含量表。实验证明,表上的数据适用于色谱分析。     

反相液相色谱法测定啤酒花浸膏中的α-酸和β-酸

用反相液相色谱法测定了啤酒花浸膏中α-酸和β-酸含量,以NovapakC18(150 mm×3.9 mm ID,4 μm)为分析柱,甲醇∶水(85∶15,v/v,磷酸调pH=2.5)为流动相,紫外313 nm检测.样品用甲醇溶解过滤后直接进样,外标法定量.α-酸和β-酸的线性范围分别为0.042 5-0.690 mg/mL、0.020-0.32 mg/mL,平均加样回收率分别为98.2%,97.3%,RSD%分别为1.3%、1.2%(n=5),最低检测浓度均为0.001 mg/mL.本法7 min完成一次分析,具有简单、快速、准确等特点.     

Some hydrodynamic aspects of 3-phase inverse fluidized bed

Hydrodynamics of 3-phase inverse fluidized bed is studied experimentally using low density particles for different liquid and gas velocities. The hydrodynamic characteristics studied include pressure drop, minimum liquid and gas fluidization velocities and phase holdups. The minimum liquid fluidization velocity determined using the bed pressure gradient, decreases with increase in gas velocity. The axial profiles of phase holdups shows that the liquid holdup increases along the bed height, whereas the solid holdup decreases down the bed. However, the gas holdup is almost uniform in the bed.