新型水溶性膦铑络合物催化烯烃的氢甲酰化反应研究

新型水溶性膦铑络合物催化烯烃的氢甲酰化反应研究燕远勇，左焕培，金子林（大连理工大学化工学院，大连１１６０１２）关键词烯烃，水溶性膦铑络合催化剂，氢甲酰化，醛．１．前言为克服催化剂的流失和与反应产物的分离困难，近年来均相催化的一个重要进展是开发了以磺化...     

含氨基酸侧链的有机硅高分子催化剂 ⅩⅤ.γ-(L-酪氨酰胺基)丙基硅氧烷钯催化剂的合成加氢活性及其结构表征

本文报导了四种不同N/Pd摩尔比的聚γ-(L-酪氨酰胺基)丙基硅氧烷钯催化剂的合成及其催化加氢活性,这类催化剂与聚γ-((L-酷氨酸)丙基硅氧烷钯催化剂相比较,虽然均具有类似的N→Pd配位的活性中心组成,但它们对底物的加氢活性则明显不同,前者对丙烯腈、丙烯酸、环己烯和1-癸烯的催化活性比后者高,对苯乙烯则相反。N/Pd摩尔比、反应温度、溶剂以及体系的pH值对催化活性的影响,两者的情况大致相同,标题催化剂对衣康酸的催化加氢,产物的光学纯度为30％。     

应用高分子铂络合物催化合成硅烷偶联剂

以二氧化硅为载体的侧链上含有配位基团和-COOH的聚硅氧烷(1-5)分别与氯铂酸反应制备了五种聚硅氧烷-铂络合物(“St-Pt-l”—“St-Pt-5”).这些高分子铂络合物,用于催化环氧丙基烯丙基醚与三甲及基氢硅烷反应具有很高的催化活性,在温和的条件下(80℃,30min),反应以72—98％的产率生成了硅烷偶联剂γ-(2,3-环氧丙氧基)丙基三甲氧基硅烷.通过对含,配位基的高分子铂络合物“Si-Pt-1”的稳定性研究,发现它可以重复使用多次而不降低其催化活性.     

高分子路易斯酸催化剂—阳离子交换树脂四氯化锡复合物

大孔强酸性聚苯乙烯系阳离子交换树脂与SnCl_4在CS_2中反应可生成一种稳定的高分子路易斯酸催化剂.其制备简单、易分离.这种催化剂不怕水,对酯化、缩醛、缩酮、醚化及付氏烷基化反应具有较好的催化作用,且催化性能稳定,至少可重复使用10次.     

C207联醇催化剂的羰基硫中毒研究

以常压甲醇分解反应为基础实验测定了不同羰基硫含量和不同反应温度下甲醇合成铜基催化剂活性随时间的变化。结果表明，羰基硫含量增加时；失活速率增快；反应温度升高时，失活速率也加快。羰基硫中毒前后催化剂样品的ＸＲＤ谱图证实了起催化作用的活性组分为Ｃｕ＾＋／ＺｎＯ。应用改进的高斯－牛顿法对失活实验数据进行参数估值，获得了Ｃ２０７铜基催化剂羰基硫中毒的失活速率方程。     

LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

Storage-Reduction of NOx over Combined Catalysts of Pt/Ba/Al2O3-Mn/Ba/Al2O3： Carbon Monoxide as Reductant

Storage-reduction of NOx by carbon monoxide was investigated over combined catalysts of Mn/Ba/Al2O3-Pt/Ba/Al2O3. Combination of Mn/Ba/Al2O3 and Pt/Ba/Al2O3 catalysts in different ways showed excellent NOx storage-reduction performance and the content of Pt could be reduced by 50%. Not only the addition of 5Mn/15Ba/Al2O3 to lPt/15Ba/Al2O3 could improve its storage ability, but also enhance the NOx conversion consequently. NOx conversion over the combined catalysts (the combined catalysts I and II) was increased under dynamic lean-rich burn conditions, the maximum NOx conversion increased from 69.4% to respectively 78.8% and 75.7% over two combined catalysts.     

BaFeO3-x与Cu-ZSM-5耦合催化剂的NOx储存还原性能

为替代传统的贵金属基NO_x储存还原（NSR）催化剂,本文设计并制备了不含贵金属的BaFeO_3-x+Cu-ZSM-5 耦合催化剂,用于催化消除稀燃发动机尾气中的NO_x. 在稀燃阶段,NO在BaFeO_3-x催化剂上发生了氧化和储存反应;在富燃阶段,从BaFeO_3-x催化剂中脱附出来未能消除的NO_x被置于其后的Cu-ZSM-5催化剂进一步催化消除. 实验结果表明,BaFeO_3-x+Cu-ZSM-5 耦合催化剂的工作温度窗口被拓宽到250-400 ℃,同时NO_x消除性能得到了显著提高：NO_x转化率最高可达98%,N₂选择性接近100%.     

掺铁纳米TiO_2的制备及其光催化性能

以TiC l4为原料,采用微波加热与常规加热2步合成法制备掺铁纳米TiO2。用X射线粉末衍射(XRD)、透射电镜(TEM)、紫外可见吸收光谱(UV-V is)、光电子能谱(XPS)等测试技术对其进行了表征。结果表明,所制得的掺铁纳米TiO2是以锐钛矿为主相的混晶,平均粒径约为10 nm,适量Fe3+的掺杂能促进金红石相变,抑制锐钛矿晶粒的生长,使Ti2p电子结合能升高0.3 eV,并使TiO2吸光能力增强,带边吸收向可见光区移动。在UVA段(320~400 nm)光照下,通过对维生素VB12的光催化降解,发现掺入摩尔分数为0.5%的Fe3+的纳米TiO2能明显提高其光催化活性,使维生素B12的降解速率提高2.3倍。