聚合方法对聚苯胺性能的影响北大核心CSCD

分别通过苯胺的化学氧化以及N,N-二氯对苯醌二亚胺与对二溴苯格氏试剂在Ni(Ⅱ)配合物催化下共聚等两种方法合成了聚苯胺。对两种方法所获得的聚合物通过红外光谱(FT-IR)、紫外可见吸收光谱(UVVis)、循环伏安(CV)、充放电等对聚合物进行了表征和性能测试。结果表明,化学氧化法合成聚苯胺的紫外-可见吸收光谱中,在600nm处出现最大吸收峰,而金属配合物催化法合成的聚合物最大吸收峰出现在443nm。两种聚合物都具有可逆的氧化-还原性能,其氧化峰分别出现在0.26eV和0.49eV处。     

ZIF-67/石墨烯复合物衍生的氮掺杂碳限域Co纳米颗粒用于高效电催化氧还原

燃料电池阴极氧还原(ORR)催化剂目前主要以商业Pt/C为主, 其高成本和稀缺性极大地限制了燃料电池的广泛应用. 为了替代Pt/C催化剂, 廉价高效的非贵金属催化剂目前受到了广泛的研究和关注. 利用氧化石墨烯(GO)为诱导模板, 借助表面丰富的含氧官能团, 实现了Co基金属有机框架材料(MOF) (ZIF-67)在GO表面的原位生长, 构筑了ZIF-67/GO层状复合材料. 热解过程中, 石墨烯的存在有效抑制了Co纳米颗粒的团聚, 并且很好地维持了原始的层状结构. 最终获得的Co@N-C/rGO复合催化剂材料实现了活性位的高度分散, 并且具有丰富的孔结构和优异的导电性能. 在电化学性能测试中Co@N-C/rGO表现出优异的ORR性能, 其起始电位为0.96 V, 半波电位0.83 V, 远优于ZIF-67直接热解得到的Co@N-C材料, 且性能与商业Pt/C催化剂相当. 此外, Co@N-C/rGO复合催化剂还表现出良好的催化稳定性和甲醇耐受性, 显示出该材料作为燃料电池氧还原催化剂的重要潜力.     

高分散Co0.2Ni1.6Fe0.2P助催化剂改性P掺杂g-C3N4纳米片高效光催化析氢的研究

随着化石燃料使用的增加和温室气体排放量持续上升,20世纪以来气温上升得更快。开发环境友好型能源取代传统化石燃料是当务之急。氢能源作为一种清洁、高效的能源,被认为是最有希望取代传统化石燃料的能源。光催化水分解水产氢作为为一种环保型技术被认为是最有前景的氢能生产方法。提高光生电子-空穴对分离效率是构建高效光催化剂的关键。然而,利用高度分散的助催化剂构建高效、稳定的产氢光催化剂仍然是一个挑战。本文首次成功地采用一步原位高温磷化法制备了高度分散的非贵金属三金属过度金属磷化Co_0.2Ni_1.6Fe_0.2P助催化剂(PCNS-CoNiFeP)掺杂P的石墨相氮化碳纳米片(PCNS)。有趣的是,PCNS-CoNiFeP与传统氢氧前驱体磷化法制备的CoNiFeP相比,没有聚集性,分散性高。X射线衍射(XRD)、X射线光电子能谱(XPS)、元素映射图像和高分辨率透射电镜(HRTEM)结果表明,PCNS-CoNiFeP已成功合成。紫外-可见吸收光谱结果表明,PCNS-CoNiFeP在200–800 nm波长范围内较PCNS略有增加。光致发光光谱、电化学阻抗谱(EIS)和光电流分析结果表明,CoNiFeP助催化剂能有效促进光生电子-空穴对的分离,加速载流子的迁移。线性扫描伏安法(LSV)结果还表明,负载CoNiFeP助催化剂可大大降低CNS的过电位。结果表明,以三乙醇胺溶液为牺牲剂的PCNS-CoNiFeP最大产氢速率为1200 μmol·h^-1·g^-1,是纯CNS-Pt (320 μmol·h^-1·g^-1)的4倍。在420 nm处的表观量子效率为1.4%。PCNS-CoNiFeP在光催化反应中也表现出良好的稳定性。透射电镜结果表明,6–8 nm的CoNiFeP高度分散在PCNS表面。高度分散的CoNiFeP比聚集的CoNiFeP具有更好的电荷分离能力和更高的电催化析氢活性。由此可见,聚合的CoNiFeP-PCNs (300 μmol·h^-1·g^-1)的产氢速率远低于PCNS-CoNiFeP。此外,CNS的P掺杂可以改善其电导率和电荷传输。     

铜掺杂钙铝水滑石催化氧化异丙苯制备异丙苯过氧化氢

采用共沉淀法制备了铜掺杂钙铝水滑石Ca₄Cu _x Al-LDHs（x=0,0.1,0.3,0.5,0.8,1.0）,并对其催化异丙苯液相氧化制备异丙苯过氧化氢的活性进行了研究。采用X射线衍射、傅里叶红外光谱、扫描电子显微镜和热分析等手段对Ca₄Cu _x Al-LDHs进行了表征,制备的Ca₄Cu _x Al-LDHs保留了水滑石的片层状结构,铜的掺杂使孔径变小,比表面积增大。当进料比（催化剂/异丙苯）为7.5 mg/mL,反应温度85 ℃,氧气流速为15 mL/min,反应时间7 h,异丙苯的转化率为34.5%,异丙苯过氧化氢的选择性为86.9%,催化剂循环使用5次后,异丙苯的转化率为31.2%,异丙苯过氧化氢的选择性为83.3%。研究为异丙苯过氧化氢开发了新的催化体系。     

Pd nanoparticles on boron doped graphene catalyst for electrochemical detection of hydrogen peroxide prepared by electroless deposition methodEI北大核心CSCD

Taking advantage of large conjugated structure and reductivity of boron-doped graphenethe palladium nanoparticles/boron-doped graphene catalyst was prepared by electroless deposition method using boron-doped graphene as reductant and stabilizer. The average size of palladium nanoparticles highly dispersed on the surface of boron-doped graphene was about 6.5 nm. The electrochemical sensor was prepared by modifying the as-formed catalyst on the surface of glassy carbon electrode. The obtained electrochemical sensor exhibited an excellent electrochemical catalytic activity for H2 O2 . It exhibited high sensitivity with the detection limit as low as 830 nmol/L and good linearity in the range of 2.5-300 μµmol/L for detection of H2 O2 . It could be utilized for the determination of H2 O2 in milk samples. © 2022, Youke Publishing Co.,Ltd. All rights reserved.     

表面限域掺杂提升高比能正极材料稳定性

Lithium ion batteries (LIBs) have broad applications in a wide variety of a fields pertaining to energy storage devices. In line with the increasing demand in emerging areas such as long-range electric vehicles and smart grids, there is a continuous effort to achieve high energy by maximizing the reversible capacity of electrode materials, particularly cathode materials. However, in recent years, with the continuous enhancement of battery energy density, safety issues have increasingly attracted the attention of researchers, becoming a non-negligible factor in determining whether the electric vehicle industry has a foothold. The key issue in the development of battery systems with high specific energies is the intrinsic instability of the cathode, with the accompanying question of safety. The failure mechanism and stability of high-specific-capacity cathode materials for the next generation of LIBs, including nickel-rich cathodes, high-voltage spinel cathodes, and lithium-rich layered cathodes, have attracted extensive research attention. Systematic studies related to the intrinsic physical and chemical properties of different cathodes are crucial to elucidate the instability mechanisms of positive active materials. Factors that these studies must address include the stability under extended electrochemical cycles with respect to dissolution of metal ions in LiPF₆-based electrolytes due to HF corrosion of the electrode; cation mixing due to the similarity in radius between Li⁺ and Ni²⁺; oxygen evolution when the cathode is charged to a high voltage; the origin of cracks generated during repeated charge/discharge processes arising from the anisotropy of the cell parameters; and electrolyte decomposition when traces of water are present. Regulating the surface nanostructure and bulk crystal lattice of electrode materials is an effective way to meet the demand for cathode materials with high energy density and outstanding stability. Surface modification treatment of positive active materials can slow side reactions and the loss of active material, thereby extending the life of the cathode material and improving the safety of the battery. This review is targeted at the failure mechanisms related to the electrochemical cycle, and a synthetic strategy to ameliorate the properties of cathode surface locations, with the electrochemical performance optimized by accurate surface control. From the perspective of the main stability and safety issues of high-energy cathode materials during the electrochemical cycle, a detailed discussion is presented on the current understanding of the mechanism of performance failure. It is crucial to seek out favorable strategies in response to the failures. Considering the surface structure of the cathode in relation to the stability issue, a newly developed protocol, known as surface-localized doping, which can exist in different states to modify the surface properties of high-energy cathodes, is discussed as a means of ensuring significantly improved stability and safety. Finally, we envision the future challenges and possible research directions related to the stability control of next-generation high-energy cathode materials.     

CoMn@NC催化5-羟甲基糠醛常压氧化为2, 5-呋喃二甲酸二甲酯

2, 5-呋喃二甲酸二甲酯(DMFDCA)这一生物质衍生的增值化学品是石油基聚合物单体对苯二甲酸(TPA)的理想替代品。本研究采用一步共热解法合成了两种廉价金属修饰的氮掺杂多孔碳催化剂CoMn@NC,并将其用于5-羟甲基糠醛(HMF)在温和条件下的需氧氧化。由Co₃Mn₂@NC-800催化HMF在50 ℃和常压氧气的条件下反应12 h后,得到产率为85%的DMFDCA。多孔催化剂的高比表面积提高了传质效率。Co纳米粒子(NPs)和呈原子级分散的Mn与掺杂在碳中的氮配位形成M―N_x。富含吡啶氮的碳基体中的缺电子金属位点有利于HMF和氧的活化。氧形成的超氧自由基阴离子的存在确保了半缩醛中间体和5-(羟基甲基)-2-糠酸甲酯(HMMF)的羟甲基的脱氢氧化,从而高选择性得到DMFDCA。该催化剂性能稳定,可适用于各种取代芳醇。该催化体系具有用于生产聚合物单体羧基酯的应用潜力。     

Ru掺杂对Fe催化剂上酚类化合物加氢脱氧影响的密度泛函理论研究北大核心CSCD

采用密度泛函理论(DFT)计算研究了苯酚、邻甲酚、愈创木酚在不同结构Ru-Fe(211)表面上吸附活化性能和加氢脱氧反应路径.结果表明,Ru掺杂能促进H2分子在Fe(211)表面上解离,提高加氢脱氧反应速率.酚类在1Ru_(ads)-Fe(211)表面上吸附比在1Ru_(sub)-Fe(211)表面上更稳定,苯酚和邻甲酚脱羟基步骤能垒分别降低0.13和0.28 eV,有利于生成芳烃.愈创木酚在1Ru_(sub)-Fe(211)表面上加氢脱氧优势路径是先脱甲氧基生成苯酚,苯酚再加氢脱氧生成产物苯(速控步骤能垒1.16 eV);而在1Ru_(ads)-Fe(211)表面上愈创木酚先脱羟基再脱甲基生成苯酚的路径更具有动力学优势(速控步骤能垒1.21 eV).计算结果表明Ru掺杂方式影响Fe催化剂对酚反应分子的吸附稳定性以及加氢脱氧反应路径和性能.与1Ru掺杂Fe(211)催化剂相比,增加Ru原子数形成4Ru_(ads)-Fe(211),能够进一步提高酚类反应物的吸附强度,但导致加氢脱氧反应能垒升高.因此,在Fe催化剂上以表面吸附的形式掺杂少量贵金属Ru更利于酚类加氢脱氧生成芳烃.     

双金属MOFs及其衍生物在电化学储能领域中的应用

双金属有机骨架及其衍生物一方面具有单金属有机骨架孔道丰富、比表面积大、结构可调、活性位点丰富等特点,另一方面具有双组分与多孔结构之间的协同效应,因而受到了研究人员的密切关注,在储能、催化、分离、传感器、医药、气体存储等领域广泛应用。和单金属MOFs类似,双金属MOFs的导电性不佳、结构易坍塌,这极大地限制了其在电化学储能中的应用。通过对双金属MOFs进行热处理,易得到分布均匀的多孔碳@双金属氧化物/硫化物/磷化物/硒化物等衍生物,不仅保持了独特的多孔结构,而且提高了材料的导电性和结构稳定性,有利于在电化学储能中的应用。因此,本文从双金属MOFs中的主要金属离子入手,综述了双金属MOFs及其衍生物用于超级电容器、锂离子电池、钠离子电池、金属空气电池等电化学储能器件的最新应用进展。在此基础上,总结了双金属MOFs在电化学储能应用中的优势,并对其制备、作用机理和后处理研究提出了建议。