Self-assembly behavior of copolymers with super segregated structure containing fluorinated segments

Copolymers with super segregated structure of hydrophilic methoxy poly（ethylene glycol） （mPEG） and fluorophilic poly（1H,1H,2H,2H-perfluorodecyl acrylate） （PFA） were prepared. And just because of this super segregated structure which was resulted from the extremely strong incompatibility between the two blocks, several interesting self- assembly behaviors of the copolymers were displayed and studied under different conditions. Transmission electron microscope （TEM） showed that with the increase of PFA in the polymerization system, the incompatibility in this super segregated structure became stronger, and the self-assembly behavior changed from ball-like or rod-like to vesicles, and finally collapsed to sheet-like. The self-assembly behavior changed likewise when the initial concentration increased. And the interesting formation of these barrel-like and spindle-like vesicles was finally studied with different cooling speeds. It＇s finally found that with this super segregation structure, these new self-assembly morphology might be formed due to the extremely strong incompatibility between mPEG and PFA segments.     

Ethylene polymerization with novel phenoxy-imine catalysts bearing 4-vinylphenyl group

This contribution reports ethylene polymerization behavior of titanium complexes incorporating bis(phenoxyimine) ligands. Six phenoxy-imine Ti(IV) complexes {6-R1-2-[CH=N(2,6-difluoro-3,5-diR2-4-R3Ph)]C6H3O}2TiCl2(1: R1 = H, R2 = H, R3 = H; 2: R1 = H, R2 = H, R3 = 4-vinylphenyl; 3: R1 = CH3, R2 = H, R3 = H; 4: R1 = CH3, R2 = H, R3 = 4-vinylphenyl; 5: R1 = CH3, R2 = F, R3 = H; 6: R1 = CH3, R2 = F, R3 = 4-vinylphenyl) have been synthesized and evaluated for ethylene polymerization using dried MAO(simplified as DMAO) as cocatalyst. An obvious catalytic heterogeneity of Cat 2(Complex 2/DMAO) towards ethylene polymerization was observed, which was illustrated by decreased activity, multimodal molecular weight distribution and partially improved particle morphology comparing with Cat 1. Moreover, Cat 3 exhibits "living" characteristics in the process under certain conditions(25 °C, less than 20 min). Otherwise, the moderate to high ethylene polymerization activity of ca. 105-106 g PE/(mol Ti·h) and high molecular weight(Mw = 105-106) of polyethylene can be obtained by changing the skeleton structure of these complexes.     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

Biodegradable thermogel as culture matrix of bone marrow mesenchymal stem cells for potential cartilage tissue engineering

Poly（lactide-co-glycolide）-poly（ethylene glycol）-poly（lactide-co-glycolide）（PLGA-PEG-PLGA） triblock copolymer was synthesized through the ring-opening polymerization of LA and GA with PEG as macroinitiator and stannous octoate as catalyst. The amphiphilic copolymer self-assembled into micelles in aqueous solutions, and formed hydrogels as the increase of temperature at relatively high concentrations（〉 15 wt%）. The favorable degradability of the hydrogel was confirmed by in vitro and in vivo degradation experiments. The good cellular and tissular compatibilities of the thermogel were demonstrated. The excellent adhesion and proliferation of bone marrow mesenchymal stem cells endowed PLGA-PEGPLGA thermogelling hydrogel with fascinating prospect for cartilage tissue engineering.     

pH-Sensitive Wettability Induced by Topologicaland Chemical Transition on the Self AssembledSurface of Block Copolymer简

pH-sensitive wettability of polystyrene-b-poly（4-vinylpyridine） （PS-b-P4VP） self assembled films, exhibiting superoleophobicity under water and hydrophilicity at low pH value, and oleophobicity under water and hydrophobicity at neutral condition, has been realized. The wettability properties resulted from the surface topological and chemical transition, which were confirmed by in situ AFM measurements under water at different pH. At low pH, P4VP chains, which were confined in the hexagonal-packed nanodomains, got protonated into a swollen state, while at high pH, P4VP chains were deprotonated into a collapsed state. The reversible protonation/deprotonation procedure on the molecular scale leads to surface topological and chemical transition, thereby pH-sensitive wettability.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

Synthesis of Star-like Polybutadienes by a Combination of Living Anionic Polymerization and “Click” Coupling Method

Three-arm and four-arm star-like polybutadienes(PBds) were synthesized via the combination of living anionic polymerization and the click coupling method. Kinetic study showed that the click reaction between the azido group terminated PBd-t-N3 and the alkyne-containing multifunctional linking reagent was fast and highly efficient. All coupling reactions were fully accomplished within 40 min at 50 °C in toluene in the presence of the reducing agent Cu(0), proven by 1H-NMR, FTIR and GPC measurements. For the coupling reactions between the PBd-t-N3 polymer and dialkyne-containing compound, the final conversion of the coupled PBd-PBd polymer was ca. 97.0%. When a PBd-t-N3 polymer was reacted with trialkyne-containing or tetraalkyne-containing compound, the conversion of three-arm or four-arm PBd was around 95.5% or 87.0%, respectively. Several factors influencing the coupling efficiency were studied, including the molecular weight of the initial PBd-t-N3, arm numbers and the molar ratio of the azido group to the alkynyl group. The results indicated that the conversion of the target products would be promoted when the molecular weight of the PBd-t-N3 was low and the molar ratio of the azido to alkynyl groups was close to 1.     

聚氨酯/碳纳米管复合材料制备的研究进展

综述了聚氨酯/碳纳米管复合材料制备研究中碳纳米管的修饰方法及其复合材料的制备方法。碳纳米管的修饰方法包括共价修饰和非共价修饰,两种方法都可以有效改善碳纳米管在聚氨酯中的分散性。然而,共价修饰法会削弱碳纳米管的强度,非共价修饰层则容易脱落。因此,人们发展出了复合修饰法。该复合材料中的制备方法包括溶液共混法、熔融混合法和原位聚合法。评述了未来的发展趋势,提出朝简单、环保的方向改进碳纳米管的修饰方法,形成系统化的碳纳米管分散性评价的量化标准,发展出适应复合材料工业化生产线的制备方法,将是今后研究的重点。     

聚己内酯接枝淀粉纳米晶的制备

通过异氰酸酯与端羟基聚己内酯反应制备端异氰酸酯基预聚体,再接枝到淀粉纳米晶表面,制备了端基分子量可控的聚己内酯接枝淀粉纳米晶。分别用FTIR和1H NMR对所制备的聚己内酯接枝淀粉纳米晶进行表征,结果表明,有少量聚己内酯接枝到淀粉纳米晶表面。XRD结果表明,接枝了少量聚己内酯后的淀粉纳米晶的晶型和结晶度与未接枝的淀粉纳米晶基本一致。聚己内酯接枝淀粉纳米晶的熔融温度由115℃左右提高到122℃左右,并且温度范围变宽。浸润性实验表明,聚己内酯接枝淀粉纳米晶与水不浸润,其表面已具有疏水性。聚己内酯仅接枝在淀粉纳米晶的表面,改善了淀粉纳米晶表面的疏水性能和与聚酯类聚合物的界面相容性。聚己内酯接枝淀粉纳米晶有望用于可降解聚酯类高分子材料,如聚乳酸(PLA)、聚己内酯(PCL)、聚丁二酸丁二醇酯(PBS)等,改善其力学性能和生物降解性能等。     

锰催化的C?C键生成反应研究进展

迄今为止,贵金属(铑、钯、钌等)在过渡金属催化的碳碳键生成反应中发挥着主导作用,然而使用廉价金属催化剂更符合可持续发展的要求。锰是地壳中含量排第三位的过渡金属,价格便宜,环境危害性小,有潜力成为贵金属催化剂的替代品并发挥其自身独特的反应性。尽管锰参与的当量反应有大量文献报道,目前锰催化的反应尤其是碳碳键生成反应的发展还不成熟,如何实现高效的催化循环是锰催化领域面临的主要难题之一。本文对锰催化的付-克烷基化反应、格氏试剂的酰化反应、偶联反应、碳金属化反应、自由基反应和碳氢键活化反应进行了综述。