Ω型分子筛脱铝的核磁共振研究

在不同投料比（ＳｉＯ２／Ａｌ２Ｏ３＝１３．８，１９及２１）条件下，合成了三种Ω型分子筛原粉．对投料比为１３．８的原粉样品进行了四种不同方式的脱铝处理，即水热、ＳｉＣｌ４、ＥＤＴＡ和（ＮＨ４）２ＳｉＦ６处理，而形成了系列脱铝Ω型分子筛样品．对原粉及其脱铝样品进行了２９Ｓｉ和２７ＡｌＭＡＳＮＭＲ测试，确定出样品骨架硅铝比和铝在两种晶体学不等价Ｔ位上的占据比率，以探索四种脱铝方法的效果．实验结果与分析表明：在所有样品中，铝原子的占据具有择优Ｂ位的倾向；且铝在ＴＡ与ＴＢ位上的占据比率与合成条件有关；四种处理方式对Ω型分子筛的脱铝效果不尽相同．     

膦化聚2,6—二甲基1,4—苯醚负载钯催化剂的表征及其催化性能

报道了四种不同P/Pd摩尔比的膦化聚2,6-二甲基1,4-苯醚负载把催化剂的加氢和异构化性能;通过XPS、电镜和远红外对催化剂进行了表征;并考察了溶剂和温度对催化剂活性的影响.     

探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

高分子钯络合物催化的亚胺化合物的加氢反应

制备了一系列以二氧化硅为载体的侧链上含有各种氮配位基团的聚硅氧烷-钯络合物,这些高分子钯络合物能够在常温常压下催化亚胺化合物的加氢反应并表现出不同程度的催化活性.对其中聚-(N,N-二乙酰基)-γ-氨丙基硅氧烷-钯络合物催化的亚苄基苯胺的加氢反应做了比较深入的研究,发现该催化剂在反应中是稳定的并给出唯一的加氢产物,络合物中的N/Pd原子比、反应温度以及不同底物对反应速度的影响也被报道.     

煤中氯在亚临界水条件下的变迁

运用半连续反应装置对山西吴家坪煤和四川华蓥山煤中氯在亚临界水条件下的脱除规律及形态变化进行了研究。考察了反应温度和压力对氯脱除率的影响；同时还运用化学提取法对原煤及残渣中氯的形态进行了研究。研究结果表明,随着反应温度的升高，煤中氯的脱除率也增加，在410℃、15MPa、60min、水流量为580mL/h时，吴家坪煤中氯的脱除率为84.6%，华蓥山煤中氯的脱除率为72.4%。吴家坪煤中氯在15MPa时的脱除率最大。华蓥山煤中氯主要以有机氯的形态存在，而吴家坪煤中氯有8%为离子可交换态的无机氯，其余为有机结合的氯；在亚临界水萃取煤的过程中，离子交换态结合的有机氯比共价键结合的有机氯更容易挥发,有机氯要首先转化为无机氯然后再逸出。     

Highly Efficient One-Pot Synthesis of 2-Arylmethyl N-Substituted Anilines via Yb（OTf）3 Catalyzed Three-Component Reaction

An efficient method has been developed for one-pot three-component coupling reactions of various aldehydes, 1-cyclohexen-2-one, and primary or secondary amines in the presence of a catalytic amount of Yb（OTf）3 under mild conditions to afford the corresponding 2-arylmethyl N-substituted anilines in good yields. In addition, the catalyst was easily recovered and could be reused for at least four cycles without any loss of activity.     

糠酸一步催化法制备四氢糠酸甲酯

以糠酸、甲醇、氢气为原料,采用连续流动固定床微反应器,Pd-Ni/γ-Al2O3为催化剂,使糠酸一步加氢甲酯化生成α-四氢糠酸甲酯.研究了反应的温度,压力,气、液体流速,进料流量等因素对催化反应的影响.结果表明:在1.5MPa,250℃,氢气空速3300 h-1,液体空速3.0 h-1(氢油比为50)时,糠酸转化率为96.6%,四氢糠酸甲酯的选择性97.2.0%,产率94.0%.催化剂稳定性较好,连续运转280小时后未见活性下降.该反应体系活性高,选择性好,反应压力低,催化剂性能稳定,操作简单,产物易分离.     

微波干法催化芳香醛与绕丹宁及N-苯基绕丹宁的缩合反应

利用微波辐射和固体碱性载体试剂催化绕丹宁及N-苯基绕丹宁和芳香醛的缩合反应合成了14个绕丹宁衍生物并研究了影响反应的因素。     

聚苯乙烯邻氨基苯甲酸负载钯催化剂的加氢性能研究

含有双配位基的聚苯乙烯邻氨基苯甲酸与钯络合物反应制得螫合的配位高分子钯催化剂。用甲醇-水(pH=12)还原可得晶粒分布均匀的胶态钯催化剂,它们对烯烃的加氢具有良好的催化作用。研究表明,钯络合物上原有配体的给予性常数(E_n)与负载后络合催化剂的加氢活性具有良好的线性关系,金属粒径为40—50A的催化剂对己烯-1的加氢活性最高。本文还研究了溶剂极性,载体孔结构及底物对催化剂活性的影响。