阵列波导光栅解调系统光电集成中Si纳米线AWG的设计

设计了一种阵列波导光栅解调集成系统中的8通道Si纳米线阵列波导光栅波分复用器。根据材料的折射率设计了单模波导截面尺寸,利用光束传播法对所设计阵列波导光栅进行了模拟。结果表明,器件尺寸为200μm×219μm,远小于目前技术较成熟的硅基SiO2的尺寸,光功率分布符合高斯分布,信道间隔为1.8nm,串扰小于-21dB。对小尺寸AWG的设计具有参考意义。     

山西大学成功实现费米气体量子简并

山西大学量子光学与光量子器件国家重点实验室长期以来开展冷原子方面的实验研究,已建立了腔QED、冷原子的EIT、冷原子光缔合产生冷分子、玻色费米混合气体冷却等实验平台。该实验室张靖教授带领的研究小组继7月7日成功实现了铷原子的玻色-爱因斯坦凝聚(BEC)之后,8月30日又成功     

Ф3英寸双面超导薄膜Jc均匀性测量

临界电流密度Jc是评价超导薄膜质量的重要参数之一，采用Jc测量装置可以准确、快速、无损检测Ф2～3英寸双面膜的Jc均匀性。该装置是利用高温超导薄膜的超导转变对线圈内感应电压产生的变化这一原理，测量线圈由初级和次级组成，所用信号频率为20kHz，次级信号在同样频率下由锁相放大器检测，测量过程全部由计算机控制，对于超导微波滤波器应用所要求的高质量Ф2～3英寸双面超导薄膜材料，必须具有高的Jc和低的Rs值，采用该装置测量超导薄膜的Jc均匀性，与Rs对应关系进行分析，将有助于超导薄膜的质量控制。     

微通道板及其发展趋势

回顾微通道板发展历史及各阶段的主要技术特征。综述自90年代以来国内外微通道板的研发和生产情况．     

A New Kind of Buffer Layer of TiO2 Self—Assembled Material in Organic Electroluminescent Devices

A new kind of TiO2 self-assembled nanometre material has been fabricated and is used as a hole-injecting buffer layer in organic electroluminescent devices.The luminance and the efficiency of a devicy individually rises from 1500cd/m^2 to 5000cd/m^2 and from 2.0cd/.A to 3.92cd/A at the current density of 100mA/cm^2.The enhancements in brightness and efficiency are attributed to an improved balance of hole and electron injections due to blocking of the injected holes by the buffer layer and a more homogeneous adhesion of the hloe transprting layer to the anode.     

High—Efficiency Organic Double—Quantum—Well Light—Emitting Devices Using 5,6,11,12—Tetraphenylnaphthacene Sub—monolayer as Potential Well

The double-quantum-well organic light-emitting devices of indium-tin-oxide (ITO)/NPB (50nm)/rubrene (0.05nm)/NPB (4nm)/rubrene (0.05nm)/Alq3 (50nm)/LiF (0.5nm)/Al were fabricated, in which N,N-bis-(1-naphthyl)-N,N‘-diphenyl-1,1‘-biphenyl-4,4‘‘‘‘‘‘‘‘-diamine (NPB) is used as a barrier potential or hole transport layer, tris (8-hydroxyquinoline) aluminium (Alq3) used as electron transport layer, and 5,6,11,12-tetraphenylnaphthacene (rubrene) as a potential well and emitter. The brightness can reach 18610cd/m^2 at 13V. The maximum electroluminescent efficiency of the device was 6.61cd/A at 7V, which was higher than that of common dope-type devices. In addition, the electroluminescence efficiency is relatively independent of the drive voltage in the range from 5 to 13V.     

基于ispPAC的精密放大器的设计

本文介绍了可编程模拟器件的功能特点，列举了利用可编程模拟器件设计精密放大器的方法。     

具有存储功能的衍射图像光刻系统的研制

研制了一种在衍射光变图像器件上进行信息存储的新型数字化激光光刻系统。采用空间光调制器作图形自动输入,双远心投影成像系统在光刻记录面上缩微图形。通过光栅干涉光学头对记录面上的微图形进行干涉调制,使微图形上产生干涉条纹,条纹空间频率范围为500-1200lp／mm。在光刻胶干版上的存储实验表明,在衍射光变图像上的单角度存储信息密度大于3．7Mbit／cm^2。改变干涉条纹取向、条纹间隔和需要存储的图形,光刻系统可实现信息的旋转复用存储。上述光刻系统将会在防伪和衍射光变图像器件制造领域有良好应用。     

A meshless model for transient heat conduction analyses of 3D axisymmetric functionally graded solids

A meshless numerical model is developed for analyzing transient heat conductions in three-dimensional （3D） axisymmetric continuously nonhomogeneous functionally graded materials （FGMs）. Axial symmetry of geometry and boundary conditions reduces the original 3D initial-boundary value problem into a two-dimensional （2D） problem. Local weak forms are derived for small polygonal sub-domains which surround nodal points distributed over the cross section. In order to simplify the treatment of the essential boundary conditions, spatial variations of the temperature and heat flux at discrete time instants are interpolated by the natural neighbor interpolation. Moreover, the using of three-node triangular finite element method （FEM） shape functions as test functions reduces the orders of integrands involved in domain integrals. The semi-discrete heat conduction equation is solved numerically with the traditional two-point difference technique in the time domain. Two numerical examples are investigated and excellent results are obtained, demonstrating the potential application of the proposed approach.