A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

α-Al2O3纳米粒子对Co-Ni合金异常共沉积电化学行为的影响

为了研究在电化学复合共沉积过程中,惰性纳米粒子和金属离子、电极表面的相互作用,以及由此产生的对合金电化学共沉积行为的影响.本文从两个吸附过程出发: 电解液中的金属离子和H＋在纳米粒子表面的吸附；纳米粒子迁移到阴极表面,在电极表面的吸附.采用Zeta电势和稳态极化以及电化学交流阻抗（EIS）研究了纳米Al2O3粒子和电解液中的金属离子，和电极表面的相互作用,进而分析了纳米粒子对Co2＋和Ni2＋还原沉积的影响规律.通过对阻抗数据的拟合,讨论了Al2O3纳米粒子对等效电路中各物理参数的影响.在H＋和不同金属离子在纳米粒子上发生竞争吸附的基础上,提出了纳米粒子和合金共沉积的可能反应历程.     

一种纳米TiO2粉体防团聚的新方法

开发了一种新的低成本防团聚方法——泡沫悬浮法。对泡沫悬浮法和共沸蒸馏法的防团聚效果进行了系统比较。结果表明，泡沫悬浮法可以有效抑制煅烧过程中纳米TiO₂晶粒的粗化和一次粒径的长大。泡沫悬浮法所得纳米TiO₂的粉体还具有团聚粒径小、粒度分布窄以及比表面积大的优点。通过FTIR、TG、DTA和松装密度实验对泡沫悬浮法的防团聚机理进行了研究，提出了纳米TiO₂防团聚模型。     

Li＋-CaxPb1－xTiO3湿敏纳米薄膜的激光拉曼光谱、晶格畸变和激光显微组织——应用“软模理论”解谱

测定了标题物Li^＋-Ca_xPb_1－xTiO₃ (缩写为Li-CPT, 其中x＝0.35, Li/Ti＝1.0%, mol/mol, 850 ℃/h)的激光拉曼光谱(LRS)和激光显微组织, 并与湿敏性能极差的纯钛酸铅PbTiO₃ (缩写为PT)以及不同钙掺杂量的钛酸铅Ca_xPb_1－xTiO₃ (缩写为CPT, x＝0.08, 0.16, 0.24, 0.32, 0.40)的LRS进行比较, Li-CPT以及CPT的LRS与PT的LRS相比有很大差别,仅在75, 125, 190, 273和585 cm^－1出现五个谱峰. 应用“软模理论”将其分别归属于PT四方晶相的五个特征单模E(1TO), A₁(1TO), E(2TO), B₁＋E和A₁(3TO)的红移及宽化, PT的其它五个特征单模在Li-CPT及CPT的谱图中完全消失或被淹没. 对于这种拉曼活性的降低, 可以根据“软模理论”与晶格畸变作用的关联加以解释. Pauling离子半径较小的Ca^2＋的掺杂, 等价取代了半径较大的Pb^2＋的晶格位置, 降低了四方晶相畸变度δ＝c/a和不对称性导致的各向异性, 不单消除了薄膜冷却时位移型相变可能引起的破裂, 而且改变了晶格中氧八面体“TiO₆”及十二面体“PbO₁₂”的几何结构和电荷分布, 改变了晶格c轴上M-O (M＝Ti, Pb)键的化学环境, 直接阻尼了M—O键的伸缩振动软模, 减小了电偶矩及其自发极化, 使Li-CPT的振动模的拉曼活性大大降低, 因此LRS提供了一种表征晶格畸变的有效方法, 反过来也佐证了“软模理论”可以用来解释拉曼光谱.     

用双表面活性剂为共模板合成中孔分子筛MCM-48

利用水热法以非离子表面活性剂聚乙二醇辛基苯基醚和阳离子表面活性剂十六烷基三甲基溴化铵为共模板合成了中孔分子筛MCM-48.实验中发现利用较强的范德华力和氢键,聚乙二醇辛基苯基醚可在很大程度上降低合成MCM-48所需阳离子表面活性剂的用量,且利于制备有序性好、骨架聚合度高、稳定性好的MCM-48.通过调节聚乙二醇辛基苯基醚与十六烷基三甲基溴化铵的比例,可得到不同物相结构的分子筛.     

纳米分辨率的三维形貌检测仪

从光干涉方式，瞳窗关系和光源带宽等基本关系出发，利用空间不变系统理论解析了相移显微干涉检测系统中衍射效应的影响。为了减小横向分辨率对纵向分辨率的影响，利用相关信息提取或数字滤波的方法，获得了纳米分辨率的三维形貌。     

双亲嵌段聚合物的合成与应用

本文介绍了双亲嵌段聚合物的合成方法，包括共溶剂法、聚合后功能化法、胶束聚合法、自由基界面聚合法等，以及双亲嵌段聚合物在乳液聚合、三次采油、医用高分子材料等方面的应用。     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

酚醛型氰酸酯与双酚A型环氧共固化反应的FTIR研究

在恒温固化条件下,通过FTIR跟踪方法,研究了酚醛型氰酸酯与双酚A型环氧共固化反应的路径及其反应机理.共固化体系的反应过程包括在150℃及其以下温度,主要发生的是氰酸酯的三嗪环化固化反应,其中三嗪环化固化反应由于环氧的加入,反应速率被极大地提高了;同时,酚醛型氰酸酯中的氨基甲酸酯类杂质与环氧发生开环聚合反应,引起环氧官能团产生弱而持续的消耗.但在此阶段,酚醛型氰酸酯与环氧之间没有化学反应发生;在180℃及其以上温度,三嗪环和环氧发生反应,异构为异氰脲酸环结构,并进一步反应生成唑啉酮环结构,由于该反应的发生,促进了环氧官能团的消耗速度,在环氧官能团的转化率-时间图中,出现倒S曲线;在三嗪环的转化率图中,出现一个极大值后再降落的曲线.反应温度的提高有利于促进酚醛型氰酸酯与环氧之间的共固化反应,特别是当反应温度为220℃时,氰酸酯官能团和环氧官能团的消耗、三嗪环和唑啉酮环的生成均以较快的速率进行,—OCN生成三嗪环的转化率可以较容易地达到1,而唑啉酮环的转化率不超过0.5.     

四氮大环-金属配合物与DNA作用的电化学及谱学研究

Mononuclear copper（Ⅱ）, nickel（Ⅱ） and cobalt（Ⅲ） tetracoordinate macrocyclic complexes were synthesized and spectroscopically characterized. The crystal structure of the three compounds were determined by X-ray crystallography. The electrochemical experimental results indicate that the three complexes could interact with DNA mainly by electrostatic interaction. The interaction of tetracoordinate macrocyclic cobalt（Ⅲ） complex with DNA was studied by cyclic voltammetry and UV-vis spectroscopy. The experimental results reveal that tetracoordinate macrocyc- lic cobalt（Ⅲ） complex could interact with DNA by electrostatic interaction to form a 1 ： 1 DNA association complex with a binding constant of 7.50 ×10^3 L·mol^-1.