用模糊综合评价值作为单纯形优化指标

本文介绍了一个模糊综合评价方法,讨论了模糊运算方法对运算结果即综合评价值的影响,并将模糊综合评价值用作单纯形优化指标。     

催化动力学光度法测定痕量铜的研究

本研究了在氨水介质中铜（Ⅱ）催化过氧化氢氧化亮黄的褪色反应及其动力学条件，建立了一种超高灵敏、高选择性的测定环境试样中痕量铜的新方法，可测定０．００４～０．５μｇ／２５ｍＬ范围内的铜（Ⅱ）。     

具有C2对称轴的手性配体及其不对称催化反应

按配位原子的数目进行分类，综述了近年来研究较多的具有Ｃ２对称轴的手性配体及其相关的不对称催化反应，并对该类手性配体的设计做了分析和总结。参考文献７９篇。     

基于企业微信平台和在线教育综合平台的线上教学实践

In order to achieve "postponement of school without suspension of learning" during the prevention and control of new coronavirus pneumonia, the online teaching strategy was constructed based on Enterprise WeChat and Integrated Online Education Platform for the online teaching of Separation Science and Technology. The student-centered teaching methods were applied in online teaching process.     

胍催化邻苯二甲酰亚胺对环氧化合物的开环反应

作为有机强碱,胍类化合物可用于催化多种反应[1 5],并且反应可以在均相、无水条件下进行,不需要相转移催化剂。本文探讨用胍催化邻苯二甲酰亚胺对环氧化合物进行开环。用三光气将二乙胺转变为四乙基脲1,后者用五氯化磷和叔丁胺处理得到1,1,3,3 四乙基 2 叔丁基胍2。用2催化邻苯二甲酰亚胺与末端环氧化合物的反应,实现了环氧化合物的区域选择性开环。合成路线如下:1　实验部分1 1仪器与试剂WC 1型显微熔点仪(四川大学科仪厂),温度计未校正;Carlo ErbaModel1110自动元素分析仪,Varian400MHz核磁共振仪。溶剂和试剂经干燥、重蒸后使用…     

均相催化反应在任一给定形状微电极上的稳态电化学行为

根据反应层的概念对在任一给定形状微电极上进行的准一级和二级均相催化反应机理(EC'')的稳态电化学行为进行了研究。本方法简便易行,不需要解复杂方程的数学技巧。利用推导出的这些方程,可计算准一级和二级均相催化反应的动力学常数。     

ArCCo~3(CO)~9~-~nL~n的化学ETC合成及其电化学研究

利用由化学还原剂BPK引发的电子迁移催化反应(ETC)合成了两个系列八种新的三核钴簇合物p-RC_6H_4CCo_3(CO)_(9-n)L_n(L=PPh_3,n=1;L=P(OEt)_3,n=2)。用m.p.、元素分析、IR及~1H NMR对簇合物进行了表征。对簇合物在Pt电极上的循环伏安(CV)研究表明,p-RC_6H_4CCo_3(CO)_9及PPh_3单取代物在室温下均经历一个可逆的单电子过程。p-RC_6H_4CCo_3(CO)_9的E_(1/2)与R的σ_m的线性关系表明R通过诱导效应影响簇合物的氧化还原性。取代簇合物的还原电势相对于母体簇合物的负移表明P的配位增大了CCo_3上的电荷密度,导致簇合物难被还原。     

荧光黄的示波极谱特性研究及其在催化反应-示波极谱分析中的应用

在pH4.9HOAc-NaOAc缓冲溶液中, 荧光黄于-0.50V(vs.SCE)产生一灵敏的单扫描示波极谱波。在100℃弱碱性介质中, 铱(IV)对KIO~4氧化荧光黄这一反应具有强烈催化作用。本文研究了荧光黄的示波极谱行为及利用该催化反应测定痕量铱的各种影响因素,拟定了铱的催化反应-示波极谱分析新方法, 它们的检出限和测定范围分别为0.04ng/mL和0.08-8.0ng/mL。     

Phenylsulfonic Acid Functionalized Mesoporous Silica Catalyzed Transetherification of Alcohols with Dimethoxymethane

Phenylsulfonic acid functionalized mesoporous silica was synthesized by condensation of tetraethylorthosilicate with phenyltrimethoxysilane, and then sulfonation using 30% fuming sulfuric acid. The material was characterized using FT‐IR, DSC, XPS, TEM and N2 adsorption/desorption measurements. DSC revealed that sulfonic acid group of the catalyst was decomposed at 354.8°C, indicating that the catalyst exhibited high thermal stability. XPS showed that there existed three kinds of different silicon species on surface of the catalyst. The catalytic performance of the catalyst was evaluated using transetherification of alcohols with dimethoxymethane. It was found that among primary alcohols, the selectivities of the two long‐chain alcohols for n‐dedocanol and n‐tetradecyl alcohol were higher than 97.0% at the conversions of 43.6% and 65.3%, respectively, while the selectivities of the short‐chain alcohols except for n‐hexanol were less than 90.0% at the conversions of over 80.0%. Due to steric barrier, the secondary alcohols such as iso‐butanol and cyclohexanol afforded conversions of 79.4% and 60.5%, and the selectivities of the two alcohols were more than 90.0%. The sequence in conversion of the substituted phenols is as follows: p‐nitrophenol>p‐fluorophenol≥p‐bromophenol>p‐cresol>m‐cresol.