Preparation of Nanoelectrode Ensembles by Assembly of Nano—Silver Colloid on Gold Surface

A novel method for preparing silver nanoelectrode ensembles(SNEEs) and gold nanoelectrode ensembles (GNEEs) has been developed. Silver colloid particles were first absorbed to the gold electrode surface to form a monolayer silver colloid. N-hexadecyl nercaptan was then assembled on the electrode to form a thoil monolayer on which hydrophilic ions cannot be transfered. The SNEEs was prepared by removing thiol from silver colloid surface through applying and AC voltage with increasing frequency at 0.20V(vs.SCE). Finally,GNEEs was obtained by immersing a SNEEs into 6 mol/L HNO3 to remove the silver colloid particles. By comparison with other methods such as template method ect., this method enjoys some advantages of lower resistance, same diameter,easy preparation,controllable size and density.     

苯甲醛缩氨基脲铜（II）配合物为载体的高选择性硫氰酸根离子电极的研究

首次研究以苯甲醛缩氨基脲铜（II）[Cu(II)-BASA]为中性载体的PVC膜电极， 该电极对硫氰酸根离子（SCN~-）具有优良的电位响应特性并呈现出反Hofmeister 选择性行为，其选择性次序为：SCN~- > ClO_4~- > I~- > Sal~- > Br~- > NO_3~- > Cl~- > NO_2~- > SO_3~(2-) > SO_4~(2-) > H_2PO_4~-。电极在pH 6. 0的磷酸盐缓冲体系中，对SCN~-在1.0 * 10~(-1)～8.0 * 10~(-6) mol/L浓度范围 内呈近能斯特响应，斜率为56.0 mV/sSCN~- (28 ℃)，检测下限为3.0 * 10~(-6) mol/L。采用交流阻抗技术和紫外可见光谱技术初步研究了阴离子与载体的作用机 理，结果表明配合物中心金属原子的结构以及载体本身的结构与电极的响应行为之 间有非常密切的构效关系。该电极具有响应快、重现性好、检测限低、制备简单等 优点。将电极初步应用于实际样品废水分析，结果与HPLC法一致。     

铅在铂电极上的还原电位溶出分析法

研究了以亚铁氰化钾为还原剂铅在铂电极上的还原电位溶出法；讨论了电极的预处理、阳极富集和随后的还原电位溶出及铅测定的干扰。     

2-巯基乙醇自组装膜电极对多巴胺电催化氧化及其分析应用

在裸金电极上制备了 2 巯基乙醇自组装膜电极 (ME AuSAMs) ,研究了多巴胺 (DA)在ME AuSAMs上的电化学行为 ,发现该膜电极对DA的氧化具有良好的电催化作用 ,氧化过电位降低了 3 94mV ,测得DA的扩散系数D为 9.1 4 5× 1 0 - 7cm2 s,初步探讨了电催化机理。采用水平衰减全反射 傅里叶变换红外光谱 (ATR FTIR)技术对ME AuSAMs进行了表征 ;方波伏安法 (squarewavevoltammetry ,SWV)测定DA ,其氧化峰电流与DA浓度在 2 .0 0× 1 0 - 6 ～ 1 .0 0× 1 0 - 4 mol L范围内呈线性关系 ;相关系数为 0 .9998,检出限为 4 .0 0× 1 0 - 7mol L。该电极用于DA药物针剂的测定 ,结果满意     

电镀烧结法制备Ti/SnO2-Sb2O4电极的研究

The Ti/SnO₂-Sb₂O₄ electrode has been prepared by the electroplate-sinter method. The effect of SbCl₃ adding amount and sintering temperature on its electrode lifetime and oxygen evolution potential were investigated by means of EDX, SEM and XRD analysis. The results indicated that the electrode appeared the best performance when the SbCl₃ adding amounts was 0.2g and the sintering temperature was 550℃. In optimized conditions Ti substrate was entirely covered by SnO₂-Sb₂O₄ and the combinations among them were tight. Due to the use of electroplate method, the electrical conductivity, the oxygen evolution potential and the electrode lifetime were increased, so the elec-tro-catalytic activity and the electrochemical stability of the prepared electrode were found to be superior.     

高温镍氢动力电池用镍电极的研究

镍电极在高温充电过程中由于析氧而使充电效率不高,添加稀土化合物可以提高析氧过电位从而抑制氧气的析出,可以显著提高活性物质高温性能.本文选用稀土氧化物Y2O3、Yb2O3、Lu2O3作为添加剂,研究其对镍电极高温性能的影响,并将添加Y2O3与未添加稀土添加剂的电池进行高温性能作比较.研究发现:稀土添加剂可以抑制镍电极充电过程中氧气的析出,提高高温充电效率;同时减少活化周期,降低电池制造成本;另外,添加Lu2O3的正极高温活性物质比容量最高,添加氧化钇的正极高温充电效率最高,且成本最低,最具市场潜力.     

AB5型球形合金粉的表面处理研究

由雾化（Gas－atomization）技术制备的AB5型球形合金粉，作为镍氢电池负极材料具有很多优点：粉粒呈球状便于在多孔基片内装填；耐压耐磨性好；抗碱能力强且不易解胶．但它的电化学初活性差，难于活化．有碍电池中的应用．采用适宜的氧化剂（铜盐水溶液）处理，使球粒表面形成一个富铜、富镍亚层，显著地改善了合金粉的电化学活性．经处理的MlNi3.8CO0.5Mn0.3Al0.4球形合金粉，仅3次充放电循环其放电量便可达到240mA·h·g-1；而未经处理的同一合金粉即便经6次充放电循环其放电量也只有103mA·h·g-1．     

超微半扁球电极的稳态电流理论及其验证

本文用苯醌在Ｍｃｌｌｖａｉｎｅ缓冲溶液（ｐＨ＝７．０）中的电化学可逆还原反应体系验证了超微半扁球电极上的稳态电流方程式，理论与实验结果相符，超微半扁球汞电极用电镀法制备。     

细胞色素C的电化学行为研究

本文评述了细胞色素Ｃ电化学研究的发展概况，重点介绍了细胞色素Ｃ在促进剂作用下的电化学行为，促进剂种类，影响促进作用的因素及促进机理。