蜂窝密封内流动传热及转子动力特性的研究进展

蜂窝密封由于其具有优良的密封性能和转子动力特性而广泛应用于叶轮机械中.本文从实验研究、数值模拟和理论分析3个方面对蜂窝密封的研究现状及其进展进行了综述.主要内容包括:蜂窝密封泄漏特性及其密封机理的研究进展;蜂窝密封流动总温升特性的研究进展;蜂窝密封流热耦合作用下的流动传热特性研究进展;蜂窝密封非定常气流激振和转子动力特性的流固耦合机理研究进展.最后在蜂窝密封研究现状综述的基础上, 展望了蜂窝密封的发展方向.      

A Two-Layer Model for Superposed Electrified Maxwell Fluids in Presence of Heat Transfer

Based on a modified-Darcy-Maxwell model, two-dimensional, incompressible and heat transfer flow of two bounded layers, through electrified Maxwell fluids in porous media is performed. The driving force for the instability under an electric field, is an electrostatic force exerted on the free charges accumulated at the dividing interface. Normal mode analysis is considered to study the linear stability of the disturbances layers. The solutions of thelinearized equations of motion with the boundary conditions lead to an implicit dispersion relation between the growth rate and wave number. These equations are parameterized by Weber number, Reynolds number, Marangoni number, dimensionless conductivities, and dimensionless electric potentials. The case of long waves interfacial stability has been studied. The stability criteria are performed theoretically in which stability diagrams are obtained. Inthe limiting cases, some previously published results can be considered as particular cases of our results. It is found that the Reynolds number plays a destabilizing role in the stability criteria, while the damping influence is observed for the increasing of Marangoni number and Maxwell relaxation time.     

煤颗粒热解的传热传质分析

采用分布活化能模型及能量守恒方程对煤颗粒热解的传热传质过程建立数学模型,模型考虑煤热解的吸热效应及挥发分逸出时对流换热的影响.与有关煤粉和大颗粒煤热解的实验数据对比,对模型进行验证.针对煤颗粒的温度变化过程和煤热解过程进行数值分析,研究煤热解的吸热效应、挥发分气体逸出的对流效应、颗粒尺寸等参数的影响.     

直管束流固耦合振动的数值模拟

为了研究反应堆结构中的诸如燃料棒、蒸汽发生器和其它换热器传热管束等的流体-结构交互作用问题,利用有限体积法离散大涡模拟(large eddy simulation, LES)的流体控制方程,用有限元方法求解结构动力学方程,并结合动网格技术,建立三维流体诱发振动的数值模型,模拟直管束中流体的流动及结构振动,实现计算结构动力学(computational structure dynamics, CSD)与计算流体力学(computational fluid dynamics, CFD)之间的联合仿真．首先,基于流固耦合方法对单管的流致振动特性进行了详细分析,得到了其动力学响应与流场特性;其次基于建立的传热管束流致振动计算模型,研究了两并列管、两串列管以及3×3正方形排列管束的流致振动行为．     

Estimation of temperature elevation generated by ultrasonic irradiation in biological tissues using the thermal wave method

In most previous models,simulation of the temperature generation in tissue is based on the Pennes bio-heat transfer equation,which implies an instantaneous thermal energy deposition in the medium.Due to the long thermal relaxation time τ(20 s-30 s) in biological tissues,the actual temperature elevation during clinical treatments could be different from the value predicted by the Pennes bioheat equation.The thermal wave model of bio-heat transfer(TWMBT) defines a thermal relaxation time to describe the tissue heating from ultrasound exposure.In this paper,COMSOL Multiphysics 3.5a,a finite element method software package,is used to simulate the temperature response in tissues based on Pennes and TWMBT equations.We further discuss different factors in the bio-heat transfer model on the influence of the temperature rising and it is found that the temperature response in tissue under ultrasound exposure is a rising process with a declining rate.The thermal relaxation time inhibits the temperature elevation at the beginning of ultrasonic heating.Besides,thermal relaxation in TWMBT leads to lower temperature estimation than that based on Pennes equation during the same period of time.The blood flow carrying heat dominates most to the decline of temperature rising rate and the influence increases with temperature rising.On the contrary,heat diffusion,which can be described by thermal conductivity,has little effect on the temperature rising.     

电弧放电等离子体诱导激波的计算

基于电弧放电物理过程,分析气动激励机理,建立用于电弧放电等离子体诱导激波数值模拟的爆炸丝传热模型.主要结论有:电弧放电等离子体气动激励的主要机理是热等离子体的热阻塞效应,热电弧放电对于超声速来流而言就像-个具有-定斜坡角度的虚拟突起;理论分析只适用于纵坐标较小的阶段;当传热的功率设为放电功率的10%时,本文所建立的模型能够用于电弧放电等离子体诱导激波的仿真研究;等离子体虚拟斜坡角度及其诱导激波角都随来流总压和速度的增大而减小,随着放电功率的增大而增大,在总压、速度和放电功率较小的阶段这种变化较明显,在总压、速度和放电功率较大的阶段这种变化较缓慢.     

射流冲击泡沫金属流动液膜传热的实验研究

薄液膜蒸发由于其优良的传热特性而被广泛应用于工业领域。在流动液膜上表面覆盖铜质泡沫金属,并耦合空气射流冲击,能够进一步强化传热。多孔泡沫金属提供的毛细驱动力能够有效控制流动液膜的厚度以避免干涸,同时多孔材料特殊的固体骨架构造可以扩大固液、气液传热面积。为了研究射流冲击条件下多孔介质覆盖流动液膜的传热特性,本文通过实验方法,对包括液膜流速Vf、空气射流速度Va、液膜厚度δf和多孔介质孔隙率ε在内的影响因素进行分析,研究并对比这些因素对加热壁面温度Tw、表面传热系数hw以及传热系数提升率的影响。     

微通道中一类生物流体在高Zeta势下的电渗流及传热特性

在高壁面Zeta势下,研究滑移边界条件下满足牛顿流体模型的一类生物流体的电渗流动及传热特性,流体在外加电场、磁场和焦耳加热共同作用下流动.首先,在不使用Debye-Hückel线性近似条件时,利用切比雪夫谱方法给出非线性Poisson-Boltzmann方程和流函数满足的四阶微分方程及热能方程的数值解,将所得结果与利用Debye-Hückel线性近似所得结果进行比较,证明本文数值方法的有效性.其次,讨论电磁环境下壁面Zeta势、哈特曼数H、电渗参数m、滑移参数β对流动特性、泵送特性和捕获现象的影响,并探究焦耳加热参数γ和布林克曼数Br等参数对传热特性的影响.结果表明,壁面Zeta势、电渗参数m、滑移参数β的增大对流体速度有促进作用,而哈特曼数H的增大会抵抗流体流动.研究进一步表明,焦耳加热参数γ和布林克曼数Br的增大会导致温度升高.     

超临界压力煤油传热不稳定实验研究

在压力2.5~4 MPa, 质量流量0.7~1.7g/s, 入口温度20~250 ℃的实验条件下, 对煤油在内径1 mm, 长度300 mm竖直上升圆管中的流动及传热不稳定现象进行了实验研究.结果表明, 当热流密度增大到一定程度后, 传热不稳定开始发生.不稳定发生的起始热流密度随压力和流量的增加而增大, 随入口油温的升高而减小, 且当入口油温升高到一定程度后无不稳定现象发生.不稳定发生的初始时刻, 出口油温迅速增加, 管道壁温明显下降, 传热系数增大; 实验段局部流速增大, 进而在管道内部形成压力脉动并产生声音.不稳定结束后, 出口油温几乎保持不变, 壁温会缓慢增加, 直至下一次不稳定发生.      

内置扭带波纹管内熔盐传热特性数值研究

本文针对熔融盐吸热器传热与流动特性进行了深入的理论研讨与分析,对于太阳能热发电系统中吸热器传热过程中高辐射热流密度的特点,设计并建立内置扭带波纹管物理模型,采用RNG k-ε模型,对内置扭带的波纹管内熔盐传热特性进行数值模拟。分析了集热管轴向速度分布和横向截面二次流速和温度分布,对比了不同管型的集热管内换热效果和阻力系数f。研究结果表明:在入口雷诺数Re为12000~35000的范围内,相比圆管和普通波纹管,Nu均有提高,且随Re的增加呈递增趋势;普通波纹管和内置扭带的波纹管的阻力系数f都随着Re的增加呈递减趋势,相比于圆管,波纹管和内置扭带波纹管的f分别提高了282.3%~354.9%和1154.4%~1339.0%。