129I加速器质谱分析研究

通过对129I加速器质谱(AMS)分析中影响敏度和准确度各种参数的研究,如靶电极制备、压样、靶样中辅助介质（Matrix）的选择及使用比例等,优化了用于3 MV加速器质谱仪的SO-110型离子源的条件参数,确定129I-AMS测量的最佳靶电极材料为Cu,最佳的辅助介质为Nb粉末,Nb与AgI样品的最佳体积比为3∶1。在此条件下可以获得稳定且持续的I-束流进行测量129I/127I原子比值,实验测得西安加速器质谱仪的129I/127I本底值为1.5210-14。     

啁啾超短激光脉冲对稠密共振介质特性的调控

采用光与物质相互作用的半经典理论,建立了稠密二能级体系中含啁啾相位项的光学Bloch方程,并用高准确度、快速和可靠的四阶龙格-库塔法数值求解了该方程.通过数值计算,研究了啁啾超短激光脉冲与稠密共振二能级体系作用下的特性,得到了局域场和啁啾参量对Bloch矢量影响的规律.研究结果表明:局域场修正系数和啁啾参量对Bloch矢量的瞬态相干过程和稳态特性都会产生明显的调制作用,可以通过调节线性啁啾参量和局域场修正系数实现稳定的粒子数布居反转的调控.     

外加直流电场作用下高阶弱非线性复合介质的电势分布

利用同伦分析方法, 研究了一类由柱形杂质随机嵌入基质所形成的、电场和电流密度满足J = σ E + χ |E|²E + η|E|⁴E 形式本构关系的高阶弱非线性复合介质在外加直流电场作用下的电势分布问题. 首先利用模函数展开法, 将本构方程及边界条件化成了一系列非线性常微分方程的边值问题; 再利用同伦分析方法进行求解, 给出了电势在基质和杂质区域的渐近解析解. 关键词： 高阶弱非线性复合介质 模函数展开法 同伦分析方法 电势分布     

固体棒状热容激光器的热分析

 计算出固体棒状热容激光器在不同散热边界条件下的温度分布和随时间的演变,与实验测量的结果进行了对比。计算结果表明：激光器工作在热容模式时,不同散热边界条件下激光介质内的温度分布在激光发射期间区别不大,激光发射期间,激光介质内的温度分布主要取决于泵浦光的吸收。但是散热过程中的不同散热边界条件下温度分布演化大不相同,此时的温度分布主要取决于散热边界条件。     

Temporal Skewness of Electromagnetic Pulsed Waves Propagating Through Random Media with Ebedded Irregularity slab

Electromagnetic pulsed waves can be distorted in the propagation through random media,and their energy distributions change along the leading and trailing edge of the waveform,which can be presented by the temporal skewness.The skewness presents asymmetry and is treated by the third-order temporal moment,in which an analytic solution for the two-frequency mutual coherence function is obtained recently.Then,transionospheric pulses are discussed in details,Both theoretical analysis and numerical computation indicate that the contributions from scattering and dispersion of irregularities dominate over those of background,so the latter can be neglected in most cases.Also,the temporal skewness of a transionopheric pulse is negative and energy is shifted to the leading edge.     

介质膜滤波器色散特性的研究

采用信号处理的方法,对介质膜滤波器的滤波特性进行了详细的研究。介质膜滤波器是最小相位滤波器,它的幅度响应与相位响应之间存在希尔伯特变换规律,因此可以通过它的幅度响应重构它的相位响应,进而可以得到它的色散特性。为了验证理论分析,设计了射频调制法测试介质膜滤波器群速度延时的实验装置。实验测试了一个100GHz33信道的介质膜滤波器的群速度延迟。通过对实验结果与理论计算结果的对比分析,发现实验数据与理论分析吻合得比较好。最后,对介质膜滤波器的色散的特点进行了分析。     

探针尖带金属微粒的光子扫描隧道显微镜成像数值模拟

引入了色散介质的时域有限差分法散射场方程,并针对光子扫描隧道显微镜的带金属尖光纤扫描成像问题进行三维的数值模拟。在考虑了光纤和样品相互作用的情况下,采用等效入射波法设置入射波,探针扫描模式为等高扫描模式,从成像分辨力和灵敏度的角度,比较了不同入射角、不同的光纤一样品间距,不同金属类型,及不同金属尖大小的成像情况。数值模拟结果显示,带金属颗粒光纤探针尖的光子扫描隧道显微镜在成像分辨力和灵敏度上有显著的改进,而带不同类型金属颗粒情况下对分辨力影响不大,灵敏度是银最好。     

Optical bistability induced by quantum coherence in a negative index atomic medium

Bistability behaviors in an optical ring cavity filled with a dense V-type four-level atomic medium are theoretically investigated. It is found that the optical bistability can appear in the negative refraction frequency band, while both the bistability and multi-stability can occur in the positive refraction frequency bands. Therefore, optical bistability can be realized from conventional material to negative index material due to quantum coherence in our scheme.     

The mobility of nonlocal solitons in fading optical lattices

We study the soliton mobility in nonlocal nonlinear media with an imprinted fading optical lattice. The results show that the transverse mobility of solitons varies with the lattice decay rate and the nonlocality degree, which provides an opportunity for all-optical control of light.     

Bipolar resistive switching in BiFe_(0.95)Zn_(0.05)O_3 films

Bipolar resistive switching is studied in BiFe0.95Zn0.05O3 films prepared by pulsed laser deposition on （001） SrTiO3 substrate, with LaNiO3 as the bottom electrode, and Pt as the top electrode. Multiple steps of resistance change are ob- served in the resistive switching process with a slow voltage sweep, indicating the formation/rupture of multiple conductive filaments. A resistive ratio of the high resistance state （HRS） to the low resistance state （LRS） of over three orders of mag- nitude is observed. Furthermore, the conduction mechanism is confirmed to be space-charge-limited conduction with the Schottky emission at the interface with the top Pt electrodes in the HRS, and Ohmic in the LRS. Impedance spectroscopy demonstrates a conductive ferroelectric/interfacial dielectric 2-layer structure, and the formation/rupture of the conductive filaments mainly occurs at the interfacial dielectric layer close to the top Pt electrodes.