探究Cu/ZnO相互作用对CO2加氢制甲醇反应性能的影响

Using renewable green hydrogen and carbon dioxide (CO₂) to produce methanol is one of the fundamental ways to reduce CO₂ emissions in the future, and research and development related to catalysts for efficient and stable methanol synthesis is one of the key factors in determining the entire synthesis process. Metal nanoparticles stabilized on a support are frequently employed to catalyze the methanol synthesis reaction. Metal-support interactions (MSIs) in these supported catalysts can play a significant role in catalysis. Tuning the MSI is an effective strategy to modulate the activity, selectivity, and stability of heterogeneous catalysts. Numerous studies have been conducted on this topic; however, a systematic understanding of the role of various strengths of MSI is lacking. Herein, three Cu/ZnO-SiO₂ catalysts with different strengths of MSI, namely, normal precipitation Cu/ZnO-SiO₂ (Nor-CZS), co-precipitation Cu/ZnO-SiO₂ (Co-CZS), and reverse precipitation Cu/ZnO-SiO₂ (Re-CZS), were successfully prepared to determine the role of such interactions in the hydrogenation of CO₂ to methanol. The results of temperature-programmed reduction (H₂-TPR) and X-ray photoelectron spectroscopy (XPS) characterization illustrated that the MSI of the catalysts was considerably affected by the precipitation sequence. Fourier transform infrared reflection spectroscopy (FT-IR) results indicated that the Cu species existed as CuO in all cases and that copper phyllosilicate was absent (except for strong Cu-SiO₂ interaction). Transmission electron microscopy (TEM), X-ray diffraction (XRD), and N₂O chemical titration results revealed that strong interactions between the Cu and Zn species would promote the dispersion of Cu species, thereby leading to a higher CO₂ conversion rate and improved catalytic stability. As expected, the Re-CZS catalyst exhibited the highest activity with 12.4% CO₂ conversion, followed by the Co-CZS catalyst (12.1%), and the Nor-CZS catalyst (9.8%). After the same reaction time, the normalized CO₂ conversion of the three catalysts decreased in the following order: Re-CZS (75%) > Co-CZS (70%) > Nor-CZS (65%). Notably, the methanol selectivity of the Re-CZS catalyst was found to level off after a prolonged period, in contrast to that of Co-CZS and Nor-CZS. Investigation of the structural evolution of the catalyst with time on stream revealed that the high methanol selectivity of the catalyst was caused by the reconstruction of the catalyst, which was induced by the strong MSI between the Cu and Zn species, and the migration of ZnO onto Cu species, which caused an enlargement of the Cu/ZnO interface. This work offers an alternative strategy for the rational and optimized design of efficient catalysts.     

利用高炉水淬渣制备(Ca/Y)-α-Sialon陶瓷的组织与性能

以高炉水淬渣合成的Ca-α-Sialon粉体为原料采用无压烧结技术制备了（Ca/Y）-α-Sialon陶瓷。通过用排水法、三点弯曲实验法、金相显微镜法、XRD法等手段研究了（Ca/Y）-α-Sialon陶瓷的烧结致密化过程、材料的力学性能、显微组织、相组成和材料的断裂特征。结果表明,适量的Y2O3促进材料的烧结致密化和提高材料的力学性能,但Y2O3过量（大于10%）时对材料的烧结和力学性能不利。掺杂Y^3＋的（Ca/Y）-α-Sialon呈柱状晶,随着Y2O3含量的增加和烧结温度的提高,（Ca/Y）-α-Sialon呈柱状晶出现粗化和等轴化。含10%Y2O3的材料在1700℃烧结时可获得较高的力学性能。     

SSCH3光解离的多参考理论计算

摘要运用多参考微扰理论(Multireference MΦller-Plesset theory)计算了SSCH3垂直激发能及其S-C与S-S两种断键方式的绝热(Adiabatic)与非绝热(Diabatic)的基态和激发态势能曲线, 研究了在193nm激光作用下SSCH3的光解离过程, 理论计算值与实验值相符.     

NdOx作为助催化剂对PtRu/C电催化氧化甲醇活性的影响

采用沉积-还原法制备了PtRu-NdOx/C催化剂, 借助TEM、EDS和XRD等测试手段对其进行了微结构和组成的表征. 结果表明, 催化剂中Pt与Ru以合金形式存在, 而Nd的氧化物则以无定形形态存在. 催化剂粒子的平均粒径在2 nm左右, 晶胞参数为0.3896 nm, Nd氧化物的加入对PtRu合金的晶体结构影响不明显. 采用循环伏安法和计时电流法, 比较了PtRu-NdOx/C催化剂和PtRu /C催化剂对甲醇氧化的电催化活性, 结果表明, 加入Nd的氧化物作为助催化剂能明显提高PtRu /C催化剂对甲醇氧化的电催化性能.     

桥联双β-环糊精对N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸的手性识别及机理研究

利用紫外-可见吸收和荧光发射光谱, 结合非线性最小二乘法拟合曲线以及分子力学(MM2)模拟系统地研究了手性分子N-[4-(1-芘基)]丁酰-D/L-苯丙氨酸(PDP和PLP, 总称PPs)与β-环糊精(β-CD)、 2-位硒桥联双β-CD(2-SeCD)和2-位碲桥联双β-CD(2-TeCD)的包结能力大小及这3个环糊精对PPs手性识别能力的差异和识别机理. 研究结果表明, PPs不能与单疏水空腔的β-CD形成很好的包结复合物, 与具有较长桥联链的2-TeCD结合能力最强. 2-TeCD与PDP和PLP的结合常数分别为2.33×104和6.07×103 L/mol, 对PPs的手性识别比达到KD/KL=3.84, 高于2-SeCD(KD/KL=2.61). 用MM2模拟得出了PPs与这两个双环糊精形成复合物的三维结构: PPs的绝大部分位于双环糊精两个空腔之间, 但是在这两个复合物中, 苯环与芘环所成的二面角不同. 此外, PPs与这两个双环糊精作用时均存在明显的氢键相互作用, 且2-TeCD强于2-SeCD.     

二氧化碳和氧气的快速电化学方法联合测定

根据Ｏ２和ＣＯ２在二甲亚砜（ＤＭＳＯ）介质中Ｐｔ电极上的伏安特性，采用微电极并结构计算机控制的电位调制技术，建立了快速联合测定ＣＯ２和Ｏ２的调制电位脉冲库仑法和调制电位脉冲电流法，取得了满意的结果。一次测量时间快达４０ｍｓ。ＣＯ２检测范围０￣１０％（体积百分比）；Ｏ２检测范围不受限制。通过编程设计特定的调制电位－时间波形，可保持连续检测的长期稳定性。     

甲烷在Mo/HZSM-5催化剂上的脱氢聚合反应

对不同Mo含量的Mo／HZSM－5催化剂的结构进行了表征，并对这些催化剂的甲烷非氧气氛下的转化反应进行了考察．催化剂的BET比表面积及酸性随Mo含量的增加而降低，当Mo含量大于5％时，Mo对ZSM－5分子筛的晶型有影响，并出现MoO3物相．甲烷在700℃时可高选择性地生成苯和乙烯，最佳Mo含量大约为2％．纯的MoO3或HZSM－5上该反应几乎不进行，因此，可能是分散的钼氧离子和分子筛的酸中心是甲烷转化的活性中心，只有二者的协同作用才能促进甲烷的转化．反应后催化剂中的钼物种被还原了．催化剂上的积炭可能是催化剂失活的主要原因之一，烧炭后催化剂活性基本恢复．     

SYNTHESIS OF MESOPOROUS POLY(STYRENE-co-MALEIC ANHYDRIDE)/SILICA HYBRID MATERIALS VIA A NONSURFACTANT-TEMPLATED SOL-GEL PROCESS*

Mesoporous poly (styrene-co-maleic anhydride)/silica hybrid materials have been prepared. The synthesis wasachieved by the HCl-catalyzed sol-gel reactions of tetraethyl orthosilicate (TEOS) and styrene-maleic anhydride copolymerin the presence of 3-aminopropyl triethoxysilane (APTES) as a coupling agent and citric acid as a nonsurfactant template orpore-forming agent, followed by ethanol extraction. Characterization results from nitrogen sorption isotherms and powder X-ray diffraction indicate that polymer-modified mesoporous materials with large specific surface areas (e.g. 900 m~2/g) andpore volumes (e.g. 0.6 cm~3/g) could be prepared. As the citric acid concentration is increased, the specific surface areas, porevolumes and pore diameters of the hybrid materials increase.     

Highly Efficient Pd/C-Catalyzed Suzuki Coupling Reaction of p-（un）Substituted Phenyl Halide with （p-Substituted phenyl） Boronic Acid

A highly efficient Pd/C-catalyzed ligandless, heterogeneous Suzuki reaction of p-（un）substituted phenyl halide with （p-substituted phenyl）boronic acid in DMF/H2O solvent in a short reaction time （0.5 h） at 75 ℃ was developed. The key for such a catalytic system was the addition of 1 equivalent of tetrabutylammonium bromide. A wide variety of substituents can be tolerated and high yields of cross coupling products were achieved. The palladium catalyst can be easily recovered and reused without significantly decreasing its efficiency.     

均三氮苯类除草剂结构与活性的理论研究

利用Gaussian03程序包中的B3LYP方法,选择6-31G基组对均三氮苯类除草剂及类似衍生物2-(4-溴苄氨基)-4-甲基-6-三氟甲基-1,3,5-三氮苯进行了量子化学计算,从理论上讨论了它们的空间结构、电子结构特征与活性的关系.计算结果表明:三氮苯环与N(7)和N(8)原子形成了共轭结构,分子活性大小与LUMO轨道的得电子能力以及在LUMO轨道中占主要成分的原子有重要关系.N(7)和N(8)连接单个具有推电子能力的基团,有利于生物活性的提高.对于2-(4-溴苄氨基)-4-甲基-6-三氟甲基-1,3,5-三氮苯中,N(8)和C(9)是重要的活性部位,和传统的均三氮苯类除草剂分子相比,与D1蛋白上不同的氨基酸残基发生了键合作用.