LOW DENSITY POLYETHYLENE/CLAY NANOCOMPOSITES MODIFIED BY ETHYLENE COPOLYMERS： EFFECTS OF FUNCTIONALIZED SEGMENTS ON MORPHOLOGY

Melt extrusion was used to prepare binary nanocomposites of ethylene copolymers and organoclay and trinary nanocomposites of low-density polyethylene （LDPE）, ethylene copolymer and organoclay. X-ray diffraction （XRD） and transmission electron microscopy （TEM） were used to analyze the structure of the clay phase and the morphology of the nanocomposites. Influences of the comonomer in the copolymer and the content of the copolymer on the morphology of the resulting nanocomposites were discussed. The binary and the trinary composites may form intercalated or exfoliated structures depending on the interaction between the copolymer and the clay layers and the content of the copolymer.     

Highly Selective Salicylate Membrane Electrode Based on N,N＇- （Aminoethyl）ethylenediamide Bis（2-salicylideneimine） Binuclear Copper（Ⅱ） Complex as Neutral Carrier

A new ion selective electrode for salicylate based on N,N＇-（aminoethyl）ethylenediamide bis（2-salicylideneimine） binuclear copper（Ⅱ） complex [Cu（Ⅱ）2-AEBS] as an ionophore was developed. The electrode has a linear range from 1.0 × 10^-1 to 5.0 ×10^-7 mol·L^- 1 with a near-Nemstian slope of （ - 55 ±1 ） mV/decade and a detection limit of 2.0 × 10-7 mol·L^-1 in phosphorate buffer solution of pH 5.0 at 25 ℃. It shows good selectivity for Sal^- and displays anti-Hofmeister selectivity sequence： Sal^-〉SCN^-〉 ClO4^- 〉I^-〉 NO2^- 〉Br^-〉 NO3^- 〉Cl^-〉 SO3^2- 〉 SO4^2- The proposed sensor based on binuclear copper（Ⅱ）complex has a fast response time of 5-10 s and can be used for at least 2 months without any major deviation. The response mechanism is discussed in view of the alternating current （AC） impedance technique and the UV-vis spectroscopy technique. The effect of the electrode membrane compositions and the experimental conditions were studied. The electrode has been successfully used for the determination of salicylate ion in drug pharmaceutical preparations.     

二氯亚甲基锗烯与乙烯环加成反应机理的理论研究

The mechanism of a cycloaddition reaction between singlet dichloromethylene germylene and ethylene has been investigated with B3LYP/6-31G＊ method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies for the involved conformations were calculated by CCSD（T）//B3LYP/6-31G＊ method. On the basis of the surface energy profile obtained with CCSD（T）// B3LYP/6-31G＊ method for the cycloaddition reaction between singlet dichloromethylene germylene and ethylene, it can be predicted that the dominant reaction pathway is that an intermediate INT1 is firstly formed between the two reactants through a barrier-free exothermic reaction of 61.7 kJ/mol, and the intermediate INT1 then isomerizes to an active four-membered ring product P2.1 via a transition state TS2, an intermediate INT2 and a transition state TS2.1, in which energy barriers are 57.7 and 42.2 kJ/mol, respectively.     

多缩乙二醇二苯醚与甲醛缩聚合成酚醛型聚合物假冠醚的研究

本文采用苯酚、多缩乙二醇二氯化物、多缩乙二醇等为起始原料,合成了九个多缩乙二醇二苯醚新单体,经甲醛聚合获得一系列聚合物假冠醚,并对它们的溶解性能、络合性能以及催化作用等进行研究。     

Isolation of New Disilanylene-bridged Bis（cyclopentadienyl）tetracarbonyldiiron Complexes and Molecular Structure of [η^5, η^5-C5H4SiMe（SiMePh2）C5H4]Fe2（CO）2（μ-CO）2

1,2-Diphenyl-1,2-dimethyldisilanylene-bridged bis-cyclopentadienyl complex[η~5,η~5-C_5H_4PhMeSiSiMePh-C_5H_4]Fe_2(CO)_2(μ-CO)_2(1)was synthesized by a modified procedure,from which the trans-isomer 1b that was pre-viously difficult to obtain has been isolated for the first time.More interestingly,two new regio-isomers[η~5,η~5C_5H_4SiMe(SiMePh_2)C_5H_4]Fe_2(CO)_2(μ-CO)_2(2)and [η~5,η~5-C_5H_4Me_2SiSiPh_2C_5H_4]Fe_2(CO)_2(μ-CO)_2(3)were occa-sionally obtained during above process,the novel structures of which opened up new options for further study ofthis type of Si—Si bond-containing transition metal complexes.The molecular structure of 2 has been determinedby the X-ray diffraction method.     

二芳杂环基乙烯的合成及其光致变色反应研究

本文报道了2,3-双 (1,2-二甲基-3-吲哚基)-2-丁烯 (DF1),2,3-双 (1,4-二苯基-2-甲基-3-吡咯基)-2-丁烯 (DF2), 2,3-双(1-对甲苯基-4-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF3), 2,3-双(1-对溴苯基-4-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF4) 和2,3-双 (1-对甲氧苯基-5-苯基-2-甲基-3-吡咯基)-2-丁烯 (DF5) 的合成,以及它们的光致变色行为的研究。特别是DF1和DF5的光呈色和光消色过程进行了较为细致的研究。     

苯乙烯基氮氧杂芳烃间的交叉光二聚反应

用中压汞灯(λ > 300 nm)照射4-苯乙烯基吡啶、2-苯乙烯基苯并噁唑和5-苯基-2-苯乙烯基噁唑三种杂芳基乙烯单体中任意两种的硫酸水溶液，得到三种交叉二聚体.用高效液相色谱跟踪研究了交叉光二聚反应，发现每组反应生成三种光二聚体，其中二种为单体自身的光二聚体，而另外一种是两种不同单体的交叉光二聚体.交叉二聚体通过柱色谱分离得到，其顺式头对尾结构经紫外、红外、氢谱、碳谱和元素分析确定.用紫外光谱和高效液相色谱跟踪研究了交叉光二聚体的稀溶液在低压汞灯（λmax=254 nm）照射下的光解反应.研究发现交叉二聚体能够彻底发生光解，首先生成原来的反式单体，所生成的反式单体容易发生异构化而生成顺式单体，最终建立起反顺异构化平衡.     

羟基磺酸、氨基磺酸和磺酰肽的合成

具有四面体结构的磺酸衍生物可用于模拟酯键和酰胺键水解的过渡态，特别是 含有四面体结构磺酰胺键的磺酰肽作为天然肽的硫类似物，广泛用于作为酶抑制剂 以及用来诱导抗体酶的半抗原。综述了羟基磺酸、氨基磺酸和磺酰肽的合成。重点 介绍了消旋的和手性的α－和β－取代的β－氨基磺酸及其酰氯和亚磺酰氯，γ－ 氨基－α，β－不饱和磺酸及其酰氯的合成，以及由它们作为基元分子通过液相和 固相方法来合成α－和β－取代的β－磺酰肽、亚磺酰肽及乙烯磺酰肽。     

铬系乙烯齐聚和聚合催化剂

综述了近年来国内外铬系催化剂的最新研究进展。介绍了该类催化剂齐聚和合的性能研究和应用，讨论了该催化剂长期引起争议的活性中心，活性价态，以及反应机理，并同时预测了铬系催化剂在工业和纳米技术方面的发展趋势。