浊点萃取在生物大分子分离及分析中的应用

浊点萃取是一种新兴的环保型液2液萃取方法。本文介绍了表面活性剂胶束溶液的形成过程和浊点现象, 总结了浊点萃取法的操作方法, 并且详细讨论了它在生物大分子分离纯化及生物分析中的应用。最后探讨了该技术的发展前景。     

有机化合物中硫元素的微量库仑分析

含硫有机化合物在竖式石英燃烧管中,于氧气流下经950℃高温燃烧分解,生成的二氧化硫(或三氧化硫)通过含双氧水的石英棉转化管,转化为硫酸。硫酸泵入电解池后,进行酸-碱库仑滴定。本法操作按时间程序控制进行,每次分析时间为15分钟,分析绝对误差为±0.5％对含磷的有机硫化合物及含钠、铁、铜、钼、镍、镧等金属的有机硫化合物,如在样品上复盖一层三氧化钨进行燃烧分解,也可获得满意的结果。     

含茂基及酰亚胺基镧系金属有机化合物的合成

在室温下由邻苯二甲酰亚胺[phthalimide, H(Pht)]与Cp3Ln在四氢呋喃溶液中反应, 合成了六个新化合物: Cp2Ln(pht),CpLn(pht)2, (Cp=cyclopentadienyl; Ln=Yb, Er, Dy;pht=phthalimido)。它们均经元素分析、红外光谱和质谱鉴定, 为非溶剂化的桥式二聚体结构。     

新型Zhuo酚酮类糖苷化合物的合成

根据Zhuo酮的结构特点，对Zhuo酚酮类化合物与半乳糖的Kenigs-Knorr反应进 行了研究。探索出一种具有较高立体选择性的合成方法，从而制得四种具有β－构 型的单一端基异构体的Zhuo酚酮半乳糖苷新化合物。生成的新化合物不但保持了原 有的生理活性，而且降低了毒性、提高了药效，为人工合成Zhuo酚酮类增添新化合 物的同时，也扩展了此类化合物的应用领域。应用元素分析、核磁共振、红外光谱 表征了它们的结构。     

Cleavage of the Fe—Fe Bond of （Me2SiSiMe2） [η^5－C5H4Fe（CO）2]2 with Na／Hg and Molecular Structure of the Ring－Opened Complex

The reaction of the rifle cyclic complex (1) with sodium amalgam in THF resulted in the expected cleavage of the Fe-Fe bond to afford his-sodium salt ( Me2SiSiMe2 ) [η^5-C5H4Fe(CO)2]2 (4). The latter was not isolated and was used directly to react with MeI, PhCH2Cl, CH3C(O)Cl, PhC(O)Cl,Cy3SnCl (Cy= cyclohexyl) or Ph3SnCl to afford corresponding ring-opened derivatives (Me2SiSiMe2) [η^5-C5H4Fe(CO)2]2 [5, R=Me; 6, R=PhCH2; 7, R=CH3C(O); 8, R=PhC(O); 9, R = Cy3Sn or 10, R = Ph3Sn ]. The crystal and molecular structures of 10 were determined by X-ray diffraction analysis. The molecule took the desired ant/ conformation around the Si-Si bond. The length of the Si--Si bond is 0.2343(3)nm, which is essentially identical to that in the cyclic structure of 1[0.2346(4) tun]. This result unambiguously demonstrates that the Si--Si bond in the cyclic structure of 1 is not subject to obvious strain.     

B20N20团簇的结构与稳定性

B3LYP/6-31G* density functional theory calculations have been carried out on the structure and stability of ten B20N20 clusters. It was found that two new proposed isomers with two octagons, twelve hexagons, eight squares in Cab and C2 symmetry were more stable than the isomer with sixteen hexagons and six squares in C2 symmetry which was previously deemed to the most stable by 79.5 and 13.8 kJ/mol respectively. The isomer with two decagons in S10 symmetry is much higher in energy than the most stable structure in C4h symmetry by 637.2 kJ/mol.     

斯蒂芬酸氢铷的制备，晶体结构和热分解机理

A new compound,[RbHTNR]_∞[HTNR:C_6H(NO_2)_3(OH)O],was synthesized by the reaction of rubidium ni-trate and styphnic acid.The molecular structure was characterized using X-ray diffraction analysis,elementalanalysis and FTIR spectroscopy.The crystalline is monoclinic with space group P2_1/n and the empirical formulaC_6H_2N_3O_8Rb.The unit cell parameters are:a=0.4525 nm,b=1.0777 nm,c=1.9834 nm,β=90.47(2)°,V=0.96725 nm~3,Z=4,D_c=2.263 g/cm~3,Mr=329.58,F(000)=640,μ(Mo Kα)=5.165 mm~(-1).The thermal decompo-sition mechanism of the complex was studied by differential scanning calorimetry(DSC),thermogravimetry-derivative thermogravimetry(TG-DTG)and FTIR techniques.At the linear rate of 10 ℃/min,the thermaldecomposition of the complex showed three mass reducing processes between 60 and 500 ℃,and finally evolvedRbCN and some gaseous products.     

碘化物-结晶紫-聚乙烯醇体系分光光度法测定自来水中痕量二氧化氯

在稀磷酸介质中，二氧化氯（ＣｌＯ２）氧化Ｉ离子形成 Ｉ３配阴离子，Ｉ３进一步与结晶紫（ＣＶ）阳离子形成离子缔合物［ＣＶ］［Ｉ３」。在聚乙烯醇存在下，该离子缔合物最大吸收波长λｍａｘ位于５５２ ｎｍ处，摩尔吸光系数ε＝２５ × １０５Ｌ·ｍｏｌ－１·ｃｍ－１，对 ＣｌＯ２的检出限为 ０．６ μｇ／Ｌ，线性范围是 ０．６～２８０μｇ／Ｌ。加入适量 ＫＦ溶液可消除自来水中Ｆｅ（Ⅲ）的干扰。方法对μｇ／Ｌ级ＣｌＯ２ 的测定有较好的选择性，可成功地用于自来水样品分析。     

1,6-六亚甲基二异氰酸酯自聚产物的结构表征

用IR与NMR表征了用醋酸钾为催化剂时 1,6 六亚甲基二异氰酸酯 (HDI)自聚产物的结构 .结果表明 ,自聚主产物是三聚体异氰脲酸酯 ,主要含有三聚体异氰脲基、异氰酸根 ,同时含有由杂质带来的微量氨基甲酸酯、脲基甲酸酯基、取代脲基、缩二脲基 .一维核磁谱及二维化学位移相关谱分辨出 7种羰基 ,一种NCO基 ,确定了氮上 8种不同取代结构的分子链连接情况 .通过建立理论模型 ,定量地描述了自聚产物的结构 .     

STRUCTURE OF CRYSTALLINE DOMAINS IN SEMICRYSTALLINE BLOCK COPOLYMER THIN FILMS

Thin film morphology of a symmetric semicrystalline oxyethylene/oxybutylene diblock copolymer （E76B38） on silicon was investigated by tapping mode atomic force microscopy （AFM）. It is found that the nascent thin film is composed of multiple polymer layers having mixed thicknesses of L ≈ L0 and L ≈ L0/2 （L0 is the long period of the block copolymer in bulk） besides the first layer near the substrate. This shows that the crystalline domain in the block copolymer consists of double poly（oxyethylene） layers. Annealing leads to disappearance of the polymer layers with thickness L ≈L0/2, indicating that such polymer layers are metastable.