Light-emitting diode-induced fluorescence detection of native proteins in capillary electrophoresis

A continuous-wave 280 nm light-emitting diode (LED) was used as the excitation source for native fluorescence detection of proteins in CE. The operating current and temperature of the LED were optimized in order to achieve high luminescence power. It was found that a forward current of 30 mA and a temperature of approximately 5 degrees C gave the best S/N. By using a set of two ball lenses to focus light from the LED, we achieved a spot of approximately 200 mum with a power of 0.1-0.2 mW on the detection window. Fluorescence was collected with a ball lens at 90 degrees angle through a bandpass filter onto a photomultiplier tube. In CZE an LOD of 20 nM for conalbumin was reached. In capillary gel electrophoresis all eight proteins from a commercial standard kit were detected with high S/N. For a 10 microg/mL total protein mixture, S/N was better than 3 for all proteins in solution. Further improvement in LOD should be possible on utilization of an LED with higher luminescence power.     

6291型热变形温度和维卡软化温度测试仪的校准及故障排除

介绍6291型热变形温度和维卡软化温度测试仪的温度校准和位移校准方法，对测试仪的一些常见故障，例如电源故障，主温度传感器故障，电加热系统控制单元故障及测试站的温度偏差较大等进行了分析，并给出了排除故障的方法。     

Theoretical study of reaction channels for the weakly bound complex systems created with HF,CO2, and various amines

This investigation conducted reaction channels of weakly bound complexes CO₂…HF, CO₂…HF…NH₃, CO₂…HF…NH₂CH₃, CO₂…HF…NH(CH₃)₂, and CO₂…HF…N(CH₃)₃ systems, using the Gaussian 98 package at the B3LYP/6‐311++G(3df,2pd) level. The syn‐fluoroformic acid or syn‐fluoroformic acid plus NH₃ or amine conformers are more stable than the related anti‐fluoroformic acid or anti‐fluoroformic acid plus NH₃ or amine conformers. However, the above‐mentioned weakly bound complexes are more stable than both the related syn‐ and anti‐type fluoroformic acid or acid plus NH₃ or amine conformers and their related decomposed into CO₂ + HF or CO₂ + NHR₃F (R?H, CH₃) combined molecular systems. Five reaction channels of the weakly bound complexes exist. Each channel includes weakly bound complexes and their related above‐mentioned systems. Moreover, each reaction channel contains two transition states. The transition state between the weakly bound complex and anti‐fluoroformic acid type structure (T₁₃) is significantly higher than that of internal rotation (T₂₃) between syn‐ and anti‐FCO₂H (or FCO₂H…NR₃) structures. However, the above‐mentioned T₁₃ can significantly decrease its energy by adding the third molecule NH₃ or NR₃ (R?H or CH₃). The more CH₃ that is substituted in NR₃ of the reaction channel, the lower the activation energy of the transition state in the system is affected. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

一步室温固相化学反应合成纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O

以Keggin结构的钼磷酸(H3PMo12O40·13H2O)与苯丙氨酸(Phe)为原料,利用一步固相化学反应于室温合成了纳米氨基酸杂多电荷转移配合物(HPhe)3PMo12O40·2H2O,采用元素分析,IR,XRD,TEM,UV和循环伏安法等手段对其进行了结构表征及性质研究.结果表明,标题化合物纳米粒子为均匀的球状,粒径约为30～40nm.该化合物中杂多阴离子部分仍保持Keggin结构,但在钼磷酸与苯丙氨酸之间发生了显著的电荷转移.     

Cis‐trans Isomerism in Copper(II) Complexes with N‐acyl Thiourea Ligands

The N‐acyl thiourea complexes bis[N,N‐diethyl‐N′‐(p‐nitrobenzoyl)‐thioureato]copper(II) ( 1a,1b ) and bis(N,N‐diphenyl‐N′‐benzoylthioureato)copper(II) ( 2a,2b ) crystallize in each case in two modifications. X‐ray structural analysis shows that 1a and 1b are cis‐trans isomers. This is very unusual for N‐acyl thioureato complexes because with exception of one platinum(II) complex up to now only cis complexes have been found. In contrast X‐ray structural analysis of both forms 2a and 2b of the other complex shows no cis‐trans pair. Both modifications are cis complexes. In solution both isomers of the copper(II) complexes are observable by EPR spectroscopy.     

Preparation and characterization of novel polyaryloxydiphenylsilanes with high glass transition temperature by melt polycondensation of dianilinodiphenylsilane with bisphenols

Novel polyaryloxydiphenylsilanes with reduced viscosities of 0.31–0.65 dL/g were obtained by the melt polycondensation of dianilinodiphenylsilane with three bisphenols, 2,2-bis (4-hydroxyphenyl)-1,1,1,3,3,3-hexafluoropropane, 3 (4-hydroxyphenyl)-1,1,3-trimethyl-5-indanol, and 9,9-bis (4-hydroxyphenyl) fluorene, at 200–320°C in vacuo. These polymers are all amorphous and readily soluble in a wide variety of organic solvents such as chlorinated and aromatic hydrocarbons, cyclic ethers, and polar aprotic solvents. Because of their bulky and/or rigid ring structures, polyaryloxydiphenylsilanes containing diphenylhexafluoropropane, phenylindane, and diphenylfluorene units in the main chain have high glass transition temperatures of 106, 112, and 172°C, respectively. They are thermally stable showing almost no weight loss up to 350°C in air. Colorless, transparent, but brittle films are obtained from these polymers by solution casting. Ultraviolet transmission is sharply cut off by these polyaryloxydiphenylsilane films at ca. 300 nm, and the cut-off wavelength depends on the bisphenols used.     

On the pressure-induced phase transformation in the structure II clathrate hydrate of tetrahydrofuran

A high-pressure phase of the clathrate hydrate of tetrahydrofuran was prepared by freezing a liquid phase of overall composition THF · 7 H₂O under a pressure of 3.0 kbar, or by pressurizing the solid structure II THF hydrate of 255K to 3.4 kbar. Unfortunately, the products recovered at 77K were always mixed phase materials as shown by X-ray powder diffraction. A number of diffraction lines could be indexed in terms of the cubic structure I hydrate with a slightly expanded lattice parameter, 12.08 Å, giving some support to Dyadin's idea that the high pressure phase transition involves a conversion of Structure II to Structure I. Other phases observed in the recovered product include Ice IX and amorphous materials. The reversion of the high pressure sample to the structure II hydrate was followed by differential scanning calorimetry. At ambient pressure, the high pressure sample converts slowly back to Structure II hydrate event at 77K.NRCC No. 35786.     

Effect of film thickness and supercooling on the performance of cholesteryl cinnamate liquid crystal capillary columns

Improved separations of the isomers of olefinic aliphatic insect pheromones were obtained on cholesteryl cinnamate glass capillary columns by operating in the supercooled temperature range of the liquid crystal. Capillary columns were prepared with varying film thickness of the stationary phase; choice of the correct film thickness ensured optimum retention for a wide range of compounds within the most effective temperature range of the liquid crystal. The deactivation procedures described made the liquid crystal columns suitable for separation of the geometric isomers of polar and nonpolar compounds.     

Enhanced Acid/Base Catalysis in High Temperature Liquid Water

High temperature liquid water (HTLW), as an environmentally benign medium, has drawn increasing attention for organic chemical reactions and biomass conversion1-3. HTLW has a strong tendency to ionize and can act as an acid and/or base catalyst. In addition, HTLW can dissolve organic compounds to some extent allowing for a homogenous reaction within an aqueous phase. Extensive researches4-10 have been pursued on acid/base-catalysis reactions in HTLW without addition of acid or base. Howe…     

Multiplex amplified product-length polymorphism analysis of 36 mitochondrial single-nucleotide polymorphisms for haplogrouping of East Asian populations

We present a reliable, rapid, and economical multiplex amplified product-length polymorphism (APLP) method for analyzing the haplogroup-diagnostic mitochondrial single-nucleotide polymorphisms (mtSNPs) in East Asian populations. By examining only 36 haplogroup-specific mtSNPs in the coding region by using four 9-multiplex polymerase chain reaction (PCR) and subsequent electrophoresis, we could safely assign 1815 individuals from 8 populations of Japanese, Korean, Chinese, and Germans to 45 relevant haplogroups. This multiplex APLP analysis of coding-region mtSNPs for haplogrouping is especially useful not only for molecular phylogenetic studies but also for large-scale association studies due to its rapid and economical nature. This is the first panel of mtSNPs in the coding region to be used for haplogrouping of East Asian populations.