Parahydrogen induced polarization of barbituric acid derivatives: 1H hyperpolarization studies

Homogeneous hydrogenation of barbituric acid derivatives with parahydrogen yields a substantial increase of the (1)H NMR signals of the reaction products. These physiologically relevant compounds were hydrogenated at both ambient and elevated temperatures and pressures using a standard cationic rhodium catalyst. The resulting nonthermal nuclear spin polarization (hyperpolarization) is limited by the spin-lattice relaxation time T(1) of the corresponding nuclei in the products, being shorter than the time constant of the hydrogenation. The signal-to-noise ratio of the NMR spectra could be further increased upon signal averaging the antiphase PHIP signals of 25 successive scans following 30 degrees pulse experiments and a delay of 10 s.     

Organic semiconductors for solution-processable field-effect transistors (OFETs)

The cost-effective production of flexible electronic components will profit considerably from the development of solution-processable, organic semiconductor materials. Particular attention is focused on soluble semiconductors for organic field-effect transistors (OFETs). The hitherto differentiation between "small molecules" and polymeric materials no longer plays a role, rather more the ability to process materials from solution to homogeneous semiconducting films with optimal electronic properties (high charge-carrier mobility, low threshold voltage, high on/off ratio) is pivotal. Key classes of materials for this purpose are soluble oligoacenes, soluble oligo- and polythiophenes and their respective copolymers, and oligo- and polytriarylamines. In this context, micro- or nanocrystalline materials have the general advantage of somewhat higher charge-carrier mobilities, which, however, could be offset in the case of amorphous, glassy materials by simpler and more reproducible processing.     

Diastereoselective fragmentation of chiral alpha-aminophosphonic acids/metal ion aggregates

Diastereomeric clusters of general formula [MAB(2)](+) and [MA(2)B](+) (M = Li(I), Na(I), Ag(I), Ni(II)-H, or Cu(II)-H; A = (R)-(-)- and (S)-(+)-(1-aminopropyl)phosphonic acid; B = (1R)-(-)- and (1S)-(+)-(1-aminohexyl)phosphonic acid) have been readily generated in the electrospray ionization (ESI) source of a triple-quadrupole mass spectrometer and their collision-induced dissociation (CID) investigated. CID of diastereomeric complexes, e.g. [MA(S)(B(S))(2)](+) and [MA(R)(B(S))(2)](+), leads to fragmentation patterns characterized by R(homo) = [MA(S)B(S)](+)/[M(B(S))(2)](+) and R(hetero) = [MA(R)B(S)](+)/[M(B(S))(2)](+) abundance ratios, which depend upon the relative stability of the diastereomeric [MA(S)B(S)](+) and [MA(R)B(S)](+) complexes in the gas phase. The chiral resolution factor R(chiral) = R(homo)/R(hetero) is found to depend not only on the nature of the M ion but also on that of the fragmenting species, whether [MAB(2)](+) or [MA(2)B](+). The origin of this behavior is discussed.     

Investigation of copper-azamacrocyclic complexes by high-performance liquid chromatography

The use of copper radioisotopes in imaging and therapy has prompted an increased interest in chelators which form stable copper complexes, such as Cu(II)-azamacrocyclic complexes. The effects of charge, stability and the size of the macrocyclic backbone of the Cu(II)-azamacrocyclic complexes on biological behavior have been evaluated. Here we report a reversed-phase high-performance liquid chromatography (HPLC) method to separate several Cu(II)-azamacrocyclic complexes, including Cu(II) complexes of 1,4,8,11-tetraazacyclotetradecane-1,4,8,11-tetraacetic acid (TETA), 4,11-bis(carboxymethyl)-1,4,8,11-tetraazabicyclo[6.6.2]hexadecane (CB-TE2A) and 4,10-bis(carboxymethyl)-1,4,7,10-tetraazabicyclo[5.5.2]tetradecane (CB-DO2A). Absorbance at 280 nm was used to monitor the complexes as they eluted from the reversed-phase column. The effects of the concentration of the buffer, the pH of the buffered mobile phase and the concentration of the organic modifier, methanol, on the separation were investigated. Separation of these copper complexes by ion-pair HPLC with the use of a mass spectrometry-compatible ion-pair reagent, triethylammonium acetate, in the mobile phase at pH 6.3 is also presented. The reversed-phase chromatographic conditions utilized also allow the pK(a)s of Cu-TETA and the log(k'w) values of Cu-CB-TE2A, Cu-TETA and Cu-CB-DO2A to be estimated.     

Determination of acyclovir in horse plasma and body fluids by high-performance liquid chromatography combined with fluorescence detection and heated electrospray ionization tandem mass spectrometry

Two methods are presented for the determination of 'respectively' the plasma protein unbound and total concentration of acyclovir in horse plasma and body fluids: first, a liquid-liquid extraction was performed on plasma, combined with HPLC-fluorescence detection for the total plasma concentration; second a more sensitive method using high-performance liquid chromatography combined with heated electrospray ionization tandem mass spectrometry (LC-HESI-MS/MS) was described for plasma and for body fluids analysis. To obtain the unbound concentration of acyclovir in plasma, a simple deproteinization step using a Microcon filter was performed. Ganciclovir was used as an internal standard. Analysis was carried out on an Inertsil 5 ODS-3 column for the HPLC-fluorescence method. For the LC-HESI-MS/MS method a PLRP-S column was used. The limit of quantification (LOQ) for the total concentration was set at 50 and 2 ng mL(-1) for the HPLC-fluorescence method and the LC-HESI-MS/MS method, respectively. The limit of quantification for the unbound concentration was set at 5 ng mL(-1) and at 2 ng mL(-1) for body fluids. The methods were successfully used to perform pharmacokinetic and clinical studies in horses after intravenous and oral dosage of acyclovir and its prodrug valacyclovir.     

Role and effective treatment of dispersive forces in materials: Polyethylene and graphite crystals as test cases

A semiempirical addition of dispersive forces to conventional density functionals (DFT-D) has been implemented into a pseudopotential plane-wave code. Test calculations on the benzene dimer reproduced the results obtained by using localized basis set, provided that the latter are corrected for the basis set superposition error. By applying the DFT-D/plane-wave approach a substantial agreement with experiments is found for the structure and energetics of polyethylene and graphite, two typical solids that are badly described by standard local and semilocal density functionals.     

Identification of amyloidogenic peptide sequences using a coarse-grained physicochemical model

Cross-beta amyloid is implicated in over 20 human diseases. Experiments suggest that specific sequence elements within amyloidogenic proteins play a major role in seeding amyloid formation. Identifying these seeding sequences is important for rationalizing the molecular mechanisms of amyloid formation and for elaborating therapeutic strategies that target amyloid. Theoretical techniques play an important role in facilitating the identification and structural characterization of putative seeding sequences; most amyloid species are not amenable to high resolution experimental structure techniques. In this study we have combined a coarse-grained physicochemical protein model with a highly efficient Monte Carlo sampling technique to identify amyloidogenic sequences in four proteins for which respective experimental peptide fragmentation data exist. Peptide sequences were defined as amyloidogenic if the ensemble structure predicted for three interacting peptides described a stable and regular three-stranded beta-sheet. For such peptides, free energies were calculated to provide a measure of amyloid propensity. The overall agreement between the experimental and predicted data is good, and we correctly identify several self-recognition motifs proposed to define the cross-beta amyloid fibril architectures of two of the proteins. Our results compare very favorably with those obtained using atomistic molecular dynamics methods, though our simulations are 30-40 times faster.     

Hydrogels: From soft contact lenses and implants to self‐assembled nanomaterials

Hydrogels were the first biomaterials designed for clinical use. Their discovery and applications as soft contact lenses and implants are presented. This early hydrogel research served as a foundation for the expansion of biomedical polymers research into new directions: design of stimuli sensitive hydrogels that abruptly change their properties upon application of an external stimulus (pH, temperature, solvent, electrical field, biorecognition) and hydrogels as carriers for the delivery of drugs, peptides, and proteins. Finally, pathways to self‐assembly of block and graft copolymers into hydrogels of precise 3D structures are introduced. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5929–5946, 2009     

Syntheses and Crystal Structures of Two Chloro‐Bridged Coordination Polymers [Cd(BIM)Cl2]n and [Pb(BIM)Cl2]n

Two novel coordination polymers, [Cd(BIM)Cl₂]_n ( 1 ) and [Pb(BIM)Cl₂]_n ( 2 ) [wherein BIM = bis(imidazol‐1‐yl)methane], were synthesized by the reactions of the BIM ligand with CdCl₂ and PbCl₂, respectively. They were characterized by elemental analyses, IR, TGA and X‐ray single‐crystal diffraction techniques. Single‐crystal X‐ray structure analyses showed there is a pseudooctahedral arrangement around the cadmium atom in the complex 1 . It has a three‐dimensional network which contains one‐dimensional inorganic‐organic hybrid chains and μ₂‐bridging chloride ligands. A rare pentacoordinate square‐pyramidal arrangement was adopted for the lead(II) atom in the complex 2 , which has an unusual two‐dimensional layer structure of macrometallacycles crosslinked with the bridging Pb₂Cl₂ units. The metal atoms in both complexes were coordinated with two BIM ligands in cis arrangement and bridged by μ₂‐bridging chloride ligands.