聚己内酯在聚己内酯/聚乙烯基甲基醚共混体系中的结晶研究

通过示差扫描量热(DSC)、广角X射线衍射(WAXD)、小角X射线散射(SAXS)研究了聚己内酯(PCL)/聚乙烯基甲基醚(PVME)共混体系中PCL的结晶行为.研究结果表明,共混聚合物中PCL的结晶度几乎不随体系的组成而发生变化.共混物中PVME的存在没有改变PCL的晶体结构,但是随着PVME含量的增加,片晶之间的距离则大,这主要是由于非晶层增厚引起的.     

树枝状嵌段聚合物D-PCL-b-PS在不对称末端受限条件下的结晶行为

研究了树枝状嵌段聚合物聚(ε-b-己内酯)-b-聚苯乙烯(D-PCL-b-PS)的分子结构对PCL链段受限结晶行为的影响.首先,通过活性正离子开环聚合(ROP)合成了树枝状的嵌段聚合物D-PCL.在此基础上用原子转移自由基聚合(ATRP)的方法,合成了树枝状的嵌段聚合物D-PCL-b-PS,在结晶的PCL链段的两个末端...     

资源受限下森林火灾应急救援多目标调度优化

许多森林火灾由于救援资源受限而不能在第一时间扑灭,导致火灾扩大蔓延,进而造成更大的森林资源损失。因此,在救援资源受限情形下,如何对消防救援车辆进行合理的调度安排以快速和低成本地扑灭火灾已成为亟待解决的现实问题。本文研究了一类资源受限下森林火灾应急救援多目标调度优化问题,为该问题构建了多目标混合整数非线性规划模型,优化目标为同时最小化总灭火救援时间和救援车辆总行驶距离。为有效求解该问题,首先将上述非线性模型等价转化为线性模型。然后提出ε-约束法和模糊逻辑相结合的算法对问题进行求解。最后,以大兴安岭山发生的火灾案例和随机生成仿真算例对模型和算法有效性进行验证,结果表明所提出的模型和算法能够有效解决资源受限下森林火灾应急救援问题,并为决策者提供最优的消防调度方案。     

The generalized Roper-Suffridge extension operator

Let f(z) be a normalized convex (starlike) function on the unit disc D. Let , where z=(z₁,z₂,…,z_n), z₁∈D, , p_i?1, i=2,…,n, are real numbers. In this note, we prove that Φ(f)(z)=(f(z₁),f′(z₁)^1/p₂z₂,…,f′(z₁)^1/p_nz_n) is a normalized convex (starlike) mapping on Ω, where we choose the power function such that (f′(z₁))^1/p_i|_z1=0=1, i=2,…,n. Some other related results are proved.     

Thiolated poly(ε-caprolactone) macroligand with vacant coordination sites on gold substrate: Synthesis and surface characterization

Surface-confined telechelic poly(ε-caprolactone) macroligand with two distinct functional groups per polymeric chain has been synthesized and characterized. The molecular microstructure of the macroligand with regard to the properties of the end-capped functionalities and with those on surface substrate has been studied by solution and surface analytical methods (i.e., X-ray photoelectron spectroscopy (XPS), grazing angle reflectance-Fourier transform IR spectroscopy (GA-FTIR), water contact angle measurements, and atomic force microscopy (AFM)) to elucidate the structure and properties of such multifunctional polymer on gold (1 1 1) substrate.     

Interfacial Properties of Phosphate Glass Fiber/Poly(caprolactone) System Measured Using the Single Fiber Fragmentation Test

Phosphate glass fiber of the composition 20Na₂O–24MgO–16CaO–40P₂O₅ was produced using an in-house fiber drawing rig. The interfacial properties of the phosphate glass fiber/poly(caprolactone) (PCL) system were measured using the single fiber fragmentation test (SFFT). The system was calibrated using E-glass fibers and polypropylene system. This gave an interfacial shear strength (IFSS) of 4.1 MPa, which agrees well with other published data. The IFSS for the unsized (as drawn) phosphate glass fiber/PCL system was found to be 1.75 MPa. Fibers treated with 3-aminopropyl-triethoxy silane (APS) showed an IFSS of 3.82 MPa. X-ray photoelectron spectroscopic (XPS) analysis of unsized and silane sized fibers established the presence of silane on the fiber surface. Degradation tests of the silane treated fiber/PCL samples were carried out in deionised water at 37°C and it was found that the IFSS values decreased over time. Four others silanes were also investigated but APS gave the highest IFSS values.     

Sufficient conditions for the existence of global random attractors for stochastic lattice dynamical systems and applications

In this paper, we first present some sufficient conditions for the existence of a global random attractor for general stochastic lattice dynamical systems. These sufficient conditions provide a convenient approach to obtain an upper bound of Kolmogorov ε-entropy for the global random attractor. Then we apply the abstract result to the stochastic lattice sine-Gordon equation.     

Main-chain biodegradable liquid crystal based on cholesteryl end-capped polycarbonate copolymers

Main-chain biodegradable liquid crystal (LC) based on cholesteryl end-capped polycarbonate copolymers was investigated. The novel LC was synthesised through ring-opening copolymerisation of trimethylene carbonate with ε-caprolactone (CL) initiated by cholesterol, without adding any catalyst. The chemical structure of the resulting polymers was confirmed by ¹H NMR. The liquid crystalline properties were validated by X-ray diffraction, differential scanning calorimetry and polarising optical microscopy. The results showed that the synthesised polycarbonate copolymers Chol-(TMCL)x + y exhibited liquid crystallinity in particular temperature ranges because of the incorporation of the cholesterol moieties. Furthermore, the effect of CL content on the mesomorphism properties of Chol-(TMCL)_x+y was also investigated; the higher the CL content, the lower the mesomorphism properties. It might be attributed to the hindered orientation of LC caused by the crystallinity of the poly(ε-caprolactone) (PCL) segments in the polymer chain.     

利用小角/广角X射线散射联用及一维相关函数分析研究聚(ε-己内酯)片晶的形态

用小角/广角X射线散射(SAXS/WAXS)联用的实验方法考察了等温结晶温度(Tc)和等温时间对聚(ε-己内酯)(PCL)片晶形态的影响.根据WAXS数据计算了PCL的重量结晶度,进而求得其体积结晶度Vc(WAXS).在不同Tc下结晶的PCL样品的Vc(WAXS)均略高于50%.对SAXS谱线做一维相关函数(1DCF)分析,得到了PCL的片晶长周期(LP)和无定形层厚度(La).通过比较WAXS及SAXS的数据分析结果,认为PCL晶体需用"三相模型"予以描述,其过渡层厚度(E)约为LP的15%～18%,对片晶形态具有重要影响.随着Tc升高,PCL晶体的Lc、La及E均逐渐增大,但Lc的变化率最大,这使得结晶度上升.在50℃等温结晶不同时间,发现Lc随延长时间显著增加,而La及E则不断减小.等温10天后,PCL晶体的SAXS谱线上可观察到5级散射,表明片晶相当完善.     

Qualitative assessment of nanofiller dispersion in poly(ε-caprolactone) nanocomposites by mechanical testing, dynamic rheometry and advanced thermal analysis

A comprehensive overview of available methods for assessing nanofiller dispersion is presented for a wide range of layered silicate-based poly(ε-caprolactone) (PCL) nanocomposites. Focusing on their respective strengths and weaknesses, rheological, mechanical and thermal characterization approaches are evaluated in direct relation to morphological information. Pronounced changes in the rheological and mechanical properties of the materials are only observed for nanocomposites displaying the highest nanofiller dispersion levels, as confirmed by an innovative and highly reliable thermal analysis approach based on quasi-isothermal crystallization. As such, the data obtained from the different methods also allow a detailed investigation of the crucial factors affecting nanofiller dispersion, evidencing the importance of specific matrix/filler interactions and the need for proper melt processing conditions when targeting significant property enhancements. Finally, the wide potential of the developed methodologies for the characterization of polymeric nanocomposites in general is illustrated by an extension to carbon nanotube-based PCL composites, unambiguously demonstrating their complementarity and broad applicability.