镧对V2O5/γ-Al2O3催化剂在异丁烷脱氢中活性的影响

V2O5／γ-Al2O3是用于异丁烷脱氢的新型催化剂，引入适量的镧不仅可改善活性组分的分散度，提高催化脱氢活性，而且还增强了催化剂的抗积炭能力，通过FTIR，BET，TG，TPR和TEM等手段研究了镧对催化剂性能的影响。     

Effect of La2O3／γ—Al2O3 Catalyst on the Activation of CH4 and CO2 to C2 Hydrocarbons under Non—equilibrium Plasma

In the reaction of methane and carbon dioxide to C2 hydrocabons under non-equilibrium plasma, methane conversion was decreased,but selectivity of C2 hydroxarbons was increased when using La2O3/γ-Al2O3 as catalyst. So the yield of C2 hydrocarbons was higher than using plasma alone. The synergism of La2O3/γ-Al2O3 and plasma gave methane conversion of 24.9% and C2 yield of 18.1%. The distribution of C2 hydrocarbons changed when Pd-La2O3/γ-Al2O3 was used as catalyst,the major C2 product was ethylene.     

A Flexible Approach to the γ－Amino－β－hydroxy Acid Moiety of Hapalosin

A flexible approach to ethyl (3R,4S)-N-Boc-4-amino-3-hydroxy-5-phenylpentanoate (N-Boc-AHPPA-OEt), the γ-amino-β-hydroxy acid moiety of hapalosin is described. The synthetic method features a ring-opening ethanolysis of an activated N-Boc-lactam, which is obtained via a diastereoselective reductive-alkylation of (R)-malimide derivative. The flexibility of the method resides in the introduction of the alkyl side chain by Grignard reagent addition.     

超微粒γ-FeOOH的制备工艺研究

以ＦｅＣｌ２为原料，研究了γ－ＦｅＯＯＨ晶种制备和晶粒生长的反应温度、反应物浓度及配比、碱液滴加等工艺条件，得到了比较理想的合成工艺途径．结果表明，在晶种制备过程中温度及配比是影响晶种粒子形态和产物晶型的重要因素；在晶种的生长过程中，滴入体相的碱液的分散状态是宏观混合与微观混合共同作用的结果，而促进微观混合是选择优化生长工艺的判据．     

光学积分器对辐照均匀性影响的仿真分析

针对太阳模拟器设计和装调过程中光学积分器对辐照均匀性产生影响的问题,在详细阐述光学积分器工作原理的基础上,通过光学软件Zemax建立光学积分器成像模型,利用模型具体分析和研究了积分器两透镜组对应元素透镜间的光轴一致性误差对辐照均匀性的影响,并提出了消除光轴一致性误差的方法。通过实验验证了该方法的可行性与正确性。     

含1,2,3-三唑环的α,γ-二酮衍生物的合成研究

以对氯氯苄为原料,经取代、1,3-偶极环加成和缩合反应得到含1,2,3-三唑环的α,γ-二酮衍生物,其结构经1H NMR、13C NMR以及MS确证。研究表明,该α,γ-二酮化合物存在酮醇异构现象,在溶液中其酮醇异构体比例近似为1∶8。     

CH_4 reforming with CO_2 for syngas production over La_2O_3 promoted Ni catalysts supported on mesoporous nanostructured γ-Al_2O_3

Nanostructured γ-Al2O3 with high surface area and mesoporous structure was synthesized by sol-gel method and employed as catalyst support for nickel catalysts in methane reforming with carbon dioxide. The prepared samples were characterized by XRD, N2adsorption-desorption,TPR, TPO, TPH, NH3-TPD and SEM techniques. The BET analysis showed a high surface area of 204 m2 g-1and a narrow pore-size distribution centered at a diameter of 5.5 nm for catalyst support. The BET results revealed that addition of lanthanum oxide to aluminum oxide decreased the specific surface area. In addition, TPR results showed that addition of lanthanum oxide increased the reducibility of nickel catalyst. The catalytic evaluation results showed an increase in methane conversion with increasing lanthanum oxide to 3 mol% and further increase in lanthanum content decreased the catalytic activity. TPO analysis revealed that the coke deposition decreased with increasing lanthanum oxide to 3 mol%. SEM and TPH analyses confirmed the formation of whisker type carbon over the spent catalysts. Addition of steam and O2 to dry reforming feed increased the methane conversion and led to carbon free operation in combined processes.     

UHMWPE纤维的超临界CO_2辅助渗透预处理研究

利用Minitab软件设计实验,以超高分子量聚乙烯纤维(UHMWPE)为原料,研究了在不同的超临界CO_2流体状态下,处理压力、温度和时间等因素对三羟甲基丙烷三甲基丙烯酸酯(TMPTMA)渗入率的影响,确定了最佳因素设置范围;通过单因子实验优化了超临界CO_2处理工艺,并对经过电子束辐照的UHMWPE纤维凝胶含量和蠕变率进行了测试。研究结果表明:处理温度对TMPTMA的渗入率影响最大,其次为压力,时间的影响最小,确定了最优工艺条件为处理压力25MPa,温度80℃,时间30min;TMPTMA渗入率越高,电子束辐照后UHMWPE纤维的增感辐照交联效应和抗蠕变效果越好。     

预处理气氛对CuO/CeO2/γ-Al2O3催化剂表面性质及“NO+CO”反应性能的影响

用不同的预处理气氛制备了CeO₂/γ-Al₂O₃载体以调节表面Ce的价态,并以Cu(CH₃COO)₂为前驱体制备了CuCeAl催化剂。XRD和H₂-TPR的结果表明在还原气氛下处理的CeO₂/γ-Al₂O₃载体具有更多的活性氧原子,因此相应的CuCeAl催化剂表面有更多分散态的Cu²⁺/Cu⁺物种。NO+CO反应的结果表明分散态的Cu²⁺/Cu⁺是NO转化的活性物质,而Cu⁰在低温下具有较好的N₂选择性。因此,同时含有分散态Cu²⁺/Cu⁺和少量晶相Cu⁰的催化剂具有最好的催化性能。     

N-杂环卡宾催化合成取代γ-丁内酯研究进展

取代γ-丁内酯是一类非常重要的精细化学品。N-杂环卡宾(NHC)催化α,β-不饱和醛发生共轭极性反转后,与芳香醛、三氟甲基酮、酮酸酯或邻二酮等发生环化反应可一步生成不同取代的γ-丁内酯化合物。该方法具有原子经济性高、路径简捷、反应条件温和等明显的优势。本文主要结合笔者课题组的研究方向,从不同催化剂前体和不同反应底物两方面进行分类,介绍近年来NHC催化合成取代γ-丁内酯的方法及其研究进展,归纳总结了不同催化体系的优缺点,并在此基础上展望了NHC催化合成取代γ-丁内酯反应的发展趋势和应用前景。