Synthesis and herbicidal activity of O,O-dialkyl phenoxyacetoxyalkylphosphonates containing fluorine

A series of substituted phenoxyacetoxyalkylphosphonates bearing fluorine were designed and synthesized. All the new compounds were identified by elemental analysis, IR, ¹H NMR and MS and were tested for herbicidal activity in greenhouse at a rate of 1.5 kg/ha. The results of preliminary bioassay showed that fluorine moiety introduced to the core structure could help to improve the herbicidal activity, and compounds with a 3-trifluoromethyl in benzene ring exhibited higher inhibitory activity.     

X-ray photoelectron spectroscopy characterization of composite TiO2–poly(vinylidenefluoride) films synthesised for applications in pesticide photocatalytic degradation

X-ray photoelectron spectroscopy (XPS) was adopted for the analytical characterization of composite titanium dioxide–poly(vinylidenefluoride) (TiO₂–PVDF) films developed for applications in the photocatalytic degradation of pollutants.

The composites were deposited on glass substrates by casting or spin coating from TiO₂–PVDF suspensions in dimethylformamide (DMF). XPS data on the TiO₂–PVDF surface composition were used to optimize preparation conditions (composition of the TiO₂/PVDF suspension, deposition technique) in terms of titanium dioxide surface amount and film stability.

The use of spin-coating deposition and the increase of TiO₂ amount in the DMF suspensions were found to improve the titanium surface content, although high TiO₂/PVDF ratios led to film instability. PVDF–TiO₂ films were also used in preliminary photocatalytic degradation tests on isoproturon, a phenylurea herbicide, under solar UV irradiation; the results were compared to direct photolysis to evaluate the catalytic efficiency of immobilized TiO₂ and the role played by the PVDF film during the degradation process.     

A note on an SOR-like method for augmented systems

Golub et al. (2001, BIT, 41, 71–85) gave a generalizedsuccessive over-relaxation method for the augmented systems.In this paper, the connection between the SOR-like method andthe preconditioned conjugate gradient (PCG) method for the augmentedsystems is investigated. It is shown that the PCG method isat least as accurate (fast) as the SOR-like method. Numericalexamples demonstrate that the PCG method is much faster thanthe SOR-like method.     

Chemical Reactivity of Tetrasulfur Tetranitride: Synthesis,Physical Properties,and Structural Characterization of the Amorphous Phase Cu7S4N4

Tetrasulfur tetranitride, S₄N₄, reacts with elemental Cu within inert solvents to a black‐blue material of approximate composition Cu₇S₄N₄ which is totally amorphous to X‐rays and which cannot be made crystalline by either thermal treatment or electron radiation. Cu₇S₄N₄ explodes if heated above 234 °C or when subjected to mechanical shock to eventually yield copper(I) sulfide; this together with the characteristic infrared spectrum of Cu₇S₄N₄ indicates the presence of molecular S₄N₄ units inside the amorphous phase. The metastable nature of Cu₇S₄N₄ is also mirrored by electron microscopy which furthermore allows the structural characterization of its degradation products. Based on experimental EXAFS data offering characteristic Cu—N and Cu—S distances, a theoretical crystalline approximant of Cu₇S₄N₄ was suggested and structurally optimized by density‐functional total‐energy calculations including periodic boundary conditions. This model incorporates a central S₄N₄ unit bonded to three shells of Cu atoms of different functionalities; in addition, a partial rupture of the S₄N₄ unit is likely to allow for a lowering of the total energy of the metastable phase. The latter observation supports the impossibility to make Cu₇S₄N₄ crystallize using ₄N₄ crystallize using whatever kind of measures.     

Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

The Fundamental Experiments of Red Tide Chemical Forecast

Many food algae and red tide algae were cultivated in the f/2 medium, and the nitric oxide (NO) concentration of the medium and the cell density were determined. The experiments on algae were conducted when different concentrations of NO were added into the medium using two methods. The results show that low concentrations of NO were self-produced by marine algae during the exponential growth period and were about nmol/L level. But at the end of the period, i.e., 2 or 3 days before the cell density reaches the maximum, an NO peak appeared, with the NO concentration reaching 10 nmol/L. The NO threshold concentration exists according to the influence of exogenous NO on the marine phytoplankton growth. One type is the threshold concentration that can promote algae growth, and its value is between 10 and 1 nmol level, or even lower. The other type can inhibit the phytoplankton growth, which is about μmol level or higher. The results indicate that red tide algae are far more sensitive to NO than are food algae. The fundamental experimental outcome above may provide a new clue for red tide chemical forecast by inspecting the NO change.