由(1S)-cis-菊酸合成(1R)-cis-二溴菊酸

拟除虫菊脂是在研究天然除虫菊脂化学的基础上发展起来的一类高效低毒,广谱杀虫剂。其中,溴氰菊脂是活性较高,光稳定性较好的一种菊脂类杀虫剂, 它是具有(IRcis.αs) 构型的单一光学异构体。 生产溴氰菊脂的关键中间体是IR-cis-)二溴菊脂。本文报道利用化学剪切法将(is)-cis-菊脂转化为(IR-cis-)二溴菊脂的新方法。     

Surface modification of low density polyethylene (LDPE) film by low pressure O2 plasma treatment

In this work, low pressure glow discharge O₂ plasma has been used to increase wettability in a LDPE film in order to improve adhesion properties and make it useful for technical applications. Surface energy values have been estimated using contact angle measurements for different exposure times and different test liquids. In addition, plasma-treated samples have been subjected to an aging process to determine the durability of the plasma treatment. Characterization of the surface changes due to the plasma treatment has been carried out by means of Fourier transformed infrared spectroscopy (FTIR) to determine the presence of polar species such as carbonyl, carboxyl and hydroxyl groups. In addition to this, atomic force microscopy (AFM) analysis has been used to evaluate changes in surface morphology and roughness. Furthermore, and considering the semicrystalline nature of the LDPE film, a calorimetric study using differential scanning calorimetry (DSC) has been carried out to determine changes in crystallinity and degradation temperatures induced by the plasma treatment. The results show that low pressure O₂ plasma improves wettability in LDPE films and no significant changes can be observed at longer exposure times. Nevertheless, we can observe that short exposure times to low pressure O₂ plasma promote the formation of some polar species on the exposed surface and longer exposure times cause slight abrasion on LDPE films as observed by the little increase in surface roughness.     

Facilitated transport of Hg(II) through novel activated composite membranes

The results presented in this work deal with the prime application of activated composite membranes (ACMs) for the transport of Hg(II) ions in a continuous extraction–re-extraction system using di-(2-ethylhexyl)dithiophosphoric acid (DTPA) as carrier. The effects of variables such as the pH, the nature of the acid and the concentration of the casting solutions on the transport of Hg(II) are also investigated. When the ACM was prepared with a 0.5 M DTPA solution and when the feed solution contained 2.5×10^–4 M Hg(II) in 0.1 M HCl, the amount of mercury extracted was greater than 76%. The re-extracted mercury was subsequently recovered by means of a stripping phase comprising 0.3 M thiourea solution in 2 M H₂SO₄, yielding 54% of the initial amount of mercury after transport had taken place for 180 min.     

常见饮料中痕量铝的分光光度法研究

新试剂5-溴水杨基荧光酮可在pH5.5～6.8的六次甲基四胺缓冲溶液中,与铝,溴化十六烷基吡啶形成稳定的红色三元配合物。最大吸收波长约为568nm,摩尔吸光系数高达1.7×10~5L mol~(-1)·cm~1,常见金属离子很少干扰。据此,建立了测定微量铝的方法。其线性范围为0～6μg/25ml回收率在96％～103％之间。本文测定了常见饮茶,饮料及饮水中的微量铝。     

甲基膦酸二甲庚脂-HBr体系萃取色层法分离微量镉及其应用

本文提出了以 P350为固定相,硅胶为载体,1.0mol/L HBr 为流动相,采用水作洗脱液的萃取柱色层分离微量镉的新方法。研究了分离条件,萃取保留机理和干扰等。用制定的方法对铅锌矿和冶炼电转尘中微量镉进行了分离测定,均获得良好结果。回收率在95～102％之间。     

Photovoltaic and spectral properties of tetraphenyloporphyrin and metallotetraphenyloporphyrin dyes

Spectroscopical properties and photocurrent (or photovoltage) of tetraphenyloporphyrins and metallotetraphenyloporphyrins in nematic liquid crystal have been studied. Photoelectric response has been measured in an electrochemical cell made of the semitransparent semiconducting and golden electrodes with porphyrin dyes embedded in liquid crystal. Fluorescence, time-resolved luminescence in microsecond time scale and photoacoustic spectra have also been measured. The competition between radiative, non-radiative processes and charge transfer is discussed. It has been shown that effectivity of porphyrins for photocurrent generation depends on the presence/absence of central metal in the macrocycle of porphyrin skeleton and the kind of metal. The schematic model of the contributions of the dye molecule and semiconducting electrode in the electron transfer process is shown.     

A new stereoselective synthesis of 2-amino-4,5-dihydrothiophene-3-carbonitrile derivatives

A new stereoselective method for the synthesis of trans-isomers of 2-amino-4-aryl-5-benzoyl-4,5-dihydrothiophene-3-carbonitriles was proposed. The method involves base-catalyzed reactions of phenacyl thiocyanate with 3-(het)aryl-2-cyanoprop-2-enethioamides. (4R,5S/4S,5R)-2-Amino-5-benzoyl-4-(2-chlorophenyl)-4,5-ihydrothiophene-3-carbonitrile was structurally characterized by X-ray diffraction analysis. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1379–1383, July, 2007.     

Electroreductive polymerization of trans-[RuCl 2(vpy) 4] on Nd-Fe-B magnets: electrochemical impedance spectroscopy interpretation, Raman spectroscopy, X-ray photoelectron spectroscopy and scanning electron microscopy analysis

The electropolymerization of trans-[RuCl₂(vpy)₄] (vpy=4-vinylpyridine) monomer on Nd-Fe-B magnets was studied by electrochemical impedance spectroscopy (EIS). Impedance diagrams obtained during the polymerization process were used to monitor film formation. The EIS results gave insight into the electrochemical phenomena occurring at the magnet surface as the polymerization process progressed. The film structure and morphology were also studied by X-ray photoelectron spectroscopy, scanning electron microscopy and Raman spectroscopy. The Raman spectroscopy results showed that the polymerization takes place at the vinyl groups of the monomer and also that the redox polymer structure is very similar to that of the monomer. The ratio of the intensity of the XPS peaks for fluorine (from the electrolyte PF₆ ^–) and ruthenium present in the film showed that the polymer on Nd-Fe-B contained an equal proportion of Ru²⁺ and Ru³⁺, indicating that part of the film is positively charged, i.e. {[RuCl₂(vpy)₄]⁺} _n .     

An in situ STM study on the long-range surface restructuring of Au(1 1 1) in a non-chloroaluminumated ionic liquid

We report an in situ STM study of a potential-dependent long-range surface restructuring of Au(1 1 1) electrode in neat 1-butyl-3-methylimidazolium tetrafluoroborates (BMIBF₄) ionic liquid. Au(1 1 1) undergoes a significant long-range surface restructuring upon cathodic excursion to −1.0 V vs. Pt quasi-reference. The restructuring involves the formation of tiny pits, which then develops into a stable worm-like network with an average width of the network grids 2 nm. Electrochemical annealing occurs at the cathodic limit with the presence of a reduction product of cation BMI⁺. A smooth surface is recovered with the appearance of the typical (√3 × 22) reconstruction of Au(1 1 1). The surface restructuring is reestablished upon anodic excursion to −1.3 V after the adsorbed reduction product is oxidized. The long-range surface restructuring phenomenon is tentatively explained as a result of partial charge transfer to the weakly adsorbed BMI⁺, which reduces the metal–metal cohesive energy. In addition, the synergetic effect of the counter anion BF₄⁻ may also be involved. The results provide a knowledge of Au(1 1 1) electrode behavior in the neat ionic liquid and are beneficial to understanding in situ STM results involving surface morphological changes in such a media.     

Counterpoise-corrected potential energy surfaces of simple H-bonded systems

Geometries and stabilization energies of various simple H-bonded complexes (water dimer, hydrogen fluoride dimer, formamide dimer, formic acid dimer) have been determined by a gradient optimization that eliminates the basis set superposition error (BSSE) by the counterpoise (CP) method in each gradient cycle as well as by the standard gradient optimization. Both optimization methods lead to different potential energy surfaces (PES). The difference depends on the theoretical level used and is larger if correlation energy is considered. Intermolecular distances from the CP-corrected PES are consistently longer, and this difference might be significant (∼0.1 ?); also angular characteristics determined from both surfaces differ significantly. Different geometries were obtained even when passing to larger basis sets (aug-cc-pVDZ). The standard optimization procedure can result in a completely wrong structure. For example, the “quasi-linear” structure of the (HF)₂ (global minimum) does not exist at the standard MP2/ 6-31G** PES (where only cyclic structure was detected) and is found only at the CP-corrected PES. Stabilization energies obtained from the CP-corrected PES are always larger than these from the standard PES where the BSSE is added only a posteriori for the final optimized structure; both energies converge only when passing to a larger basis set (aug-cc-pVDZ). Received: 11 March 1998 / Accepted: 19 June 1998 / Published online: 4 September 1998 RID=" ID=" <E6>Acknowledgements.</E6> The project was supported by the Grant Agency of the Czech Republic (Grant No. 203/98/1166). RID=" ID=" <E5>Correspondence to</E5>: P. Hobza