Adsorption, desorption and activities of acid phosphatase on various colloidal particles from an Ultisol

Adsorption, desorption and activity of acid phosphatase on various soil colloidal particles and pure clay minerals were studied. Higher adsorption amounts and low percentage of desorption of acid phosphatase were found on fine soil clays (<0.2 μm). Electrostatic force and ligand exchange are the major driving forces that are involved in the adsorption of enzymes on soil clays. More enzyme molecules were adsorbed on soil clays in the presence of organic components. However, enzymes on organic clays were more easily released. One-third of the enzyme on goethite was adsorbed via ligand exchange process. Some other interactions, such as van der Waals force, hydrophobic force and hydrogen bonding may be more important in the adsorption of enzyme on kaolinite and the enzyme in this system cannot be easily removed. Coarse clays (0.2–2 μm) and inorganic soil clays had higher affinities for enzyme molecules than fine clays and organic clays, respectively. The activity of enzyme bound on soil clays was inhibited and the thermal stability was increased in the presence of organic matter. Data obtained in this study are helpful for a better understanding of the interactions of enzymes with inorganic and organic constituents in soil and associated environments.     

钌（Ⅱ）－联吡啶－巴比妥酸－Ce（Ⅳ）化学发光体系测定巴比妥酸的研究

利用巴比妥酸对Ｃｅ（Ⅳ）氧化钌（Ⅱ）－联吡啶化学发光反应的增强作用，建立了痕量巴比妥酸的自动脉冲注射化学发光测定法方法的检出限为１０×１０－９ｇ／ｍＬ，线性范围为５０×１０－８－６．２×１０－５ｇ／ｍＬ巴比妥酸的衍生物如巴比妥、苯巴比妥和戊巴比妥对Ｃｅ（Ⅳ）氧化钌（Ⅱ）联吡啶化学发光反应无增强作用据此对合成样中巴比妥酸作选择性检测探讨了巴比妥酸的增强机理     

Can semi-empirical models describe HCl dissociation in water?

We discuss the failure of commonly used AM1 and PM3 semiempirical methods to correctly describe acid dissociation. We focus our analysis on HCl because of its physicochemical importance and its relevance in atmospheric chemistry. The structure of non-dissociated and dissociated HCl – (H₂O) _n clusters is accounted for. The very bad results obtained with PM3 (and also with AM1) are related to large errors in gas-phase proton affinity of water and gas-phase acidity of HCl. Indeed, estimation of pKa values shows that neither AM1 nor PM3 are able to predict HCl dissociation in liquid water since HCl is found to be a weaker acid than H₃O⁺. We have proposed in previous works a modified PM3 approach (PM3-MAIS) adapted to intermolecular calculations. It is derived from PM3 by reparameterization of the core–core functions using ab initio data. Since parameters for H–Cl and O–Cl core–core interactions were not yet available, we have carried out the corresponding optimization. Application of the PM3-MAIS method to HCl dissociation in HCl–(H₂O) _n clusters leads to a huge improvement over PM3 results. Though the method predicts a slightly overestimated HCl acidity in water environment, the overall agreement with ab initio calculations is very satisfying and justifies efforts to develop new semiempirical methods.     

Production of tung oil epoxy resin using low frequency high power ultrasound

Epoxy resins made from vegetable oils are an alternative to synthesize epoxy resins from renewable sources. Tung oil is rich in α -eleostearic fatty acid, which contains three double bonds producing epoxy resins with up to three epoxy groups per fatty acid. This work studied the production of tung oil epoxy resin using hydrogen peroxide as an oxidizing agent and acetic and formic acid as percarboxylic acid precursors, applying low frequency high power ultrasound. This study evaluated the effects of ultrasound power density, hydrogen peroxide concentration, acetic acid concentration, and formic acid concentration on the yield into epoxy resin, selectivity, and by-products formation. Application of ultrasound was carried out using a 19 kHz probe ultrasound (horn ultrasound) with a 1.3 cm diameter titanium probe, 500 W nominal power, 2940 W L⁻¹ maximum effective power density applied to the reaction mixture. Ultrasound technology yielded up to 85% of epoxy resin in 3 h of reaction. The use of formic acid resulted in a slightly lower oil conversion than acetic acid but with a much higher selectivity towards epoxidized tung oil. However, using acetic acid resulted in the production of high-value by-products, such as 2-heptenal and 2,4-nonadienal. The ultrasound-assisted epoxidation showed to be particularly efficient when applied to oils containing conjugated double-bonds.     

混配配合物[Co(cpida)(C7H5N2)2]·C7H5N2·5H2O

在溶液中用N-(邻苯甲酸基)-亚氨基二乙酸、苯并咪唑和Co(Ac)2·4H2O进行自组装合成了标题三元金属混配配合物.用元素分析、红外光谱、单晶衍射对配合物的组成和结构进行了表征,确定配体N-(邻苯甲酸基)-亚氨基二乙酸中的3个羧基为单齿形式与中心金属钴离子配位.     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

抗坏血酸同顺磁离子Mn~(2+)、Gd~(3+)络会的~(13)C NMR研究

该文用顺磁离子对其近邻~(13)C核的NMR吸收增宽效应,系统地研究了抗坏血酸在不同溶剂中对金属离子Mn~(2+)、Gd~(3+)的配合行为.在水溶液中,抗坏血酸可通过两种配合方式与Mn~(2+)作用,但与Gd~(3+)的作用只有一种稳定的结构.在水中抗坏血酸对金属的配位活性部位分别是1位羟基氧,3位离解的羟基氧和6位羟基氧.在DMSO中,3位羟基由于H~+对该基团的静电遮蔽而变得对金属离子Mn~(2+)表现为配位惰性,同时6位羟基配位活性较大增强.对Gd~(3+)来说,此时没有优势配位活性部位存在.文章还讨论了抗坏血酸在H_2O-DMSO混合溶剂中的~(13)C NMR谱及在DMSO中NaOH对其~(13)C NMR谱及其与金属络合结构的影响.     

超声-硝酸联合法提取褐煤腐植酸工艺

实验考察了超声、硝酸预处理、酸化程度、碱液浓度、反应温度、液固比、反应时间等对腐植酸提取率的影响,并通过正交设计选择最佳预氧化条件和褐煤腐植酸的最佳提取条件.结果表明;超声硝酸联合氧化法提取腐植酸的最佳条件为：超声频率80kHz,氧化温度50℃,硝酸液固比（mL/g）为5∶1,氧化时间90min,硝酸浓度1.5mol/L.     

Khillah extract as inhibitor for acid corrosion of SX 316 steel

The inhibitive effect of the extract of khillah (Ammi visnaga) seeds, on the corrosion of SX 316 steel in HCl solution was determined using weight loss measurements as well as potentiostatic technique. It was found that the presence of the extract reduces markedly the corrosion rate of steel in the acid solution. The inhibition efficiency increases as the extract concentration is increased. The inhibitive effect of khillah extract was discussed on the basis of adsorption of its components on the metal surface. Negative values were calculated for the energy of adsorption indicating the spontaneity of the adsorption process. The formation of insoluble complexes as a result of interaction between iron cations and khellin, which present in the extract, was also discussed.     

Magnetic properties of multiwalled carbon nanotubes as a function of acid treatment

We investigate the electronic properties of multiwalled carbon nanotubes both before and after acid treatment with concentrated sulphuric and nitric acids. Magnetic susceptibility measurements were performed using a SQUID magnetometer and show that there is a considerable enhancement in the density of states at the Fermi level. The data shows that the diamagnetic influence from the graphitic nanotubes dominates. We experimentally observe, after acid treatment, that the diamagnetic susceptibility remains unchanged at 5 K but notably decreases at 77 K. We propose the acid treatment has increased the Van Vleck paramagnetic contribution lowering the diamagnetic response from the π-electron orbital magnetisation. The Van Vleck paramagnetic contribution is finite-temperature dependent with a diminishing contribution at higher fields.