Structural modifications of diamond like carbon films induced by MeV nitrogen ion irradiation

Diamond-like carbon (DLC) films were deposited on Si(1 0 0) substrates using plasma deposition technique. The deposited films were irradiated using 2 MeV N⁺ ions at fluences of 1×10¹⁴, 1×10¹⁵ and 5×10¹⁵ ions/cm². Samples have been characterized by using Raman spectroscopy, X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTEM). Analysis of Raman spectra shows a gradual shift of both D and G band peaks towards higher frequencies along with an increase of the intensity ratio, I(D)/I(G), with increasing ion fluence in irradiation. These results are consistent with an increase of sp² bonding. XPS results also show a monotonic increase of sp²/sp³ hybridization ratio with increasing ion fluence. Plan view TEM images show the formation of clusters in the irradiated DLC films. HRTEM micrographs from the samples irradiated at a fluence of 5×10¹⁵ ions/cm² show the lattice image with an average interplanar spacing of 0.34 nm, revealing that the clusters are graphite clusters. The crystallographic planes in these clusters are somewhat distorted compared to the perfect graphite structure.     

Electronic structure of dysprosium silicide films grown on a Si(1 1 1) surface

The thickness-dependent electronic structures of Dy silicide films grown on a Si(1 1 1) surface have been investigated by angle-resolved photoelectron spectroscopy. Two (1×1) periodic bands, both of them cross the Fermi level, have been observed in the silicide films formed by Dy coverages of 1.0 monolayer and below, and more than five () periodic bands have been observed in thicker films. Taking the () periodic structure of Dy atoms in the submonolayer silicide film into account, the periodicity of the two metallic bands indicate that they mainly originate from the orbitals of Si atoms, which form a (1×1) structure. Of the () periodic bands observed in thick films, four of them are well explained by the folding of the (1×1) bands into a () periodicity. Regarding the other band, the three () periodic bands would originate from the electronic states related to the inner Si layers that form a () structure, and the one observed in the 3.0 ML film only might originate from the electron located at the interface between bulk Si and the Dy silicide film.     

Temperature dependent photoluminescence down to 4.2 K in EuTFC

The temperature dependence of photoluminescence in Europium tris[3-(trifluoro-methylhydroxymethylene)-(+)-camphorate] (EuTFC) embedded in polymer films has been examined from 40 K down to 4.2 K with the goal of preparing sensor films for low-temperature thermal imaging. The behavior of EuTFC showed significant difference when based on polystyrene compared to poly(n-alkyl methacrylate)s. In poly(n-alkyl methacrylate)s prepared by standard methods for imaging applications, the photoluminescence is fully saturated below 30 K, whereas in polystyrene films there is a strong temperature dependence even down to 4.2 K. By optimizing the preparation procedure for films made of poly(butyl methacrylate) (PBMA) and poly(methyl methacrylate), also these polymers became very sensitive down to liquid helium temperature. The maximum temperature sensitivity of EuTFC in PBMA is found to be 1.0%/K at 4.2 K. The problem of delamination and cracking of the polymer film at cryogenic temperature is also avoided by the special preparation method.     

Dosimetric characterization of the Exradin W1 plastic scintillator detector through comparison with an in-house developed scintillator system

New commercial dosimetry systems need careful characterization and can benefit from the comparison with similar, in-house developed solutions. A comparison between such two dosimetry systems, both based on fibre-coupled organic plastic scintillator detectors, is presented. One system is the Exradin W1, fully commercialized by Standard Imaging, while the other system is the non-commercial ME40 system, developed by DTU Nutech with the aim of fundamental dosimetric research. Both systems employ plastic scintillator detectors that can be considered similar in design, calibrated using the same method, but differing primarily in the signal detection hardware. The two systems were compared with respect to essential dosimetric properties, with the purpose of testing their performance under conditions less well discussed in the literature. A Farmer ionization chamber was used as the primary reference of the comparison. The study demonstrated that the Cerenkov light ratio calibration coefficient of both systems was not constant, but changed systematically with photon beam quality to a maximum difference of 1.1%. Calibration with respect to stem effect correction should therefore be performed for every investigated beam quality when using plastic scintillator detectors. Both systems were found to be dose rate independent, even for the highest instantaneous dose rate evaluated (1.5 mGy per pulse). Low-dose measurements revealed large uncertainties for both systems, although the ME40 system handled short beam deliveries under reference conditions with accuracy and precision within 0.4%. Changes in response due to field size dependence were investigated and found to be as large as 3.3% for the W1 and 5.4% for the ME40, biasing output factor measurements in large fields. Great caution is therefore advised if using either system for measurements in large fields or under circumstances where the fibre irradiation geometry is unfavourable. Measurements of reference dose to water yielded differences up to 1.5% when compared with the Farmer ionization chamber for all investigated beam qualities.     

Influence of surface heterogeneity in electroosmotic flows—Implications in chromatography, fluid mixing, and chemical reactions in microdevices

We analyze the influence of surface heterogeneity, inducing a random ζ-potential at the walls in electroosmotic incompressible flows. Specifically, we focus on how surface heterogeneity modifies the physico-chemical processes (transport, chemical reaction, mixing) occurring in microchannel and microreactors. While the macroscopic short-time features associated with solute transport (e.g. chromatographic patterns) do not depend significantly on ζ-potential heterogeneity, spatial randomness in the surface ζ-potential modifies the spectral properties of the advection-diffusion operator, determining different long-term properties of transport/reaction phenomena compared to the homogeneous case. Examples of physical relevance (chromatography, infinitely fast reactions) are addressed.     

Nanoscale observations of the operational failure for phase-change-type nonvolatile memory devices using Ge2Sb2Te5 chalcogenide thin films

In this study, a phase-change memory device was fabricated and the origin of device failure mode was examined using transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDS). Ge₂Sb₂Te₅ (GST) was used as the active phase-change material in the memory device and the active pore size was designed to be 0.5 m. After the programming signals of more than 2×10⁶ cycles were repeatedly applied to the device, the high-resistance memory state (reset) could not be rewritten and the cell resistance was fixed at the low-resistance state (set). Based on TEM and EDS studies, Sb excess and Ge deficiency in the device operating region had a strong effect on device reliability, especially under endurance-demanding conditions. An abnormal segregation and oxidation of Ge also was observed in the region between the device operating and inactive peripheral regions. To guarantee an data endurability of more than 1×10¹⁰ cycles of PRAM, it is very important to develop phase-change materials with more stable compositions and to reduce the current required for programming.     

Transport of waves in disordered waveguides: A potential model

We study the statistical properties of wave transport in a disordered waveguide. We first derive the properties of a “building block” (BB) of length δL starting from a potential model consisting of thin potential slices. We then find a diffusion equation—in the space of transfer matrices that describe our system—which governs the evolution with the length L of the disordered waveguide of the transport properties of interest. The latter depend only on the mean free paths and on no other property of the slice distribution. The universality that arises demonstrates the existence of a generalized central-limit theorem. We have developed a numerical simulation in which the universal statistical properties of the BB found analytically are first implemented numerically, and then the various BBs are combined to construct the full waveguide. The reported results thus obtained are in good agreement with microscopic calculations, for both bulk and surface disorder.     

A local-world heterogeneous model of wireless sensor networks with node and link diversity

In this paper, we present a novel local-world model of wireless sensor networks (WSN) with two kinds of nodes: sensor nodes and sink nodes, which is different from other models with identical nodes and links. The model balances energy consumption by limiting the connectivity of sink nodes to prolong the life of the network. How the proportion of sink nodes, different energy distribution and the local-world scale would affect the topological structure and network performance are investigated. We find that, using mean-field theory, the degree distribution is obtained as an integral with respect to the proportion of sink nodes and energy distribution. We also show that, the model exhibits a mixed connectivity correlation which is greatly distinct from general networks. Moreover, from the perspective of the efficiency and the average hops for data processing, we find some suitable range of the proportion p of sink nodes would make the network model have optimal performance for data processing.     

Kaleidoscope of life: A 24-neighbourhood outer-totalistic cellular automaton

One of the challenges of cellular automaton research is finding models with a low complexity and at the same time a rich dynamics. A measure of low complexity is the number of states in the model and the number of transition rules to switch between those states. In this paper, we propose a 2-dimensional 2-state cellular automaton that-though governed by a single simple transition rule-has a sufficiently rich dynamics to be computationally universal. According to the transition rule, a cell’s state is determined by the sum of the states of the cells at orthogonal or diagonal distances one or two from the cell (distance-2 Moore neighbourhood), but not by the previous state of the cell itself. Notwithstanding its simplicity, this model is able to generate a great variety of patterns, including several types of stable configurations, oscillators and patterns that move over cellular space (gliders). We prove the computational universality of the model by constructing a universal set of logic gates (NOT and AND) from these patterns. A key element in this proof is the shifting of phases and positions of signals such that they meet the input requirements of the logic gates. Similarities of the model with classical spin systems are also discussed.     

Charge dynamics and optical properties of layered cobaltates

We study the charge dynamics and electronic structure by optical spectroscopy technique. Here we focus on the following four issues: (1) the evolution of optical spectra with Na content; (2) the spectral features specific to different regions in the phase diagram; (3) the c-axis optical response for crystal at the A-type antiferromagnetic region; (4) the optical response of misfit-layered Bi₂M₂Co₂O_y (M=Ba, Sr, Ca) and Ca₃Co₄O_y single crystals.