Electrospinning of ultrafine cellulose acetate fibers: Studies of a new solvent system and deacetylation of ultrafine cellulose acetate fibers

Electrospinning of cellulose acetate (CA) in a new solvent system and the deacetylation of the resulting ultrafine CA fibers were investigated. Ultrafine CA fibers (∼2.3 μm) were successfully prepared via electrospinning of CA in a mixed solvent of acetone/water at water contents of 10–15 wt %, and more ultrafine CA fibers (0.46 μm) were produced under basic pH conditions. Ultrafine cellulose fibers were regenerated from the homogeneous deacetylation of ultrafine CA fibers in KOH/ethanol. It was very rapid and completed within 20 min. The crystal structure, thermal properties, and morphology of ultrafine CA fibers were changed according to the degree of deacetylation, finally to those of pure cellulose, but the nonwoven fibrous mat structure was maintained. The activation energy for the deacetylation of ultrafine CA fibers was 10.3 kcal/mol. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 5–11, 2004     

ICP-AES同时测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴

采用ICP－AES法测定混合矿物素中的磷、钙、铁、铜、锌、锰、镁、钴元素含量，并对样品的溶解酸和酸用量、元素分析线的选择以及共存元素间的干扰进行了研究。该法简便、快速，精密度和准确度较好。     

Low-energy ion-assisted control of interfacial structures in metallic multilayers

A molecular dynamics method has been used to simulate the argon ion-assisted deposition of Cu/Co/Cu multilayers and to explore ion beam assistance strategies that can be used during or after the growth of each layer to control interfacial structures. A low-argon ion energy of 5–10 eV was found to minimize a combination of interfacial roughness and interlayer mixing (alloying) during the ion-assisted deposition of multilayers. However, complete flattening with simultaneous ion assistance could not be achieved without some mixing between the layers when a constant ion energy approach was used. It was found that multilayers with lower interfacial roughness and intermixing could be grown either by modulating the ion energy during the growth of each metal layer or by utilizing ion assistance only after the completion of each layers deposition. In these latter approaches, relatively high-energy ions could be used since the interface is buried and less susceptible to intermixing. The interlayer mixing dependence upon the thickness of the over layer has been determined as a function of ion energy.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

铁基超细粒子催化剂结构与还原行为的Mssbauer谱研究

铁基超细粒子催化剂具有优良的F-T反应性能。本工作利用原位Mssbauer谱辅以XRD技术研究了含有钾助剂的F-T合成铁基超细粒子催化剂的结构与还原行为,考察了催化剂组成和第二金属组分(Mn,Zn,Mg)的影响。“纯”铁超细粒子催化剂在氢气中很容易经Fe_3O_4还原为零价铁。第二金属组分的引入,一方面阻碍了催化剂的还原,另一方面稳定了Fe~(2+)的存在而使其成为还原的主要中间相,这有利于反应条件下形成类尖晶石结构的活性相。对于Fe-Mn催化剂,上述效应随锰含量的增加而更趋显著。铁基超细粒子催化剂在氢气中的还原能力依“纯”Fe>Fe-Zn>Fe-Mn>Fe-Mg的顺序递减,这在一定程度上反映了铁与第二金属组分之间相互作用的强弱。     

Co(III)氮芥配合物的合成、表征及其抗肿瘤活性的初步评价

低氧条件下,钴(Ⅲ)的氮芥配合物具有合适的还原电位,就可能还原得到比较活泼的Ｃｏ(Ⅱ)配合物,在溶液中其活性配体很快被体内的小分子取代,释放出的活性配体可以杀死低氧区内外的癌细胞,因此筛选合适的钴配合物作为低氧选择性抗癌药物的研究很有意义。本文以双 (2 氯乙基)胺(简称ＢＣＡ)为活性配体,取代乙酰丙酮为辅助配体,合成一系列Ｃｏ(Ⅲ)配合物(下图)。初步评估结果表明,其中两个配合物具有一定的低氧选择性,配合物的还原电位对药物的低氧选择性影响很大,合适的还原范围可能比较窄。1　实验部分1.1　试剂与仪器按文献[1]的方法合成…     

[Co(amp)2Cl2]2[ZnCl4]体系中两对称异构体的2D NMR研究

The two symmetrical isomers in [Co(amp)₂Cl₂]₂[ZnCl₄](amp=2-(Aminomethyl)pyridine) system were syn-thesized by general oxidation method and were separated by chromatography and recrystallization method. Their configurations were assigned by using 2D NMR techniques, particularly the NOESY NMR spectra. Solvent used was Me₂SO-d₆ with the central peak of the CD₃ septet as the reference ( ₁₃C,δ 39.37; ₁H,δ 2.49 relative to SiMe₄). Cation exchange media used was Dowex 50Wx 2(H⁺ form, 200～400mesh; Biorad).     

Synthesis of ultrafine SiC from rice hulls (husks): A plasma process

Heat-treated rice hulls have been used as precursor material for synthesis of ultrafne SiC in a RF plasma reactor. Rice hulls containing finely distributed silica and active carbon act as a source for SiC formation. The plasma-synthesized powder contained ultrafnc -SiC with excess carbon and some unreacted silica. Post-treatment processes such as oxidation and acid (HF) treatment appear to be effective in removing the excess carbon and silica.     

Ein neues Kupfercobaltboratoxid mit isolierten B2O5-Baugruppen: Cu2Co(B2O5)O

On a New Copper Cobalt Borate Oxide with Isolated B₂O₅ Units: Cu₂Co(B₂O₅)O Single crystals of a new compound with the empirical formula Cu₂CoB₂O₆ were obtained by using a B₂O₃ flux technique. X-ray single crystal technique led to a new structure type. Cu₂CoB₂O₆ crystallizes monoclinic, space group C-P2₁/c (No. 14); a = 3.2250(6); b = 14.847(1); c = 9.1171(6) Å; β = 93.67°; Z = 4. All metal sites are octahedrally coordinated and form a two dimensional framework consisting of edge sharing octahedra ribbons. In addition one observes isolated B₂O₅-units and oxygen which is not coordinated to boron. The far relation to the crystal structure of the mineral Warwickite is illustrated.